H3C CR16000-F User manual

H3C CR16000-F Routers
Comware 7 OAA Command Reference
New H3C Technologies Co., Ltd.
http://www.h3c.com
Software version: CR16000-CMW710-R7951P01 or later
Document version: 6W100-20191122

Copyright © 2019, New H3C Technologies Co., Ltd. and its licensors
All rights reserved
No part of this manual may be reproduced or transmitted in any form or by any means without prior written
consent of New H3C Technologies Co., Ltd.
Trademarks
Except for the trademarks of New H3C Technologies Co., Ltd., any trademarks that may be mentioned in this
document are the property of their respective owners.
Notice
The information in this document is subject to change without notice. All contents in this document, including
statements, information, and recommendations, are believed to be accurate, but they are presented without
warranty of any kind, express or implied. H3C shall not be liable for technical or editorial errors or omissions
contained herein.

Preface
This command reference describes the commands of OAA.
This preface includes the following topics about the documentation:
•Audience.
•Conventions.
•Documentation feedback.
Audience
This documentation is intended for:
•Network planners.
•Field technical support and servicing engineers.
•Network administrators working with the routers.
Conventions
The following information describes the conventions used in the documentation.
Command conventions
Convention Description
Boldface Bold text represents commands and keywords that you enter literally as shown.
Italic Italic text represents arguments that you replace with actual values.
[ ] Square brackets enclose syntax choices (keywords or arguments) that are optional.
{ x | y | ... }
Braces enclose a set of required syntax choices separated by vertical bars, from which
you select one.
[ x | y | ... ]
Square brackets enclose a set of optional syntax choices separated by vertical bars,
from which you select one or none.
{ x | y | ... } *
Asterisk marked braces enclose a set of required syntax choices separated by vertical
bars, from which you select a minimum of one.
[ x | y | ... ] *
Asterisk marked square brackets enclose optional syntax choices separated by vertical
bars, from which you select one choice, multiple choices, or none.
&<1-n> The argument or keyword and argument combination before the ampersand (&) sign
can be entered 1 to n times.
# A line that starts with a pound (#) sign is comments.
GUI conventions
Convention Description
Boldface Window names, button names, field names, and menu items are in Boldface. For
example, the New User window opens; click OK.
> Multi-level menus are separated by angle brackets. For example, File > Create >
Folder.

Symbols
Convention Description
WARNING! An alert that calls attention to important information that if not understood or followed
can result in personal injury.
CAUTION: An alert that calls attention to important information that if not understood or followed
can result in data loss, data corruption, or damage to hardware or software.
IMPORTANT: An alert that calls attention to essential information.
NOTE: An alert that contains additional or supplementary information.
TIP: An alert that provides helpful information.
Network topology icons
Convention Description
Represents a generic network device, such as a router, switch, or firewall.
Represents a routing-capable device, such as a router or Layer 3 switch.
Represents a generic switch, such as a Layer 2 or Layer 3 switch, or a router that
supports Layer 2 forwarding and other Layer 2 features.
Represents an access controller, a unified wired-WLAN module, or the access
controller engine on a unified wired-WLAN switch.
Represents an access point.
Represents a wireless terminator unit.
Represents a wireless terminator.
Represents a mesh access point.
Represents omnidirectional signals.
Represents directional signals.
Represents a security product, such as a firewall, UTM, multiservice security
gateway, or load balancing device.
Represents a security module, such as a firewall, load balancing, NetStream, SSL
VPN, IPS, or ACG module.
Examples provided in this document
Examples in this document might use devices that differ from your device in hardware model,
configuration, or software version. It is normal that the port numbers, sample output, screenshots,
and other information in the examples differ from what you have on your device.
T
T
T
T





Documentation feedback
You can e-mail your comments about product documentation to [e-mail].
We appreciate your comments.

i
Contents
OAP module commands····································································1
oap connect······························································································································1
oap reboot································································································································1

