Gymnova Beginners Soft Springboard User manual

01/02/22
0014C
CS 30056 - 45 RUE G. DE FLOTTE
13375 MARSEILLE CEDEX 12 (FRAnCE)
TEL : [phone] FAX : [phone]
www.GyMnOvA.COM
NM101D-GB
Keep this
DocuMeNt
AsseMBly iNstructioNs for MAiNteNANce
Constantly aiming to improve our products, we reserve the right to make changes to the equipment and dimensions without further discussion.
BeGiNNers soft spriNGBoArD - 24 cM
Warning:
This equipment should be installed by a qualified individual. This equipment should only be used by one person at a time, under the
supervision of a qualified individual.
Using this equipment for purposes other than those originally intended is prohibited.
Recommendations:
- Keep these instructions for subsequent reference (inspection, maintenance, etc.).
- Periodically carry out predictive maintenance.
- Depending on how much it is used have the equipment serviced yearly or every few years.
Pack list and bulkiness of the springboard:
- 1 Pack (Ref. 0014C) - Weight : 24Kg - Dim.: 1.33 x 0,62 x 0,27m - Vol. : 0,22 m3
Tools required:
I. General maintenance:
iMportANt :
Regular cleaning of the apparatus makes it easier to spot any problems (distortion, breakage or moisture absorption).
Before each use, make a through check on good condition and correct operation of wear parts and safety elements:
- Check the condition of pads (10’) and wheels (2), (6) or (24).
- Check the condition of springs (17’), wooden tray (12’), wooden batten (13’) and wooden hinge (21’).
- Check the tightening of all fixings (4), (5), (8), (9), (11), (14), (18), (19) and (22).
- If a problem is detected or suspected, do not use the equipment as long as it has not been checked by a technician.
- Any damaged or distorted component should be replaced as quickly as possible.
- 1 open end spanner no 13
- 1 open end spanner no 10
- 1 tube spanner no. 13
- 1 tube spanner no. 10
- No. 6
Allen Key
- Plastic mesh - Phillips
screwdriver
Side viewTop view

NM101D - Page 2
II. Assembly of spare parts Kits: Create a clean area for mounting.
1. replAceMeNt of MoviNG wheels:
2. replAceMeNt of ANti-slip pADs:
Plastic mesh
Phillips
screwdriver
1’
1’
4
24
5
4
2
5
8
6
9
1’
10’
11
11
10’
10’
11
11
10’
1’
1’
10’
11
or weAr-seNsitive
floor
or olD spriNGBoArD
tiGhteN fAsteNers
without locKiNG wheels
push the pADs DowN to AvoiD
locKiNG the wheels
1 tube spanner no. 101 tube spanner no. 13 1 open end spanner no. 101 open end spanner no. 13

NM101D - Page 3
3. replAceMeNt of the wooDeN BAtteN:
4. replAceMeNt of the pAir of spriNGs:
5. replAceMeNt of the wooDeN hiNGe:
No. 6 Allen Key
17’
19
20
15
18
15
18
1’
1’
1’
1’
21’
1’
12’
12’
12’
13’
12’
12’
22
15
16
14
15
16
21’
1 tube spanner no. 13
1 tube spanner no. 13
1 tube spanner no. 13
1 open end spanner no. 13
1 open end spanner
no. 13
1 open end spanner
no. 13
plAce oNe poiNt of threAD BrAKe At the eND of
eAch screw Before tiGhteNiNG
plAce oNe poiNt of threAD BrAKe At the eND of eAch screw Before tiGhteNiNG
plAce oNe poiNt of threAD BrAKe At the eND of eAch screw Before tiGhteNiNG
Strong thread
brake
Strong Thread brake
Strong thread
brake
liGhtly GreAse
the ceNtrAl Groove
Grease

NM101D - Page 4
1’
12’
22
15
16
6. chANGiNG the full trAy AND the coMplete frAMe:
III. Storage:
Store material in a clean, dry place, away from moisture and heat. Do not store anything heavy, protruding or otherwise on the tray.
17
1
21
12
17’
17’
19
20
19
20
15
18
15
18
15
18
15
18
17
1
12
21
21’
No. 6 Allen Key 1 tube spanner no. 13 1 open end spanner
no. 13

