Habitat Kirk 3125157 User manual

Kirk
Wardrobe
Issue 1 - 10/05/22
Spare Parts
www.argos-support.co.uk
[e-mail]
0370 112 1928
Customer Support
0345 640 2020

1
Safety and Care Advice
Product Details
Keep children and animals
away from the work area, small
parts could choke if swallowed.
Make sure you have enough space
to layout the parts before
starting.
Care and maintenance
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
Only clean using a damp cloth
and mild detergent. Do not use
abrasive cleaners.
Use a dry cloth to clean the
product, furniture polish is
not recommended.
From time to time check that there
are no loose screws, nuts or bolts.
If there are please re-tighten.
This product should not be
discarded with household
waste. Take to your local
authority waste disposal
centre.
Additional Guidance
Assemble all parts and bolts loosely during assembly, only once the product is complete should you
fully tighten the bolts.
Regularly check and ensure that all bolts and fittings are tightend properly.
Maximum loading weight 60kg.
This product is compliant EN14749,BS4875-7.
Any additional or replacement parts are obtained from the manufacturer.
This product has been
constructed to be used in the
domestic environment only and
not for commercial purposes.
Assemble on a soft level
surface to avoid damaging the
unit or your floor.
Assemble the item as close
to its final position (in the same
room) as possible.
We do not
recommend the
use of power
drill/drivers for
inserting screws
as this could damage the unit.
Only use hand screwdrivers.
Parts of the assembly will be
easier with 2 people.
Dispose of all packaging
carefully and responsibly.
Kirk Wardrobe 3125157 Walnut
Argos Limited, 489-499 Avebury Boulevard, Milton Keynes, MK9 2NW. Argos (N.I.) Ltd, Forestside Shopping Centre, Upper Galwally, Belfast,
United Kingdom, BT8 6FX. Argos Distributors (Ireland) Limited, Unit 7, Ashbourne Retail Park, Ballybin Road, Ashbourne, County Meath, Ireland.
Kirk Wardrobe 4013756 Oak

Bag 1
Fittings (Shown to scale)
2
AB
32mm Metal Dowel x24 Locking Nut x24
G
30mm Wooden Dowel x16
H
35mm Screw x4
D
16mm Screw x52
E
16mm Screw x2
F
Wall Connector x2
I
J
Plastic Cleat x12
C
30mm Screw x6
20mm Handle x4
K
Hinge x6
LM
Wooden Stopper x1
Clothes Rail Bracket x2
NO
20mm Bolt x4 Allen Key x1
P
Silicone Pad x4
Q
Ø15mm Foot Pad x 4

3
Tools required
Phillips screwdriver
(small & medium)
Phillips screwdriver
(small & medium)
Large hammer
Pencil
Ruler/tape
measure
Power Drill
Drill Heads
Ladder

Panels
4
Top Panel x1
(800 x 500mm)
1
3
Left Side Panel x1
(1669 x 480mm)
2
Bottom Panel x1
(800 x 500mm)
4
Back Panel x1
(1680 x 772mm)
6
(450 x 150mm)
11
14
Drawer Front x1
(798 x 187mm)
10
Drawer Left Side x1
Drawer Back x1
(712 x 150mm)
13
Drawer Base Rail x1
(432 x 50mm)
Right Side Panel x1
(1669 x 480mm)
Shelf Panel x1
(762 x 464mm)
5
Clothes Rail x1
(760 x 35mm)
7
(450 x 150mm)
12 Drawer Right Side x1
Left Door x1
(1472 x 397mm)
8
Right Door x1
(1472 x 397mm)
9
Drawer Bottom Panel x1
(722 x 443mm)
15

1
5
A
32mm Metal Dowel x12
2
3
30mm Wooden Dowel x16
C
A
C
5
13
10
14
11
12
AB
32mm Metal Dowel x24 Locking Nut x24
G
30mm Wooden Dowel x16
H
35mm Screw x4
D
16mm Screw x52
E
16mm Screw x2
F
Wall Connector x2
I
J
Plastic Cleat x12
C
30mm Screw x6
20mm Handle x4
K
Hinge x6
LM
Wooden Stopper x1
Clothes Rail Bracket x2
NO
20mm Bolt x4 Allen Key x1
P
Silicone Pad x4
Q
Ø15mm Foot Pad x 4

2
6
16mm Screw x24
FK
Hinge x6
L
Clothes Rail Bracket x2
NO
20mm Bolt x4 Allen Key x1
3
2
O
N
N
L
K
K-2
K-1
K-2
FF
F
F

