H3C S3100-52P User manual

H3C S3100-52P Ethernet Switch
Installation Manual
Hangzhou H3C Technologies Co., Ltd.
http://www.h3c.com
Manual Version: T2-08048P-20070410-C-1.01

Copyright © 2006-2007, Hangzhou H3C Technologies Co., Ltd. and its licensors
All Rights Reserved
No part of this manual may be reproduced or transmitted in any form or by any means
without prior written consent of Hangzhou H3C Technologies Co., Ltd.
Trademarks
H3C, , Aolynk, , H3Care, , TOP G, , IRF, NetPilot,
Neocean, NeoVTL, SecPro, SecPoint, SecEngine, SecPath, Comware, Secware,
Storware, NQA, VVG, V2G, VnG, PSPT, XGbus, N-Bus, TiGem, InnoVision and
HUASAN are trademarks of Hangzhou H3C Technologies Co., Ltd.
All other trademarks that may be mentioned in this manual are the property of their
respective owners.
Notice
The information in this document is subject to change without notice. Every effort has
been made in the preparation of this document to ensure accuracy of the contents, but
all statements, information, and recommendations in this document do not constitute
the warranty of any kind, express or implied.
To obtain the latest information, please access:
http://www. h3c.com
Technical Support
[e-mail]
http://www. h3c.com

About This Manual
Related Documentation
In addition to this manual, each H3C S3100-52P Ethernet Switch documentation set
includes the following:
Manual Description
H3C S3100-52P Ethernet Switch
Operation Manual
It is used for assisting the users in
device configuration and typical
applications.
H3C S3100-52P Ethernet Switch
Command Manual It is used for assisting the users in using various commands.
Organization
H3C S3100-52P Ethernet Switch Installation Manual is organized as follows:
Chapter Contents
1 Product Overview Introduces the characteristics and technical
specifications of S3100-52P Ethernet Switches.
2 Preparing for Installation Introduces the installation preparation and
precaution of S3100-52P Ethernet Switches.
3 Installing the Switch
Introduces the procedures to install an
S3100-52P Ethernet Switch, including the setup
of the mainframe, cards, power supply, and
cables.
4 Starting up the Switch at the
Initial Boot
Introduces the booting process of an
S3100-52P Ethernet Switch, including the
power-on booting of the switch and the system
initialization.
5 Loading Boot ROM and Host
Software Introduces the ways to load BootROM and host software for an S3100-52P Ethernet Switch.
6 Maintenance and
Troubleshooting
Introduces the problems that might occur during
the installation and the booting of an S3100-52P
Ethernet Switch and the corresponding
solutions.
Appendix Lightning Protection of
the Switch Introduces lightning protection of an S3100-52P Ethernet Switch.

Conventions
The manual uses the following conventions:
I. GUI conventions
Convention Description
< > Button names are inside angle brackets. For example, click
<OK>.
[ ] Window names, menu items, data table and field names
are inside square brackets. For example, pop up the [New
User] window.
/ Multi-level menus are separated by forward slashes. For
example, [File/Create/Folder].
II. Symbols
Convention Description
Warning Means reader be extremely careful. Improper operation
may cause bodily injury.
Caution Means reader be careful. Improper operation may cause
data loss or damage to equipment.
Note Means a complementary description.
Environmental Protection
This product has been designed to comply with the requirements on environmental
protection. For the proper storage, use and disposal of this product, national laws and
regulations must be observed.