H3C S5500-SI Series User manual

H3C S5500-SI Series Ethernet Switches
Operation Manual
Hangzhou H3C Technologies Co., Ltd.
http://www.h3c.com
Manual Version: 20071208-C-1.01

Copyright © 2007, Hangzhou H3C Technologies Co., Ltd. and its licensors
All Rights Reserved
No part of this manual may be reproduced or transmitted in any form or by any means
without prior written consent of Hangzhou H3C Technologies Co., Ltd.
Trademarks
H3C, , Aolynk, , H3Care, , TOP G, , IRF, NetPilot,
Neocean, NeoVTL, SecPro, SecPoint, SecEngine, SecPath, Comware, Secware,
Storware, NQA, VVG, V2G, VnG, PSPT, XGbus, N-Bus, TiGem, InnoVision and
HUASAN are trademarks of Hangzhou H3C Technologies Co., Ltd.
All other trademarks that may be mentioned in this manual are the property of their
respective owners.
Notice
The information in this document is subject to change without notice. Every effort has
been made in the preparation of this document to ensure accuracy of the contents, but
all statements, information, and recommendations in this document do not constitute
the warranty of any kind, express or implied.
To obtain the latest information, please access:
http://www. h3c.com
Technical Support
[e-mail]
http://www. h3c.com

About This Manual
Related Documentation
In addition to this manual, each H3C S5500-SI Series Ethernet Switches
documentation set includes the following:
Manual Description
H3C S5500-SI Complete Series
Ethernet Switches Installation Manual It provides information for the system installation.
H3C S5500-SI Series Ethernet Switches
Command Manual It is used for assisting the users in using various commands.
Organization
H3C S5500-SI Series Ethernet Switches Operation Manual is organized as follows:
Part Contents
0 Overview Introduces the system features, service features, and
network application of the switches.
1 Login Introduces the ways to log into an Ethernet switch.
2 VLAN Introduces VLAN basics and the related configuration.
3 IP Addressing and IP
Performance Introduces IP address and IP performance fundamental and the related configuration.
4 QinQ-BPDU TUNNEL Introduces QinQ and the related configuration
5 Port Correlation
Configuration Introduces basic port configuration, link aggregation, and port isolation configuration.
6 Link Aggregation Introduces link aggregation fundamental and the
related configuration.
7 MAC Address Table
Management Introduces MAC address forwarding table and the related configuration.
8 Port Security Introduces port security and the related configuration.
9 MSTP Introduces STP and the related configurations.
10 IPv6 Introduces IPv6 basic configuration and application.
11 IP Routing Overview Introduces the overview of Routing.
12 IPv4 Routing Introduces IPv4 routing related configurations, such as
static routing, RIP, and route policy.

Part Contents
13 IPv6 Routing Introduces IPv6 routing related configurations, such as
static routing, RIPng, and route policy.
14 Multicast Introduces the IGMP-snooping-related configurations.
15 802.1x-HABP-MAC
Authentication Introduces 802.1x, HABP and MAC related configurations.
16
AAA-RADIUS-HWTACA
CS
Introduces AAA, RADIUS, HWTACACS, and the
related configurations.
17 ARP Introduces ARP and the related configuration.
18 DHCP Introduces DHCP Relay, DHCP-Snooping, BOOTP
client and the related configuration.
19 ACL Introduces ACL and the related configuration.
20 QoS Introduces QoS and the related configuration.
21 Port Mirroring Introduces port mirroring and the related configuration.
22 UDP Helper Introduces UDP Helper and the related configuration.
23 Cluster Management Introduces cluster and the related configuration.
24 SNMP-RMON Introduces the configuration to manage network
devices through SNMP and RMON.
25 NTP Introduces NTP and the related configuration.
26 DNS Introduces DNS and the related configuration.
27 File System
Management Introduces basic configuration for file system management.
28 Information Center Introduces the configuration to analyze and diagnose
networks using the information center.
29 System Maintaining
and Debugging Introduces daily system maintenance and debugging.
30 NQA Introduces NQA and the related configuration.
31 SSH Introduces SSH2.0 and the related configuration.
32 Track Introduces Track and the related configuration.
33 PoE Introduces PoE, PoE profile and the related
configuration.
34 SSL-HTTPS Introduces SSL, HTTPS and the related configuration.
35 PKI Introduces PKI and the related configuration.
36 Stack Management Introduces Stack Management and the related
configuration.
37 Appendix Lists the acronyms used in this manual.

Conventions
The manual uses the following conventions:
I. Command conventions
Convention Description
Boldface The keywords of a command line are in Boldface.
italic Command arguments are in italic.
[ ] Items (keywords or arguments) in square brackets [ ] are
optional.
{ x | y | ... }
Alternative items are grouped in braces and separated by
vertical bars. One is selected.
[ x | y | ... ]
Optional alternative items are grouped in square brackets
and separated by vertical bars. One or none is selected.
{ x | y | ... } *
Alternative items are grouped in braces and separated by
vertical bars. A minimum of one or a maximum of all can be
selected.
[ x | y | ... ] *
Optional alternative items are grouped in square brackets
and separated by vertical bars. Many or none can be
selected.
&<1-n> The argument(s) before the ampersand (&) sign can be
entered 1 to n times.
# A line starting with the # sign is comments.
II. GUI conventions
Convention Description
< > Button names are inside angle brackets. For example, click
<OK>.
[ ] Window names, menu items, data table and field names
are inside square brackets. For example, pop up the [New
User] window.
/ Multi-level menus are separated by forward slashes. For
example, [File/Create/Folder].
III. Symbols
Convention Description
Warning Means reader be extremely careful. Improper operation
may cause bodily injury.

Convention Description
Caution Means reader be careful. Improper operation may cause
data loss or damage to equipment.
Note Means a complementary description.