H3C HSW-2024G User manual

User Guide
24+2 Gigabit L2 managed PoE switch
HSW-2024G

Overview
is designed to build up rich, high-performance network security needs,the new
generation of self-developed designs Gigabit Layer 2 Managed Switch support IEEE802.3af/at
standard, maximum distance of 100 meters, only for 802.3af/at terminal equipment supply and
thus do not need to worry about damaging proprietary PoE or non-PoE standard equipment. In
addition, when PoE devices connected to it will not stop the power supply. Simple and reliable
design, automatic identification PoE demand, speed, duplex and use AutoUplink ™ network
cable type. provided some need to simplify wireless access point (AP) and IP-based
network cameras installed commercial networks. These devices away from the power outlet is
ideal for hanging on the wall or ceiling height. PoE eliminates specifically for these devices to
connect the power outlet trouble. So that a device connected to the AC power supply connection
is more difficult flexible and minimization of installation cost. Compact and flexible design,
is for those who want to use PoE to deploy the economy wireless access point (AP) and
IP-based network surveillance cameras ideal for small business networks.
Key Features
▪ 24 10/100/ 1000Mbps PoE port, 2 gigabit SFP port
▪ IEEE802.3af/at standard
▪ Power supply by Cat 5
▪ Maximum distance up to 100 meters
▪ Provide Web NMS, CLI command line, SNMP and other security in a flexible way
▪ Support IEEE 802.1Q VLAN, Port Based VLAN, MAC Based VLAN,Private VLAN
▪ Rich QoS policies
▪ Port-based, IEEE802.1p and DSCP three kinds priority mode, support Equ, SP (Strict priority),
WRR (Weighted Round Robin), SP + WRR queue scheduling algorithm four kinds to protect
business-critical data priority;
▪ support flow control function, can reasonably allocate bandwidth.
▪ Multi-level access control policy
▪ Powerful hardware ACL capabilities to support L2 ~ L3 data stream classification; supports
port-based, VLAN's ACL, easy network monitoring, traffic policing, priority marking and data
forwarding control; supports time-based ACL control, easy to achieve time precisely controlled
access needs; support port-based 802.1x authentication and MAC-based, easy to set user
access rights.
▪ Support traditional STP / RSTP / MSTP link layer protection technology
▪ Supports CLI command line (Console, Telnet, SSHV1/V2), Web NMS (http, SSL V2/V3/TLSV1),
SNMP (V1/V2c/V3) and other management methods to achieve quick and easy network
management; support user classification , identity filtering capabilities, enhanced configuration
This Model
This Model
This Nodel

security; support port data monitoring, real-time monitoring network status, easily achieve
unified management of the global network, convenient and flexible
Hardware Specifications
Network
Interface
· 10M/100M/1000Mbps RJ45 ports with PoE function (port 1 to port 24)
· 10M/100M/1000Mbps cascade power port (port 25 to port 26)
· 100M/1000Mbps cascaded optical port (port 27 to port 28)
Transmission
speed
· 100M/1000Mbps full duplex,
· Network Interface: 100BASE-T or 1000BASE-TX Ethernet RJ-45 interface
Performane
Specifications
Bandwidth: 52 Gbps (non-blocking)
Network latency (100 to 1000Mbps): Maximum 20 microsecond
(64-byte packet size)
· Network latency (1000 to 1000M bps): Maximum 20 microsecond
(64-byte packet size)
· Address database size: 8,192 MAC addresses
· Frame filtering and transmission rate:
10M port maximum 14,800 pps
100M port maximum 148,800 pps
1000M port maximum 148,8000 pps
Network
Protocol and
Standards
Compatibility
· IEEE 802.3i 10BASE-T
· IEEE 802.3u 100BASE-TX
· IEEE802.3ab 1000Base-T
· IEEE802.3z 1000Base-SX/1000Base-LX
· IEEE 802.3af/at Power over Ethernet
LEDs
Indicator
· System: Power, POE power supply
• Each port speed, connection
Power Support
· Maximum PoE power: 400W (all PoE ports, port 1 to port 24),
Single-port maximum 30W
· Maximum Power: 400W; 48V output; (various countries adopt
customized plug)

