Habasit AT-306 Configuration guide

SKIVING DEVICE
Type: AT-306
GENERAL MANUAL
USE AND MAINTENANCE
ORDER : S.N.:
Habasit Italiana S.p.A. - Via A. Meucci 8 Zona Industriale - I - 31029 Vittorio Veneto
This document is the property of HABASIT ITALIANA and, therefore, must not be passed on to persons or Bodies outside the
sphere of the Company unless previously authorized by the Technical Department for Industrial and Quality Systems.

Habasit Italiana S.p.A.
Vittorio Veneto 31029 (TV)
Tel.: ++39(0)438.9113
Fax. ++39(0)438.200545
Skiving device AT-306
Author: S.D.T. / KM INDEX
Edition: 02/2005 Page 1
Replaces: 01/2001
FOREWORD
IMPORTANT
BEFORE INSTALLING, SETTING UP AND OPERATING THE SKIVING DEVICE, THE CUSTOMER
MUST CAREFULLY READ THIS MANUAL AND CAREFULLY FOLLOW THE INSTRUCTIONS IT
CONTAINS IN ORDER TO ENSURE THE SKIVING DEVICE IS USED SAFELY AND CORRECTLY.
ALL OPERATORS AND/OR MAINTENANCE PERSONNEL MUST KNOW THIS MANUAL TO ENABLE
THEM TO WORK SAFELY ON THE SKIVING DEVICE.
Skiving device AT-306

Habasit Italiana S.p.A.
Vittorio Veneto 31029 (TV)
Tel.: ++39(0)438.9113
Fax. ++39(0)438.200545
Skiving device AT-306
Author: S.D.T. / KM INDEX
Edition: 02/2005 Page 2
Replaces: 01/2001
SUMMARY
A. REGULATIONS AND GENERAL WARNING NOTES................................................................A-1
A.1 Reading assistance notes ............................................................................................................A-2
A.2 How the manual is organized.......................................................................................................A-3
A.3 Use criteria....................................................................................................................................A-4
A.4 Guarantee conditions....................................................................................................................A-5
A.4.1 Guarantee terms and validity........................................................................................................A-5
A.4.2 When the guarantee can be voided..............................................................................................A-5
A.5 Visual signs...................................................................................................................................A-6
A.5.1 Signs.............................................................................................................................................A-6
A.6 Safety warnings............................................................................................................................A-9
A.7 Remaining risks..........................................................................................................................A-10
A.8 Qualification of personnel...........................................................................................................A-11
A.9 References and standards .........................................................................................................A-12
A.9.1 Applicable EU Directives ............................................................................................................A-12
A.9.2 EU Directives concerning safety in the workplace .....................................................................A-12
A.9.3 EU Directives concerning personal protection ...........................................................................A-12
A.9.4 EU Directives concerning environmental protection...................................................................A-12
B. TECHNICAL SPECIFICATIONS..................................................................................................B-1
B.1 Purpose of the skiving device.......................................................................................................B-2
B.2 Identification data of the equipment..............................................................................................B-3
B.3 Technical specifications................................................................................................................B-4
B.4 Equipment and accessories provided...........................................................................................B-5
B.4.1 Base unit.......................................................................................................................................B-5
B.4.2 Skiving unit ...................................................................................................................................B-5
B.4.3 Control panel ................................................................................................................................B-5
B.4.4 Electrical cabinet...........................................................................................................................B-5
B.4.5 Accessories provided....................................................................................................................B-5
B.4.6 Consumables................................................................................................................................B-6
B.5 Ordering of accessories and spare parts......................................................................................B-6
C. INSTALLATION ...........................................................................................................................C-1
C.1 Preparation of working area .........................................................................................................C-2
C.2 Packing and handling...................................................................................................................C-3
C.2.1 Handling........................................................................................................................................C-3
C.3 Assembling and installation..........................................................................................................C-4
C.3.1 Preliminary check .........................................................................................................................C-4
C.3.2 Positioning....................................................................................................................................C-4
C.3.3 Electrical connection.....................................................................................................................C-5
C.4 Equipment disassembly................................................................................................................C-6
C.5 Storage.........................................................................................................................................C-7
C.6 Disposal........................................................................................................................................C-8
Skiving device AT-306