1
OAP module commands
oap connect
Use oap connect to log in to the CLI of an OAP module from the device. You can also use this
command to log in to another operating system that is running on a card in the device.
Syntax
In standalone mode:
oap connect slot slot-number
In IRF mode:
oap connect chassis chassis-number slot slot-number
Views
User view
Predefined user roles
network-admin
Parameters
slot slot-number: Specifies an OAP module by its slot number. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies an OAP module in an IRF member
device by the member ID and slot number. (In IRF mode.)
Usage guidelines
To return to the CLI of the hosting device from the OAP module, press Ctrl+K.
Examples
# (In standalone mode.) Log in to the CLI of the OAP module in a slot.
<Sysname> oap connect slot 3
Press CTRL+K to quit.
Connected to OAP.
oap reboot
Use oap reboot to reboot an OAP module.
Syntax
In standalone mode:
oap reboot slot slot-number
In IRF mode:
oap reboot chassis chassis-number slot slot-number
Views
User view
Predefined user roles
network-admin

2
Parameters
slot slot-number: Specifies an OAP module by its slot number. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies an OAP module in an IRF member
device by the member ID and slot number. (In IRF mode.)
Examples
# (In standalone mode.) Reboot the OAP module in a slot.
<Sysname> oap reboot slot 3
This command might cause data loss on the hard disk if the card is not been shut down.
Continue? [Y/N]:y
Rebooting the OAP card by command…

i
Contents
OAP manager commands··································································1
display oap client info···········································································································1
display oap client summary ···································································································2
oap client close···················································································································3
oap client reboot ·················································································································3
oap enable·························································································································4
oap timer clock-sync ············································································································5
oap timer monitor ················································································································5

1
OAP manager commands
display oap client info
Use display oap client info to display OAP client information.
Syntax
display oap client info [client-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
client-id: Specifies an OAP client by its ID in the range of 1 to 255. If you do not specify this
argument, the command displays information about all OAP clients in ascending order of client IDs.
Client IDs are assigned by the OAP manager to OAP clients to uniquely identify the clients.
Usage guidelines
The OAP manager obtains OAP client information from notification packets received from OAP
clients. If the information about a field is missing, the field is not displayed.
Examples
# Display information about OAP client 1.
<Sysname> display oap client info 1
Client ID: 1
CPU: Intel(R) Pentium(R) M processor 1.40GHz
PCB Version: 3.00
CPLD Version: 1.00
Bootrom Version: 1.12
Storage Card: 256 MB
Memory: 512 MB
Harddisk: 40.0 GB
# Display information about all OAP clients.
<Sysname> display oap client info
Client ID: 1
CPU: Intel(R) Pentium(R) M processor 1.40GHz
PCB Version: 3.00
CPLD Version: 1.00
Bootrom Version: 1.12
Storage Card: 256 MB
Memory: 512 MB
Harddisk: 40.0 GB
Client ID: 2
CPU: Intel(R) Pentium(R) M processor 1.40GHz

2
PCB Version: 3.00
CPLD Version: 1.00
Bootrom Version: 1.12
Storage Card: 256 MB
Memory: 512 MB
Harddisk: 40.0 GB
Related commands
display oap client summary
display oap client summary
Use display oap client summary to display the summary registration information of OAP
clients.
Syntax
display oap client summary [client-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
client-id: Specifies an OAP client by its ID in the range of 1 to 255. If you do not specify this
argument, the command displays the summary registration information of all OAP clients in
ascending order of client IDs. Client IDs are assigned by the OAP manager to OAP clients to
uniquely identify the clients.
Examples
# Display the summary registration information of OAP client 1.
<Sysname> display oap client summary 1
Client ID: 1
Status: Registered
MAC Address: 00e0-fc0a-c3ef
Interface: GigabitEthernet3/0/1
Last registered: 02/08/2011 12:00:00
# Display the summary registration information of all OAP clients.
<Sysname> display oap client summary
Client ID: 1
Status: Registered
MAC Address: 00e0-fc0a-c3ef
Interface: GigabitEthernet3/0/1
Last registered: 02/08/2011 12:00:00
Client ID: 2
Status: Registered
MAC Address: 00e0-fa1e-03da
Interface: GigabitEthernet3/0/2