Physical
Specification
· Dimensions (L × W × H): 440mm × 350mm × 43mm
· Weight: 6kg
Environmental
Specification
· Operating temperature: 0 ℃ ~ 50 ℃
· Storage temperature: -40 ℃ ~ 70 ℃
· Operating Humidity: 10% ~ 90% RH non-condensing
· Storage Humidity: 5% ~ 90% RH non-condensing
Electromagnet
ic
Compatibility
· CE Class B
· FCC Part 15，Class B
· VCCI Class B
· C-Tick
Safety
Regulations
· CE/LVD
Certificate · CE. FCC ROHS
Warranty · 1 year
Software Specifications
PoE
POE Supply
Port power priority
System power consumption value setting
Port Power Limit Settings
LLDP&LLDP-MED
POE Over Temperature Protection
Security
Features
IP-MAC-Port-VID binding
ARP Protect
DoS Protect
Port Safety
802.1X Certificate
Guest VLAN
Access
L2~L3 Packet filtering

Control Based on port, VLAN issued
Time-based
Flow-based destination port redirection
Flow-based rate-limiting
Flow-based QoS marking
VLAN
802.1Q VLAN
Protocol Based VLAN
MAC VLAN
GARP/GVRP
Address
Table
Address Display / Query
IVL/SVL
Static MAC address settings
Dynamic MAC address management
MAC address filtering
Port
Managemen
t
Port Aggregation Manual aggregation / LACP
Port Monitoring
Port speed
Storm suppression
Spanning
Tree
STP (802.1d)
RSTP (802.1w)
MSTP (802.1s)
Spanning Tree safety
Multicast
Managemen
t
IGMP V1/V2/V3
Fast Leave
Multicast address management
Multicast VLAN
Multicast routing port
Static multicast address
Discard unknown multicast packets
Multicast Filtering
QoS
Port queue 4
Port Priority
802.1P Priority

DSCP/ToS Priority
Priority scheduling mode SP(Strict priority scheduling)
WRR( Weighted round-robin scheduling SP+WRR)
DHCP
DHCP Client
Option82
DHCP Snooping
DHCP Attack Protection
System
Maintenanc
e
Configuration import and export
System Time
PingTracert Detect
Loopback Detection
Cable detection
System Log Show / Filter
Log Server
System
Managemen
t
Web&Log HTTP&IP:192.168.0.2
User name:admin
password:admin
SSL(v2/v3/TLSv1)
CLI Telnet
Console
SSH(v1/v2)
SNMP V1/V2/V3
Cluster Management
Free software upgrades Provide software upgrade package
User Guide:
1.Check the PoE switch
(1)Please check the enclosure,RJ45 ports,LED indicators ,sure they are ok.
(2)Connect the poe switch with power,make sure the initialization of poe switch is available as
below:
POE indicator is off at the beginning when power connected
POW indicator is on and keeps
Other indicators will be on ,then off after one or two seconds
2.Connection cables:

(1)Connected the Switch to Computer or other PD( like IP camera, wireless AP) by CAT5 or 6
cables
(2)Connected the external power adapter to Switch and the power cord to AC plug
(3)Turn on the switch
Installation:
LED Indicator:
Name Status Indication
Power
On (red) The Switch is powered on.
Off The Switch is powered off.
POE
On (red) PoE function is normal
Off
No PD is connected to the corresponding
Port or the CAT5 cables damaged
Link
On (Yellow)
PD is connected correct and a valid link is
established on the port.
Off
No PD is connected to the corresponding port
or PoE function isn’t available or the CAT5
cables damaged

Caution :
1) All operation should be provided only by a qualified service technician.
2) Make sure the PDs you connected to the Switch are compliant with IEEE 802.3af.
3) Make sure the power is off before unplugging the power adapter.
4) Makes sure all PoE PDs power consumption is less than total power
5) Please avoid any heavy thing placed on the Switch.
6) Do not use this product near water, for example, in a wet basement or near a swimming pool.
7) Avoid using this product during an electrical storm. There may be a remote risk of electric
shock from lightning.
8) For outdoor use, the Switch itself should be housed inside a
protective enclosure.
9)Cutting power during a firmware upgrade can damage your device.
10)Only use attachments/accessories specified by the manufacturer.
11)Opening the switch or tampering with the warranty sticker can void your warranty.