Habasit Italiana S.p.A.
Vittorio Veneto 31029 (TV)
Tel.: ++39(0)438.9113
Fax. ++39(0)438.200545
Skiving device AT-306
Author: S.D.T. / KM INDEX
Edition: 02/2005 Page 3
Replaces: 01/2001
D. OPERATION ................................................................................................................................D-1
D.1 General warnings..........................................................................................................................D-2
D.2 Guards installed............................................................................................................................D-3
D.3 Start up.........................................................................................................................................D-4
D.3.1 Calibration of the zero line............................................................................................................D-4
D.3.2 Setting up of the skiving angle......................................................................................................D-4
D.4 Skiving of the belt/tape ends ........................................................................................................D-5
D.5 Machine emergency stop .............................................................................................................D-5
D.6 Technical assistance ....................................................................................................................D-6
D.7 Troubleshooting............................................................................................................................D-6
E. ORDINARY MAINTENANCE.......................................................................................................E-1
E.1 General.........................................................................................................................................E-2
E.2 General warnings..........................................................................................................................E-3
E.3 Routine and scheduled maintenance...........................................................................................E-4
E.3.1 Preliminary operations..................................................................................................................E-4
E.3.2 Replacing of the skiving roller.......................................................................................................E-5
E.3.3 Replacing of the emery paper ......................................................................................................E-5
E.3.4 Replacing of the transmission belt................................................................................................E-5
E.3.5 Replacing of the wear plate..........................................................................................................E-6
F. EXTRAORDINARY MAINTENANCE........................................................................................... F-1
F.1 Extraordinary maintenance...........................................................................................................F-2
F.1.1 Adjustments, replacements and synchronization.........................................................................F-2
G. ILLUSTRATIONS.........................................................................................................................G-1
G.1 Overall view of AT-306 .................................................................................................................G-2
G.2 Skiving unit ...................................................................................................................................G-3
G.3 Control panel ................................................................................................................................G-5
G.4 Detail views of AT-306..................................................................................................................G-6
Skiving device AT-306

Habasit Italiana S.p.A.
Vittorio Veneto 31029 (TV)
Tel.: ++39(0)438.9113
Fax. ++39(0)438.200545
Skiving device AT-306
Author: S.D.T. / KM INDEX
Edition: 02/2005 Page 4
Replaces: 01/2001
SUMMARY OF THE FIGURES
FIGURE 1–MACHINE IDENTIFICATION PLATE................................................................................................B-3
FIGURE 2–OVERALL VIEW OF AT-306........................................................................................................G-2
FIGURE 3–SKIVING UNIT FROM THE LEFT....................................................................................................G-3
FIGURE 4–SKIVING UNIT FROM THE RIGHT..................................................................................................G-4
FIGURE 5–CONTROL PANEL OF AT-306.....................................................................................................G-5
FIGURE 6–DISASSEMBLING OF THE SKIVING ROLLER...................................................................................G-6
FIGURE 7–REPLACEMENT OF THE WEAR PLATE ..........................................................................................G-6
FIGURE 8–THE TRANSMISSION BELT ..........................................................................................................G-6
SUMMARY OF TABLES
TABLE 1–DANGER SIGNS ..........................................................................................................................A-6
TABLE 2–TERMS AND DEFINITIONS ............................................................................................................A-7
TABLE 3–QUALIFICATIONS ......................................................................................................................A-11
TABLE 4–ELECTRICAL CHARACTERISTICS...................................................................................................B-4
TABLE 5–DIMENSIONS AND ENVIRONMENTAL CHARACTERISTICS .................................................................B-4
TABLE 6–CHARACTERISTICS OF WORKABLE ELEMENTS...............................................................................B-4
TABLE 7–ACCESSORIES PROVIDED............................................................................................................B-5
TABLE 8–CONSUMABLES ..........................................................................................................................B-6
TABLE 9–STORAGE CONDITIONS ...............................................................................................................C-7
TABLE 10 –PERIODIC MAINTENANCE WORK...................................................................................................E-6
Skiving device AT-306