NM101D - Page 5
To order spare parts, please provide the description, reference and delivery date of the entire
apparatus.
Constantly aiming to improve our products, we reserve the right to make changes to the equipment and
dimensions without further discussion.
This document is the propriety of Gymnova, it is confidential and shall not be reproduced.
or
spAre pArts & MAiNteNANce Kits
BeGiNNers soft spriNGBoArD - 24 cM
30 - -
29 - Set of 10 Springboards Pads + Screws 0014/44 Springboards-Mini appar.
28 1 Set of 4 Springboards Pads + Screws 0014/43 Springboards-Mini appar.
27 - Set of 10 White wheels diam. 3.5cm 0014/45 Springboards-Trampettes
26 - Set of 10 Black wheels diam. 4cm 0014/46 Springboards-Trampettes
25 - Set 10 Grey wheels d. 4cm - w-s Floors 0014/47 Springboards-Trampettes
24 - Grey wheel diameter 4cm - wear-sensitive Floor QROU4208GR Unit - Option
23 1 Set of screws for Standard Springboards 0014/40 0014C - 2130B - 2150B
22 6 Zinc plated Hexagonal head M8 x 50 screw - Included in 22 & 24
21’ 1 Wooden Hinge only Standard Springboards - 0014C - 2130B - 2150B - 2190B
21 1 Hinge + Screws Standard Springboards 0014/42 0014C - 2130B - 2150B - 2190B
20 2 Zinc plated M10 conical fan washer - Included in 18 & 24
19 2 Zinc plated Countersunk head HH M10 x 20 screw - Included in 18 & 24
18 4 Zinc plated Hexagonal head M8 x 20 screw - Included in 18 & 24
17’ 2 Spring of Beginners Soft Springboard - Included in 18
17 1 Pair Springs + Screws Begin. Soft Springboard 014/06 0014C
16 9 Zinc Plated d8 x 22 flat washer - Included / 13, 22 & 24
15 13 Zinc Plated d8 x 14 break washer - Includ. / 13, 18, 22 & 24
14 3 Zinc plated Hexagonal head M8 x 60 screw - Included in12 & 13
13’ 1 Wooden batten only of Begin. Soft tray. - Included in12 & 13
13 1 Batten + screws of Beginners Soft tray. 0014/41 Included in 12
12’ 1 Dressed tray of Begin. Soft Springboard - Included in 12
12 1 Full tray of Beginners Soft Springboard 014/02 0014C
11 4 Flat head self-drilling screw d4.8 x 19 - Included in 10
10’ 4 Springboards Pad only (Tubes 5 x 3cm) - Included in 10
10 4 Springboards Pad + Screw (Tubes 5 x 3cm) 0014/05 Unit - Includ / 1, 28, 29
9 - Zinc plated Hexagonal M6 break nut - Included in 7
8 - Zinc plated Hexagonal head M6 x 35 screw - Included in 7
7 - Pair of White wheels + Axis 5000/32 Springboards-Trampettes
6 - White wheel diameter 3.5cm (Axis 6mm) 385/06 Unit - Old version
5 2 Zinc plated Hexagonal M8 break nut - Included in 1 & 3
4 2 Zinc plated Hexagonal head M8 x 35 screw - Included in 1 & 3
3 1 Pair of Black wheels + Axis 5090/32 Springboards-Trampettes
2 2 Black wheel diameter 4cm (Axis 8mm) QROU4208NO Unit - Included in 1
1’ 1 Standard Hardened Steel Frame - Included in 1
1 1 Complete frame Standard Springboards 0014/01 0014C - 2130B - 2150B - 2190B
iteM Qty DescriptioN refereNce reMArKs
1’
3
1
10
10 10
10
3
4x2
2x2
5
x2
7
8
x2
6x2
9
x2
2x10
26
12’
12’
12
13
13
13’
14 x3
13
15
16
x3
x3
21’
21
22 x615
16
x6
x6
23
22
x3
14
x6
15
18
x4
x13
16
x9
20
x2
19
x2
25
24 x10
10’
11
10
10
10
28
29
x4
x10
27
6x10
17
18
x4
x4
19
x2
20
x2
x2
17’
15