H3C S12510-X User manual

The air filter is installed at the air intake vents to prevent dust from entering the chassis.
防尘网用于安装在机箱散热风道的进风口处，可以阻止灰尘进入机箱。
Pay attention to electricity when you replace the air filter on an operating switch.
在设备运行状态下进行防尘网的更换时，请注意用电安全。
Clean the air filter every three months to ensure proper ventilation and heat dissipation
of the switch.
防尘网使用时间过长，空气中的灰尘可能会将防尘网的通气孔堵住，影响设备的正常通
风散热，建议每三个月定期清洗一次。
This air filter applies to the S12510-X and S12510-F switches. Attach the air filter to the air
filter tray by using screws, and then install the tray to the air intake vents at the lower part of
the chassis front.
该防尘网适用于S12510-X和S12510-F交换机，通过螺钉固定在塑胶面板上,安装于机箱正面
下方的进风口处（覆盖进风口及电源槽部分）。
Positioning pin
定位销
Locking tab
卡接机构
Mark
底部标识
Air Filter Overview
Air Filter Tray 塑胶面板示意图
Air Filter Replacement 防尘网的更换
1

To access the most up-to-date H3C product documentation on the H3C website at
www.h3c.com.hk:
1. Go to http://www.h3c.com.hk/Technical_Documents.
2. Choose the desired product category and model.
您可以访问 H3C 网站（www.h3c.com）获取最新的产品配套资料：
1. 请访问网址：http://www.h3c.com/cn/Technical_Documents；
2. 选择产品类别和产品型号，即可查询和下载与该产品相关的手册。
Copyright © 2017, New H3C Technologies Co., Ltd.
For more information about the product and installation procedures, log in to www.h3c.com.hk
Copyright © 2017 新华三技术有限公司 版权所有，保留一切权利。
如需了解产品及安装方面的更多信息，请登录 H3C 网站 www.h3c.com.hk
Press the locking tabs on both sides of the air filter tray and pull the tray outward until it is
completely separated from the chassis.
双手按住塑胶面板两侧的卡接机构，稍用力将面板水平拉出，直至其完全脱离机箱，松开
双手。
Removing an Air Filter 拆卸防尘网
3