Habasit Italiana S.p.A.
Vittorio Veneto 31029 (TV)
Tel.: ++39(0)438.9113
Fax. ++39(0)438.200545
Skiving device AT-306
Author: S.D.T. / KM REGULATIONS AND GENERAL WARNING NOTES
Edition: 02/2005 Page A-1
Replaces: 01/2001
A. REGULATIONS AND GENERAL WARNING NOTES
Skiving device AT-306

Habasit Italiana S.p.A.
Vittorio Veneto 31029 (TV)
Tel.: ++39(0)438.9113
Fax. ++39(0)438.200545
Skiving device AT-306
Author: S.D.T. / KM REGULATIONS AND GENERAL WARNING NOTES
Edition: 02/2005 Page A-2
Replaces: 01/2001
A.1 Reading assistance notes
Meanings of notes used in this manual:
ATTENTION
Note of particular interest for the safety of the people running and maintaining the skiving device.
WARNING
Note of particular interest concerning the safety of the skiving device.
NOTE
A request for the reader’s attention referred to the subsequent paragraph.
Skiving device AT-306

Habasit Italiana S.p.A.
Vittorio Veneto 31029 (TV)
Tel.: ++39(0)438.9113
Fax. ++39(0)438.200545
Skiving device AT-306
Author: S.D.T. / KM REGULATIONS AND GENERAL WARNING NOTES
Edition: 02/2005 Page A-3
Replaces: 01/2001
A.2 How the manual is organized
This skiving device was designed, built and tested by expert technicians. The high quality materials used
to build the skiving device make it operationally highly reliable.
For further, more detailed information or in regard to problems, please contact the following address:
Habasit Italiana S.p.A.
Via A. Meucci 8
Zona Industriale
I - 31029 Vittorio Veneto
Tel.: [phone]
Fax: [phone]
This manual observes the organizational rules and requirements of Directive 98/37/CE, duly amended,
being the Directive of the Council of the European Community of June 14, 1989, concerning the
reconciliation of the laws of member states regarding machines, also known as the «Machine Directive»,
and also all the other Directives and Regulations referred to in the said Machine Directive, inspired by
criteria which, in addition to illustrating the technical characteristics of the machine and its use,
maintenance and troubleshooting methods, also clearly indicate the following:
All the protection measures adopted on the skiving device, fully integrating design safety planning and
construction safety.
All protection measures to be adopted to meet those risks that cannot be completely eliminated.
All indications for the training of personnel using the skiving device, while indicating where it is necessary
to provide for individual safety protection devices.
The manual is divided up into sections. Each section deals with a specific subject in which every aspect
of safety is considered and clearly highlighted in the text.
Skiving device AT-306

Habasit Italiana S.p.A.
Vittorio Veneto 31029 (TV)
Tel.: ++39(0)438.9113
Fax. ++39(0)438.200545
Skiving device AT-306
Author: S.D.T. / KM REGULATIONS AND GENERAL WARNING NOTES
Edition: 02/2005 Page A-4
Replaces: 01/2001
A.3 Use criteria
HABASIT requests the Customer to fully read this manual on delivery of the skiving device it
accompanies, and always before attempting any action on the skiving device. This manual is arranged to
supply all the instructions, indications and warnings the user may need in order to know the skiving
device, understand its operating principles, and to be adequately informed to ensure safe use.
In addition to the instructions in this manual, we would ask users to observe any specific current laws.
This manual must be considered as an essential part of the machine. Its content must be made known to
the entrusted maintenance persons and users.
The purpose is to provide all the information required for good, correct use of the device.
The manual must be kept throughout the life of the skiving device and must be updated in the event of
modifications aimed at improving the device’s performance.
The manual must be available to qualified personnel.
Consultation of this manual is facilitated by the general index on the first page, which makes it possible to
immediately find the subject of interest.
If the subject dealt with is particularly important it is highlighted with references to the type of technical
personnel required to intervene.
All updates HABASIT considers necessary to improve the quality of the skiving device will be
communicated by way of sending further specific documentation or a new manual to replace the previous
one.
If the skiving device is sold to another customer, the manual must accompany the skiving device and the
new customer must be notified to HABASIT for any future modifications and updates.
A copy of this manual, delivered with the skiving device, is meant for the maintenance operators, who
shall read and keep it near the skiving device, and consult it before undertaking any action on the skiving
device.
Skiving device AT-306

