Habitat Set of 2 Book Shelves 331/6636 User manual

Set of 2 Book Shelves
Dimensions
Width - 60 cm
Depth - 8 cm
Height - 10 cm
Important – Please read these instructions fully before starting assembly
Assembly Instructions - please keep for future reference
Issue 1 - 05/09/14
Customer Helpline: 0121 776 5720
If you need help or have damaged or missing parts, call the
LP. 211.96.079 LP.211.95.079A
331/6636
333/8449

Safety and Care Advice
Important – Please read these instructions fully before starting assembly
Care and maintenance
2
Check you have all the
components and tools listed on
pages 3 and 4.
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
• Do not stand or put weight on
the product, this could cause
damage.
• Assemble the item as close
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
• Parts of the assembly will be
easier with 2 people.
• We do not
recommend the
use of power
drill/drivers for
inserting screws ,
as this could damage the unit.
Only use hand screwdrivers.
• Dispose of all packaging
carefully and responsibly.
• Only clean using a damp
cloth and mild detergent, do
no use bleach or abrasive
cleaners.
• From time to time check that
there are no loose screws on
this unit.
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal
centre.

Components - Panels
Please check you have all the panels listed below
3
Shelf x 2
Components - Fittings If you have damaged or missing components,
call the Customer Helpline:
0121 776 5720
Note:
may be supplied than are required.
Ruler – Use this ruler to help correctly identify the screws and parts
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 110 115 120 125 130 135 140 145 150 155 160 165 170
105
A B D
Wall Plug x 4 Wall screw x 4
Tools required
Drill
(for wall drilling only)
Phillips screwdriver
(medium & large)

Assembly Instructions
Step 1
2. Once 2 x holes have
been drilled insert 2 x
wall plugs into the
wall.
2. Holding the shelf in
position over the
wallplugs, screw in 2 x
wallscrews through
the shelf and into the 2
wall plugs using a phillips
screwdriver
3. Please repeat the
above with the remaining
Shelf
1. To mount the Shelf to
the wall 2 x holes will
need to be drilled.
Note: Please refer to the
wall mounting guide at
the back of this
instruction for further
details.
Mark the wall in the
desired position with a
suitable scribe, Please
use a spirit level to
ensure that your marks
are level before any
holes are drilled.
Assembly Complete
AA
B
B
A
B