3
4
7
1
M
Wooden Stopper x1
E
30mm Screw x2
H
Wall Connector x2
G
16mm Screw x2
A
32mm Metal Dowel x6
A
1
Rotate
Product E
E
M
H
G
A
32mm Metal Dowel x6
A
4
Q
Ø15mm Foot Pad x 4
4
Peel off
the back
1
Q
2
QQx4

5
6
8
2
Locking Nut x 6
B
B B
Locking Nut x 6
B
3
5
B B
4

7
8
9
6
Locking Nut x 6
B
1
B B

9
10
10
7
K-1
Hinge x6
16mm Screw x12
F
FF
K-1
8
9
P
Silicone Pad x4
Px4
1
2
P
P

11
11
Please Note!
Adjusting Push-To-Open Door Mechanism
If door does not open when pushed in
it could be because the push-to-open
mechanism needs adjustment. Simply
turn the magnetic end of the mechanism
to screw it out further so that it makes
better contact with the metal strike plate.
8
9

12
12
8
9
E
30mm Screw x2
I
20mm Handle x2
EI
13 Locking Nut x 5
B
15
12
14
11
10
B B

14
13
E
30mm Screw x2
I
20mm Handle x2
35mm Screw x4
D
15
Locking Nut x1
B
B B
13
E
I
D
D

14
16
17 16mm Screw x 16
FJ
Plastic Cleat x 12
J
F
F

18
15
WARNING!
In order to prevent overturning this product must be used with the wall attachment device provided.
Serious or fatal crushing injuries can occur from furniture tipping over. To help prevent topple over :-
-Use the wall attachment devices provided
-Never allow children to climb or hang on drawers
-Do not overload the drawer beyond maximum recommended loading.
-Place heaviest items in the lower drawers or shelves.
-Unless specifically designed to accommodate, do not set TV's or other heavy objects on top of this product
- Never open more than one drawer at a time
An attachment device is provided with your product, however you will need to source suitable fixings for your wall type.
Always ensure that the wall to be drilled into is free from hidden electrical wires, water and gas pipes.
If in doubt consult a qualified trades person.

16
Assembly is complete.
19

Important note:
Types of walls
Care &
Maintenance
No.1 “General Purpose” wall plug
No.6 “Shield Anchor” wall plug Heavy
loads
No.3 “Cavity Fixing” wall plug
No.4 “Cavity Fixing-Heavy Duty” wall
plug
No.5 “Hammer Fixing” wall plug
No.2 “Plasterboard” wall plug
Generally aerated blocks should not
be used to support heavy loads, use
a specialist fitting in this case. For light
loads, general purpose wall plugs can be
used.
For use with heavier loads such as TV &
HiFi speakers and satelite dishes etc.
For use with plasterboard partitions or
hollow wooden doors.
For use when fitting or supporting heavy
loads such as shelving, wall cabinets and
coat racks.
For use with walls stuck with plasterboard.
The hammer fixing allows it to be fixed
to the wall rather than the plasterboard.
Always check the fixing is secure to the
retaining wall.
For use when attaching light loads on to
plasterboard partitions.
Safety: Always check the fitting and
location to ensure your safety in and
around the home.
Fitting: From time to time check
the fitting to ensure the wall plugs
or screws do not become loose.
You can use one of the following types of wall plug if your walls are made
of brick, breeze block, concrete, stone or wood.
Important: When drilling into walls always
check that there are no hidden wires or pipes etc.
Hints:
1: General rule: Always use a larger screw and wall plug
if you are not sure.
2: Ensure you use the recommended drill bit to match the wall
plug and hole size.
3: Ensure you drill the hole horizontally, do not force the drill or
enlarge the hole.
4: Take extra care when drilling high walls, ceilings and ceramic tiles.
Ensure wall plugs are inserted beyond the thickness of the ceramic
tiles to avoid the tiles splitting or cracking.
5: Ensure wall plugs are well fitted and are a tight fit in the
drilled hole.
Wall Fixings: Make sure that the screws and wall plugs being used are suitable
for supporting your unit. Consult a qualified tradesperson if you are
unsure.
- because of the variety of
different wall types, Habitat
cannot provide you with the
exact fixings you will need to
fix this product to the wall.
You must first identify the
type of wall you intend to fix
product onto and then contact
your local hardware store to
get the appropriate fixings.
A Guide to - Wall Mounting & Fixings