Habasit Italiana S.p.A.
Vittorio Veneto 31029 (TV)
Tel.: ++39(0)438.9113
Fax. ++39(0)438.200545
Skiving device AT-306
Author: S.D.T. / KM REGULATIONS AND GENERAL WARNING NOTES
Edition: 02/2005 Page A-5
Replaces: 01/2001
A.4 Guarantee conditions
A.4.1 Guarantee terms and validity
The manufacturer guarantees the product against any faults either in materials or in workmanship, for 1
(one) year from the date of installation of the product at the Buyer’s premises. In this case, the
manufacturer shall limit itself to replacing or repairing any part or parts returned to the manufacturer,
which was/were found to be faulty.
The manufacturer may, at his own discretion, also replace or repair any part or parts of the product being
repaired that is/are felt to be defective.
The manufacturer shall have the sole right to decide if such parts should be repaired or replaced.
The manufacturer shall not be liable in any other case for collateral or incidental damage.
The guarantee does not apply to plant that has been repaired by third parties that have NOT been
authorized by the manufacturer.
Spare parts supplied by the manufacturer must be used. Any deviation from this rule will mean the
guarantee will not apply.
A.4.2 When the guarantee can be voided
The manufacturer's guarantee for the plant and associated equipment may be annulled as a result of
improper intervention or repairs.
The manufacturer's guarantee for the equipment may be annulled as a result of the use of improper
materials or materials not supplied by the manufacturer.
This manual’s instructions must be observed or the guarantee cover will be lost.
IMPORTANT
HABASIT CANNOT BE HELD RESPONSIBLE FOR ANY DAMAGE CAUSED BY IMPROPER,
INCORRECT AND UNREASONABLE USE OF THE SKIVING DEVICE.
Skiving device AT-306

Habasit Italiana S.p.A.
Vittorio Veneto 31029 (TV)
Tel.: ++39(0)438.9113
Fax. ++39(0)438.200545
Skiving device AT-306
Author: S.D.T. / KM REGULATIONS AND GENERAL WARNING NOTES
Edition: 02/2005 Page A-6
Replaces: 01/2001
A.5 Visual signs
ATTENTION
Visual signs – indicator notices – are applied to the skiving device. A knowledge of their meaning helps
ensure that safety regulations are observed to prevent accidents and assure good operation.
All people approaching the skiving device must have a clear understanding of the symbol and its
meaning. Non observance may cause accidents entailing damage to personnel and to the skiving device.
A.5.1 Signs
The signs affixed to the skiving device are shown below. Such signs enable staff operating or working on
the skiving device to know about and so prevent the dangers and risks of not observing the principal
safety rules.
TABLE 1–DANGER SIGNS
Attention: DANGER OF ELECTRIC SHOCKS
Indicates the personnel involved that, if the described operation is not
performed while observing safety regulations, there is a risk of suffering an
electric shock.
Attention: DANGER OF CRUSHING OF OR INJURIES TO HANDS
AND FINGERS
Indicates the presence of materials which can cause damage to limbs. Do
not remove safety devices.
Attention: MOVING PLATE
Indicates the presence of moving material which could cause injuries.
Skiving device AT-306

Habasit Italiana S.p.A.
Vittorio Veneto 31029 (TV)
Tel.: ++39(0)438.9113
Fax. ++39(0)438.200545
Skiving device AT-306
Author: S.D.T. / KM REGULATIONS AND GENERAL WARNING NOTES
Edition: 02/2005 Page A-7
Replaces: 01/2001
TABLE 2–TERMS AND DEFINITIONS
TERM DEFINITION
PROTECTION DEVICES
Safety measures involving the use of specific technical means called
protection devices (guards, safety devices) to protect persons from
dangers that cannot be reasonably eliminated or sufficiently reduced in
the design of the machine.
GUARD
A part of the machine specifically used to provide protection by the use
of a physical barrier. Depending on how it is made, a guard may be
called a cowling, cover, screen, door or fence etc.
Note 1 - A guard may act: - alone; in which case it is effective only when
closed - associated with a locking device with or without locking the
guard; in this case protection is assured whatever the position of the
guard.
Note 2 - «Closed» means, in the case of a fixed guard, «kept in
position».
FIXED GUARD
Guard kept in position (i.e. closed), by means of a fastening (screws,
bolts etc.) that make its removal/opening impossible without the use of
tools.
MOBILE GUARD
Guard that is generally mechanically connected to the frame of the
machine or to nearby fixed element (by means for example of hinges or
guides), and that can be opened without the use of tools.
INTERLOCKED MOBILE
GUARD
Guard associated with an interlock device so that: The machine's
dangerous functions «protected» by the guard cannot be carried out
unless the guard has been closed
− If the guard is opened during the unfolding of the machine's dangerous
functions, a stop command is given
− The closure of the guard permits execution of the machine's dangerous
functions «protected» by the guard but it does not control the start up.
Skiving device AT-306

