Habitat Bamboo 948/6364 User manual

Bamboo
Issue 1 - 04/28/21
Spare Parts
www.argos-support.co.uk
[e-mail]
0370 112 1928
Customer Support
0345 640 2020

1
Safety and Care Advice
Keep children and animals
away from the work area, small
parts could choke if swallowed.
Make sure you have enough space
to layout the parts before
starting.
Care and maintenance
Product Details
Bamboo Midboy With Mirror
948/6364
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
Only clean using a damp cloth
and mild detergent. Do not use
abrasive cleaners.
Use a dry cloth to clean the
product, furniture polish is
not recommended.
•From time to time check that there
are no loose screws, nuts or bolts.
If there are please re-tighten.
This product should not be
discarded with household
waste. Take to your local
authority waste disposal
centre.
Additional Guidance
• This product has been
constructed to be used in the
domestic environment only and
not for commercial purposes.
Assemble on a soft level
surface to avoid damaging the
Assemble the item as close
room) as possible.
Sainsbury's Argos is a trading name of both: Argos Limited, Registered office: 489-499 Avebury Boulevard, Milton Keynes, United
Kingdom, MK9 2NW, registered number: 01081551 (England and Wales); and Sainsbury's Supermarkets Limited, Registered
office: 33 Holborn, London, EC1N 2HT, registered number: 03261722 (England and Wales). Both companies are subsidiaries of J
Sainsbury's plc.
We do not
recommend the
use of power
drill/drivers for
inserting screws
as this could damage the unit.
Only use hand screwdrivers.
Parts of the assembly will be
easier with 2 people.
Dispose of all packaging
carefully and responsibly.
to its final position (in the same
unit or your floor.
●Assemble all parts and bolts loosely during assembly, only once the product is complete should you
fully tighten the bolts.
●Regularly check and ensure that all bolts and fittings are tightend properly.
●This product is compliant BS4875-7 level 3 & EN14749.

Bag 1
Fittings (Shown to scale)
2
M10X12mm Nuts x4
A
Tools required
BC
D
M6X50mm Bolt x4 M6X30mm Dowel x6
M4 Allen Key x1
EF
M6X25mm Bolt x20 M6X12mm Bolt x8
G
Metal Dowel x12
HI
Locking Nut x12 M4X12mm Screw x1
J
Metal'L Bracket x1
K
20X20X3mm Felt Pad x6
Phillips screwdriver
(small & medium)
Phillips screwdriver
(small & medium)
Eye protection
(when using a
hammer or glue)
Small
hammer
Large hammer
Pencil
Mallet
Set Square
Spirit Level
Ruler/tape
measure
Power Drill
Drill Heads
L
M4X50mm Screw x1
Washer x1
M N
Anchors x1

Part
3
Left Frame
(1250 x 400 x 24mm)
1
Right Frame
(1250 x 400 x 24mm)
2
x2
Storage
(352 x 313 x 45mm)
3
Storage
(352 x 329 x 45mm)
4
Storage
(352 x 344 x 45mm)
5
Left Side Panel
(430 x 399 x 15mm)
6Right Side Panel
(430 x 399 x 15mm)
7Back Panel
(430 x 322 x 15mm)
8
Shelf Board
(382 x 322 x 15mm)
9Mirror
(398 x 398 x 16mm)
10 Support Rail
(352 x 50 x 19mm)
11 Metal Tube
(269 x 59 x 19mm)
12

4
1C
M6X30mm Dowel x3
G
Metal Dowel x6
H
Locking Nut x6
C
M6X30mm Dowel x3
G
Metal Dowel x6
H
Locking Nut x6
C
6
9
9
8
9
9
8
7
C
2
G
H
C
H
H
H
H
H
G
G
G
G
G
C
C
GG
G
GG
H
H
H
H
H
M10X12mm Nuts x4
ABC
D
M6X50mm Bolt x4 M6X30mm Dowel x6
M4 Allen Key x1
EF
M6X25mm Bolt x20 M6X12mm Bolt x8
G
Metal Dowel x12
HI
Locking Nut x12 M4X12mm Screw x1
J
Metal'L Bracket x1
K
20X20X3mm Felt Pad x6
L
M4X50mm Screw x1
Washer x1
M N
Anchors x1

