H3C S3100 Series Installation instructions

H3C S3100 Series Ethernet Switches
Command Manual
Hangzhou H3C Technologies Co., Ltd.
http://www.h3c.com
Manual Version: 20090710-C-1.06

Copyright © 2007-2009, Hangzhou H3C Technologies Co., Ltd. and its licensors
All Rights Reserved
No part of this manual may be reproduced or transmitted in any form or by any means without prior
written consent of Hangzhou H3C Technologies Co., Ltd.
Trademarks
H3C, , Aolynk, , H3Care, , TOP G, , IRF, NetPilot, Neocean, NeoVTL,
SecPro, SecPoint, SecEngine, SecPath, Comware, Secware, Storware, NQA, VVG, V2G, VnG, PSPT,
XGbus, N-Bus, TiGem, InnoVision and HUASAN are trademarks of Hangzhou H3C Technologies Co.,
Ltd.
All other trademarks that may be mentioned in this manual are the property of their respective owners.
Notice
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute the warranty of any kind, express or implied.
Technical Support
[e-mail]
http://www.h3c.com

About This Manual
Organization
H3C S3100 Series Ethernet Switches Command Manual is organized as follows:
Part Contents
1 CLI Introduces the commands used for switching between the command
levels and command level setting.
2 Login Introduces the commands used for logging into the Ethernet switch.
3 Configuration File
Management Introduces the commands used for configuration file management.
4 VLAN Introduces the commands used for configuring VLAN.
5 Management VLAN Introduces the commands used for configuring the management
VLAN.
6 IP Address-IP
Performance Introduces the commands used for IP address configuration and IP performance configuration.
7 Voice VLAN Introduces the commands used for voice VLAN configuration.
8 GVRP Introduces the commands used for GVRP configuration.
9 Port Basic Configuration Introduces the commands used for basic port configuration.
10 Link Aggregation Introduces the commands used for link aggregation.
11 Port Isolation Introduces the commands used for port isolation.
12 Port Security-Port Binding Introduces the commands used for port security configuration and
port binding.
13 DLDP Introduces the commands used for DLDP configuration.
14 MAC Address Table
Management Introduces the commands used for MAC address forwarding table management.
15 MSTP Introduces the STP-related commands.
16 Multicast Introduces the commands used for multicast configuration.
17 802.1x-System Guard Introduces the commands used for 802.1x-System Guard
configuration.
18 AAA Introduces the commands used for AAA, RADIUS, HWTACACS,
and EAD configuration.
19 MAC Address
Authentication Introduces the commands used for MAC address authentication configuration.
20 ARP Introduces the ARP-related commands.
21 DHCP Introduces the commands used for DHCP, DHCP-snooping
configuration.
22 ACL Introduces the ACL-related commands.
23 QoS-QoS Profile Introduces the commands used for QoS and QoS profile
configuration.
24 Mirroring Introduces the commands used for port mirroring.
25 Stack-Cluster Introduces the commands used for cluster management.

Part Contents
26 PoE-PoE Profile Introduces the commands used for PoE and PoE profile
configuration.
27 SNMP-RMON Introduces the commands used for SNMP and RMON configuration.
28 NTP Introduces the NTP-related commands.
29 SSH Introduces the commands used for SSH configuration.
30 File System Management Introduces the commands used for file system management.
31 FTP-SFTP-TFTP Introduces the FTP-/SFTP-/TFTP-related commands.
32 Information Center Introduces the commands used for information center configuration.
33 System Maintenance and
Debugging Introduces the commands used for system maintenance and debugging.
34 VLAN-VPN Introduces the commands used for VLAN VPN configuration.
35 HWPing Introduces the commands used for HWPing configuration.
36 IPv6 Management Introduces the commands used for IPv6 Management configuration.
37 DNS Introduces the commands used for DNS configuration.
38 Smart Link-Monitor Link Introduces the commands used for Smart Link, Monitor Link
configuration
39 Appendix Lists all the commands described in this command manual in an alphabetic
order. The parts and pages where the commands are described are also
given.
Conventions
The manual uses the following conventions:
Command conventions
Convention Description
Boldface The keywords of a command line are in Boldface.
italic Command arguments are in italic.
[ ] Items (keywords or arguments) in square brackets [ ] are optional.
{ x | y | ... }
Alternative items are grouped in braces and separated by vertical bars.
One is selected.
[ x | y | ... ]
Optional alternative items are grouped in square brackets and
separated by vertical bars. One or none is selected.
{ x | y | ... } *
Alternative items are grouped in braces and separated by vertical bars.
A minimum of one or a maximum of all can be selected.
[ x | y | ... ] *
Optional alternative items are grouped in square brackets and
separated by vertical bars. Many or none can be selected.
&<1-n> The argument(s) before the ampersand (&) sign can be entered 1 to n
times.
# A line starting with the # sign is comments.

GUI conventions
Convention Description
Boldface Window names, button names, field names, and menu items are in
Boldface. For example, the New User window appears; click OK.
> Multi-level menus are separated by angle brackets. For example, File >
Create > Folder.
Symbols
Convention Description
Means reader be extremely careful. Improper operation may cause
bodily injury.
Means reader be careful. Improper operation may cause data loss or
damage to equipment.
Means an action or information that needs special attention to ensure
successful configuration or good performance.
Means a complementary description.
Means techniques helpful for you to make configuration with ease.
Related Documentation
In addition to this manual, each H3C S3100 Series Ethernet Switches documentation set includes the
following:
Manual Description
H3C S3100 Series Ethernet Switches
Installation Manual It provides information for the system installation.
H3C S3100 Series Ethernet Switches
Operation Manual It is used for assisting the users in dataconfigurations and typical applications.
H3C S3100 Series Ethernet Switches
Compliance and Safety Manual
It lists the regulatory compliance statements and
provides the safety information of H3C S3100 series
Ethernet switches.
Obtaining Documentation
You can access the most up-to-date H3C product documentation on the World Wide Web at this URL:
http://www.h3c.com.
The following are the columns from which you can obtain different categories of product documentation:
[Products & Solutions]: Provides information about products and technologies, as well as solutions.
[Technical Support & Document > Technical Documents]: Provides several categories of product
documentation, such as installation, configuration, and maintenance.
[Technical Support & Document > Software Download]: Provides the documentation released with the
software version.

Documentation Feedback
You can e-mail your comments about product documentation to [email protected].
We appreciate your comments.