Habasit Italiana S.p.A.
Vittorio Veneto 31029 (TV)
Tel.: ++39(0)438.9113
Fax. ++39(0)438.200545
Skiving device AT-306
Author: S.D.T. / KM REGULATIONS AND GENERAL WARNING NOTES
Edition: 02/2005 Page A-8
Replaces: 01/2001
SAFETY DEVICE Eliminates or reduces the risk, either alone or in association with a
guard.
INTERLOCK DEVICE
(INTERBLOCK)
A mechanical or electrical or other kind of device whose aim is to prevent
elements of the machine from functioning under specified conditions
(generally until the guard is closed).
PROTECTION
STRUCTURE
A physical obstacle such as a guard or part of the machine that limits the
movement of the body and/or one of its parts. The safety distances have
been determined on the basis of the requisites at point 4.1.1 of the
standard UNI EN294.
SAFETY DISTANCE
The minimum distance a protective structure must be positioned with
respect to a dangerous area. The safety distances have been
determined on the basis of the requisites at point 4.1.1 of the standard
UNI EN294.
INDIVIDUAL
PROTECTION DEVICE
Safety devices such as gloves, shoes, helmet, visor, earplugs etc. aimed
at protecting parts of the body.
CONTROL CIRCUIT A circuit used to control the working of the machine and protect the power circuits.
CONTROL DEVICE
A device inserted into a control circuit and used to control the working of
the machine (e.g. position sensors, manual control switches, relays and
electromagnetic valves).
Skiving device AT-306

Habasit Italiana S.p.A.
Vittorio Veneto 31029 (TV)
Tel.: ++39(0)438.9113
Fax. ++39(0)438.200545
Skiving device AT-306
Author: S.D.T. / KM REGULATIONS AND GENERAL WARNING NOTES
Edition: 02/2005 Page A-9
Replaces: 01/2001
A.6 Safety warnings
When using industrial machines and systems, one should be aware that moving mechanical parts (linear
or rotary movement), high voltage electrical parts, and any parts at high temperature, etc, can cause
serious damage to persons and materials.
In designing and building the skiving device, the Manufacturer focused special attention on safety in order
to supply a SAFE skiving device and, therefore, the Manufacturer has provided protective and safety
devices considered necessary according to the Risk Analysis carried out by expert personnel. People in
charge of system safety must make sure that the following essential safety regulations are observed:
Do not run the skiving device with the fixed and mobile protective devices
dismantled or disabled.
Do not run the skiving device with the fixed and mobile protective devices
dismantled or disabled.
It is forbidden to switch off safety devices installed on the skiving device or create
by-pass systems to limit switches or micro-switches.
Operations with reduced safety devices must be carried out strictly observing the
instructions in the relevant descriptions, and must be performed by specialized
technicians aware of the risk, under the direct supervision of the company person
responsible for safety. Active protective devices must be restored as soon as
possible, limiting this high risk status to the minimum.
Cleaning and maintenance operations must be performed with the electrical and
pneumatic cut-out devices switched OFF. To this end, the skiving device is
provided with emergency push-buttons which shut down the system. It is good
practice to use them as safety lock-outs to avoid accidental starting during
inspections or mechanical jobs.
Clean covers and control panel with soft, dry cloths lightly dampened in detergent;
do not use solvents as they could damage the surfaces.
Do not modify the skiving device or its parts. Otherwise, the Manufacturer shall
not hold itself responsible for damage to persons and materials. Request any
modifications/customizing directly from the Manufacturer.
OFF
Skiving device AT-306