5
3M10X12mm Nuts x2
AB
M6X50mm Bolt x2
E
M6X25mm Bolt x10
A
B
2
11
3
4
5
7E
E
E
E
E
B
A
D
E

6
4
5
M10X12mm Nuts x2
AB
M6X50mm Bolt x2
E
M6X25mm Bolt x10
A
B
11
1
3
4
5
6
F
M6X12mm Bolt x4
12 10
Turn
Product
K
20X20X3mm Felt Pad x4
K
K
K
E
E
E
E
E
E
E
B
A
F
F
F
F
D
E
D
F
F
F
F

7
6F
M6X12mm Bolt x4
F
Rotate
Product
D
11
12
F
FF
F
F
FF
I
M4X12mm Screw x1
J
Metal'L Bracket x1
JI
3
JI

8
7
WARNING: To prevent
possible overbalancing this unit
must be secured to a wall using
the overbalance protector kit
supplied.
A unit that is allowed to topple
can cause serious or fatal injury.
In addition to wall fixing the unit,
place heavy items on the lower
shelves, do not put any heavy
objects on top of the unit and
never allow children to climb or
hang on drawers, doors or
shelves.
·
·
L
M
N
J
L
M4X50mm Screw x1
M
Washer x1
Anchors x1
N
K
20X20X3mm Felt Pad x2
MAX
5kg
MAX
5kg
MAX
5kg
MAX
5kg
MAX
5kg

A Guide to - Wall Mounting & Fixings
Important note:
Types of walls
Care &
Maintenance
No.1 “General Purpose” wall plug
No.6 “Shield Anchor” wall plug
Heavy loads
No.3 “Cavity Fixing” wall plug
No.4 “Cavity Fixing-Heavy Duty”
wall plug
No.5 “Hammer Fixing” wall plug
No.2 “Plasterboard” wall plug
Generally aerated blocks should not
be used to support heavy loads, use
a specialist tting in this case. For light
loads, general purpose wall plugs can
be used.
For use with heavier loads such as TV
& HiFi speakers and satelite dishes etc.
For use with plasterboard partitions or
hollow wooden doors.
For use when tting or supporting
heavy loads such as shelving, wall
cabinets and coat racks.
For use with walls stuck with
plasterboard. The hammer xing allows
it to be xed to the wall rather than the
plasterboard. Always check the xing
is secure to the retaining wall.
For use when attaching light loads on
to plasterboard partitions.
Safety: Always check the fitting
and location to ensure your safety
in and around the home.
Fitting: From time to time check
the fitting to ensure the wall plugs
or screws do not become loose.
You can use one of the following types of wall plug if your walls are made
of brick, breeze block, concrete, stone or wood.
Important: When drilling into walls always
check that there are no hidden wires or pipes etc.
Hints:
1: General rule: Always use a larger screw and wall plug
if you are not sure.
2: Ensure you use the recommended drill bit to match the wall
plug and hole size.
3: Ensure you drill the hole horizontally, do not force the drill or
enlarge the hole.
4: Take extra care when drilling high walls, ceilings and ceramic
tiles. Ensure wall plugs are inserted beyond the thickness of
the ceramic tiles to avoid the tiles splitting or cracking.
5: Ensure wall plugs are well tted and are a tight t in the
drilled hole.
If plastic wall plugs
are supplied with your
product:
Make sure that the screws and wall plugs being used
are suitable for supporting your unit. Consult a qualified
tradesperson if you are unsure.
- these are only suitable for
use in masonry walls.
If you are in any doubt about
the correct wall plugs for
your wall, seek professional
advice.
Failure of the product due to
using incorrect xings is the
responsibility of the installer.