3
Last registered: 02/08/2011 13:00:00
Table 1 Command output
Field Description
Status Status of the OAP client, which is always Registered.
MAC Address MAC address of the OAP client.
Interface Interface used to communicate with the OAP client.
Last registered Registration time of the client.
Related commands
display oap client info
oap client close
Use oap client close to shut down an OAP client.
Syntax
oap client close client-id
Views
System view
Predefined user roles
network-admin
Parameters
client-id: Specifies an OAP client by its ID in the range of 1 to 255. Client IDs are assigned by
the OAP manager to OAP clients to uniquely identify the clients.
Usage guidelines
This command applies only to OAP clients on Linux.
When you execute this command for a client in registered state, the OAP manager sends a
shutdown notification to the specified OAP client. The client stops after receiving the notification.
When you execute this command for a non-existent client, an error message appears.
Examples
# Shut down OAP client 1.
<Sysname> system-view
[Sysname] oap client close 1
Related commands
display oap client summary
oap client reboot
oap client reboot
Use oap client reboot to restart an OAP client.
Syntax
oap client reboot client-id

4
Views
System view
Predefined user roles
network-admin
Parameters
client-id: Specifies an OAP client by its ID in the range of 1 to 255. Client IDs are assigned by
the OAP manager to OAP clients to uniquely identify the clients.
Usage guidelines
When you execute this command for a client in registered state, the OAP manager sends a restart
notification to the specified OAP client. The client restarts after receiving the notification. When you
execute this command for a non-existent client, an error message appears.
Examples
# Restart OAP client 1.
<Sysname> system-view
[Sysname] oap client reboot 1
Related commands
display oap client summary
oap client close
oap enable
Use oap enable to enable OAP.
Use undo oap enable to disable OAP.
Syntax
oap enable
undo oap enable
Default
OAP is disabled on an interface.
Views
Layer 2 Ethernet interface view
Layer 2 aggregate interface view
Layer 3 Ethernet interface view
Layer 3 aggregate interface view
Predefined user roles
network-admin
Examples
# Enable OAP on interface GigabitEthernet 3/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 3/0/1
[Sysname-GigabitEthernet3/0/1] oap enable

5
oap timer clock-sync
Use oap timer clock-sync to set the clock synchronization timer.
Use undo oap timer clock-sync to restore the default.
Syntax
oap timer clock-sync minutes
undo oap timer clock-sync
Default
The clock synchronization timer is set to 5 minutes.
Views
System view
Predefined user roles
network-admin
Parameters
minutes: Specifies the clock synchronization timer value in minutes, in the range of 0 to 1440.
Setting this argument to 0 disables clock synchronization.
Usage guidelines
The clock synchronization timer regularly triggers the OAP manager to send clock and time zone
synchronization notifications to OAP clients. These notifications keep the clients' clocks
synchronized to the manager's clock.
Examples
# Set the clock synchronization timer to 20 minutes.
<Sysname> system-view
[Sysname] oap timer clock-sync 20
oap timer monitor
Use oap timer monitor to set the client monitoring timer.
Use undo oap timer monitor to restore the default.
Syntax
oap timer monitor seconds
undo oap timer monitor
Default
The client monitoring timer is set to 5 seconds.
Views
System view
Predefined user roles
network-admin
Parameters
seconds: Specifies the client monitoring timer in seconds, in the range of 0 to 10. Setting this
argument to 0 disables client monitoring.

6
Usage guidelines
The client monitoring timer regularly triggers the OAP manager to send client monitoring packets to
OAP clients.
Examples
# Set the client monitoring timer to 6 seconds.
<Sysname> system-view
[Sysname] oap timer monitor 6