Habasit Italiana S.p.A.
Vittorio Veneto 31029 (TV)
Tel.: ++39(0)438.9113
Fax. ++39(0)438.200545
Skiving device AT-306
Author: S.D.T. / KM REGULATIONS AND GENERAL WARNING NOTES
Edition: 02/2005 Page A-10
Replaces: 01/2001
A.7 Remaining risks
The use of the skiving device during its operation may give risk to additional risks such as the following:
The possibility of crushing occurring during bracket closing and table moving.
The user is responsible for taking care during transportation and movement of the equipment where the
use of extraneous equipment (such as forklift trucks etc.) present dangers from bumping into and
crushing persons in the area of these operations.
Ensure during equipping and maintenance operations that the stages in the chapters of the manual are
scrupulously adhered to and have these operations carried out only by suitably prepared and qualified
persons.
Skiving device AT-306

Habasit Italiana S.p.A.
Vittorio Veneto 31029 (TV)
Tel.: ++39(0)438.9113
Fax. ++39(0)438.200545
Skiving device AT-306
Author: S.D.T. / KM REGULATIONS AND GENERAL WARNING NOTES
Edition: 02/2005 Page A-11
Replaces: 01/2001
A.8 Qualification of personnel
Each task must be assigned to a person trained in the work to be carried out and trained in correct usage
as well as fully aware of any remaining risks and dangers in that work. Personnel must not carry out work
outside their area of competence, knowledge and responsibility.
TABLE 3–QUALIFICATIONS
FIRST LEVEL MACHINE CONTROL OPERATOR
Indicates non qualified personnel i.e. without specific competencies and able only to
carry out simple tasks, including in practice running the machine with the use of the
controls on the push-button panel and loading and unloading materials used during
production. Furthermore, this operator can work with the machine while the
machine's protective devices are enabled, to carry out simple, ordinary jobs for
adjusting, starting or re-starting production following enforced down-time.
MECHANICAL MAINTENANCE PERSON
A qualified technician able to run the machine under normal conditions, to intervene
on mechanical parts to make all adjustments as well as the necessary mechanical
maintenance and repair jobs, also with the protective devices disabled.
ELECTRICAL MAINTENANCE PERSON
A qualified technician able to run the machine under normal conditions, and also with
the protective devices disabled; s/he is entrusted with all electrical jobs involving
adjustment, maintenance and repairs. This operator is able to work while the interior
of the cabinets and the connector blocks are electrically live.
QUALIFIED TECHNICIAN
A person who is by training, experience, education and knowledge of accident
prevention regulations and procedures able to perceive and avoid possible dangers
and who is authorized by the plant's safety officer to carry out all necessary
mechanical and electrical intervention.
SPECIALIZED SUPERVISOR
An expert, specialized technician provided by the Manufacturer to carry out complex
operations in particular situations, installation, first start-up, instruction of the
Customer's personnel, as well as overhauls of and modifications to the machine.
Skiving device AT-306

Habasit Italiana S.p.A.
Vittorio Veneto 31029 (TV)
Tel.: ++39(0)438.9113
Fax. ++39(0)438.200545
Skiving device AT-306
Author: S.D.T. / KM REGULATIONS AND GENERAL WARNING NOTES
Edition: 02/2005 Page A-12
Replaces: 01/2001
A.9 References and standards
A.9.1 Applicable EU Directives
EU Directive N° 98/37 of 23.07.98 known as the "Machines directive”.
EU Directive N° 60/204 known as “Low tension directive”
EU Directive N° 89/336 for the convergence of Member State law on electromagnetic compatibility.
Application of the above directives is formalized through the signing of the MANUFACTURER'S
DECLARATION OF CONFORMITY drawn up once the inspection test has been carried out at the
place of installation.
This skiving device has been constructed in a country that is part of the European Community and
therefore meets the safety requirements of EU directive 98/37/CE, in force from July 23, 1998.
This conformity is certified and the skiving device bears the CE mark of compliance (see figure).
A.9.2 EU Directives concerning safety in the workplace
EU Directive N° 89/391 concerning the improvement of the safety and health of workers during work, in
addition to the following particular directives EU N° 89/654 and N° 89/655.
EU Directives N° 77/576 and N° 79/640 concerning safety signs in the workplace.
A.9.3 EU Directives concerning personal protection
EU Directive N° 89/656 and N° 89/686 concerning the use of personal protection devices.
A.9.4 EU Directives concerning environmental protection
EU Directives N° 75/442 on the disposal of waste.
EU Directives N° 78/319 on the disposal of toxic and harmful waste.
Skiving device AT-306

