Gutermann ZONESCAN User manual

U s e r M a n u a l
Version: 1.1.0
Language: English

For any questions relating to this product, please write to:
[e-mail]

ZONESCAN INSTALL User Manual page –i
Contents
Contents .......................................................................................................................................... i
1 Safety Instructions ..................................................................................................................... 1
1.1 Symbols ................................................................................................................................................1
1.2 General Safety ....................................................................................................................................1
1.3 Intended Use.......................................................................................................................................1
2 Overview ..................................................................................................................................... 2
2.1 Introduction.........................................................................................................................................2
2.2 Features ................................................................................................................................................2
3 First Steps.................................................................................................................................... 2
3.1 Charging...............................................................................................................................................2
3.2 Android Device Requirements .....................................................................................................3
3.3 Installation ZONESCAN INSTALL Software.............................................................................. 3
3.4 Action Bar.............................................................................................................................................3
3.5 App setup wizard ..............................................................................................................................4
4 NB-IoT Wizard ............................................................................................................................ 6
4.1 NB-IoT setup.......................................................................................................................................6
4.1.1 Configuring Gateway Settings ............................................................................... 6
4.1.2 Configure NB-IoT Logger........................................................................................ 7
4.1.3 NBIoT Navigation Drawer options......................................................................... 8
4.1.4 Import NBIoT project........................................................................................... 10
4.1.5 Adding NBIoT Logger ........................................................................................... 11
4.1.6 Finalize the changes............................................................................................. 13
4.2 NB-IoT Maintenance......................................................................................................................13
4.3 NBIoT Sleep mode..........................................................................................................................16
4.4 NBIoT firmware update.................................................................................................................17
5 Alpha Wizard ............................................................................................................................ 18
5.1 Alpha Setup.......................................................................................................................................18
5.1.1 Configuring Mail Server Settings ......................................................................... 18
5.1.2 Alpha Navigation Drawer options........................................................................ 18
5.1.3 Import Alpha project ........................................................................................... 20
5.1.4 Wake up devices.................................................................................................. 21
5.1.5 Adding Alpha........................................................................................................ 21
5.1.6 Adding Measurement Point................................................................................. 23
5.1.7 Connection Test................................................................................................... 23
5.1.8 Finalize the changes............................................................................................. 24
6 Device Maintenance................................................................................................................. 25
6.1 Alpha Maintenance ........................................................................................................................25
6.2 Repeater Maintenance..................................................................................................................30
6.3 Logger Maintenance......................................................................................................................31
6.4 Project Maintenance......................................................................................................................32
7 Firmware Update...................................................................................................................... 32

ZONESCAN INSTALL User Manual page –ii
8 Offline Maps ............................................................................................................................. 34
9 Further Hints............................................................................................................................. 34
9.1 Delete project local data ..............................................................................................................34
9.2 Overview of connected devices.................................................................................................35
9.3 Navigation, Moving and Redeploying devices, and Maintenance..............................35
9.4 Check Commlink Battery..............................................................................................................37
9.5 Warning on more devices connected to GSM Alpha........................................................37
10 FAQ .......................................................................................................................................... 37
10.1 How do I change from always to just once on Android?.................................................37
10.2 How do I clear app cache on Android? ..................................................................................37
11 Support.................................................................................................................................... 38
12 Disposal................................................................................................................................... 39
13 Imprint..................................................................................................................................... 39

ZONESCAN INSTALL User Manual page –1
1 Safety Instructions
It is essential to read the operating instructions carefully and completely before using the equipment
and software for the first time. They contain important information on safety, installation, and use. Keep
these instructions in a safe place.
1.1 Symbols
Warning of dangerous situations that can cause injury and damage to the devices.
Warning of non-ionizing electromagnetic radiation.
Important notes and tips are provided. Follow these guidelines.
Never put in your household waste bin.
1.2 General Safety
The operating and maintenance personnel must read the instructions carefully before using
the equipment. Knowing all the information contained therein - in particular the warning and
safety instructions - is needed for the safe operation of the equipment, and to protect
yourself and others against potential dangers. Ignoring the warning, safety, and operating instructions
can cause injury, damage, or a considerable shortening of the equipment lifetime. Do not make any
changes or alterations to our products.
When using the software or the equipment, make sure you adhere to any applicable regulations, in
particular traffic regulations.
In case of any questions, ask your Gutermann representative.
1.3 Intended Use
ZONESCAN products, hardware, software, and accessories are exclusively intended for industrial use
and exclusively intended for leak detection on water pipes of the public water supply. In particular,
these products are not intended to be used on wastewater and gas pipes. Gutermann is not liable for
any damage caused by misuse, improper operation, and as a result of non-compliance with safety
instructions and warnings.