Habasit Italiana S.p.A.
Vittorio Veneto 31029 (TV)
Tel.: ++39(0)438.9113
Fax. ++39(0)438.200545
Skiving device AT-306
Author: S.D.T. / KM TECHNICAL SPECIFICATIONS
Edition: 02/2005 Page B-1
Replaces: 01/2001
B. TECHNICAL SPECIFICATIONS
Skiving device AT-306

Habasit Italiana S.p.A.
Vittorio Veneto 31029 (TV)
Tel.: ++39(0)438.9113
Fax. ++39(0)438.200545
Skiving device AT-306
Author: S.D.T. / KM TECHNICAL SPECIFICATIONS
Edition: 02/2005 Page B-2
Replaces: 01/2001
B.1 Purpose of the skiving device
The skiving device AT-306 has been specifically developed for joining of HABASIT power trans-mission
and conveyor belts and machine tapes using the Thermofix process.
The AT-306 is a preparing device for skiving of belts and tapes up to a width of 300 mm and a thickness
of 6 mm. The belt/tape is clamped and stuck on a steel table. This table is adjustable in tilt and is fed
under a skiving roller on precise guides. The skiving roller is driven by a powerful three phase electric
motor; feed is by means of a self-contained two speed electro-hydraulic drive. A non adjustable fast one
for in-feed and an adjustable for slow working speed. This feed gives smooth automatic and productive
operation. No operator intervention is necessary during the skiving process. The result of this operation is
a precise skiving‚ even on the most demanding belt/tape products.
The machine is operated manually: to operate it requires an operator, whose working position is in front of
the machine.
The Thermofix process includes all the flat belts and other Habasit conveyor belts with right-angled or
oblique-angled joints (for width and thickness details see: TECHNICAL SPECIFICATION).
Further details about the process can be obtained at:
For the Thermofix process (see technical manual Thermofix).
NOTE
By connecting to the company’s IT net H/Net it is possible to access current valid process data.
The skiving device AT-306 has been developed exclusively for the applications described herein. No
other or inappropriate applications are permitted.
ATTENTION
ANY USE OF THE SKIVING DEVICE OTHER THAN FOR WHICH IT WAS DESIGNED MAY BE
IMPROPER USE AND RESULT IN NOT BEING SAFE FROM THE POINTS OF VIEW OF THE
OPERATOR, MAINTENANCE WORKER AND OF THE SKIVING DEVICE ITSELF. HABASIT SHALL
NOT BE HELD LIABLE FOR THE CONSEQUENCES OF ANY BREACHES OF THESE RULES.
Skiving device AT-306

Habasit Italiana S.p.A.
Vittorio Veneto 31029 (TV)
Tel.: ++39(0)438.9113
Fax. ++39(0)438.200545
Skiving device AT-306
Author: S.D.T. / KM TECHNICAL SPECIFICATIONS
Edition: 02/2005 Page B-3
Replaces: 01/2001
ATTENTION
THE USE OF THE MACHINE IN AREAS WITH DANGER OF EXPLOSION IS FORBITTEN.
IMPORTANT
All assembly, maintenance and repair work, as well as the operation of the equipment, is expected to be
carried out be qualified personnel or staff under the supervision of responsible specialists and experts.
In case of doubt or lack of detailed information, always contact the manufacturer (see HOW THE
MANUAL IS ORGANIZED).
B.2 Identification data of the equipment
A plate fitted to the structure of the skiving device indicates the device’s identification data. These data
are shown in the following figure.
FIGURE 1–MACHINE IDENTIFICATION PLATE
Skiving device AT-306