ZONESCAN INSTALL User Manual page –2
2 Overview
2.1 Introduction
ZONESCAN INSTALL is Gutermann’s latest installation app for professional water leak detection
systems. In the past, ZONESCAN ALPHA systems were set up using ZONESCAN mobile on a Windows
Mobile PDA. This will be replaced by ZONESCAN INSTALL, running on Android phones or tablets. This
Android mobile app handles device setup, maintenance, and firmware updates.
2.2 Features
ZONESCAN INSTALL has the following features:
•Set up of Zonescan devices
•Firmware update of the devices
•Project maintenance of these devices
•Online or downloadable hi-res offline vector maps (for latter no mobile network and SIM card is
required)
•Overview of all the connected devices are shown on the map
•Edit, delete, replace or merge devices based on the selected device type
•Upload device settings of the complete project to ZSNet
3 First Steps
3.1 Charging
To charge the Communication Link, always use the included battery charger and cable. While charging,
the red LED blinks. When the Link is fully charged, the LED switches off.

ZONESCAN INSTALL User Manual page –3
3.2 Android Device Requirements
The ZONESCAN INSTALL App works on devices with the following requirements:
Minimum: Tablet computer (or smartphone) with
•Android OS 5.0.0 or higher
•GPS
Recommended:
•Rear camera with > 3 M pixel and autofocus
•Screen size > 5’’
•Quad-core processor
•3GB of RAM
•16 or 32GB internal storage
3.3 Installation ZONESCAN INSTALL Software
To install ZONESCAN INSTALL from playstore proceed as follows:
•Go to the playstore app on your device and search for zonescan install
•Alternatively, click on the below link
•https://play.google.com/store/apps/details?id=eu.gutermann.zonescan.install
After the installation, you can start ZONESCAN INSTALL with the icon on the home screen:
3.4 Action Bar
The Action Bar, located at the top of each screen, controls app navigation and basic functions. How it
looks depends on the screen you are on. On the main screen, the Action Bar contains the following
items:
•Navigation drawer for the main actions in the app
•View to show selected project and area on the action bar
•Options menu for additional menu items.

ZONESCAN INSTALL User Manual page –4
3.5 App setup wizard
Install the app from the play-store, launch the app, and grant the necessary permissions required for
the app. Accept the license conditions to continue with the setup process. When ZONESCAN INSTALL
is launched guided tutorials are provided all through the app to help you with the working of the app.
Once the license agreement is accepted, the ‘Company Name’ screen is shown where you need to enter
your company name and select ‘continue’ to go to the ‘Project Management’ screen. Here you will find
a message asking to enter the account details, select the ‘Enable’ button to complete the account
settings process.
Navigation Drawer
for the main actions
Selected project and
area name is
displayed
Options Menu

ZONESCAN INSTALL User Manual page –5
Note: The Account Settings step cannot be skipped. You must enter the details to proceed further.
Once the account details are correctly entered, press the back button in the ‘Account Settings’ screen
as shown in the figure below. Then select the ‘Reload’ option to download the associated projects from
the ZSNet.

ZONESCAN INSTALL User Manual page –6
4 NB-IoT Wizard
4.1 NB-IoT setup
This section explains the complete setup of NB-IoT loggers: from downloading an NB-IoT project from
ZSNet to deploying the logger to uploading the changed configuration to ZS-Net cloud.
Select an NB-IoT project and click on ‘Download’ from the list of downloaded projects to load an NBIoT
project. Then select the downloaded project to configure the gateway settings.
4.1.1 Configuring GatewaySettings
Configure the gateway settings to establish contact with the Gutermann gateway.
You need to fill in the following details on the Gateway Settings screen:
•Gateway Address: Default address is set to ‘95.217.68.86’.
•Port: Default port number is set to ‘45709’. In the unlikely event that your network provider
has blocked port 45709, you can use port 8472 as an alternative.
•APN: APN of your network provider must be set.
•Username (Optional), Password (Optional), Network Operator (Optional): Leave empty unless
explicitly required by your network provider.
•Bands: Select all the bands that your network provider supports.
•Time offset: It is automatically set, and it is the same as the time offset set in ZSNet.
•Network contact time: This is the delay before the NB-IoT Logger will try to register itself at
the gateway. The default time is set to 5 min.