Habitat Suki User manual

Issue 1 - 11/09/20
Spare Parts
www.argos-support.co.uk
[e-mail]
0370 112 1928
Customer Support
0345 640 2020
Suki

1
Safety and Care Advice
Product Details
Suki Corner TV Unit 940/7879, 609/7426, 392/4970
Keep children and animals
away from the work area, small
parts could choke if swallowed.
Make sure you have enough space
to layout the parts before
starting.
Care and maintenance
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
Only clean using a damp cloth
and mild detergent. Do not use
abrasive cleaners.
Use a dry cloth to clean the
product, furniture polish is
not recommended.
•From time to time check that there
are no loose screws, nuts or bolts.
If there are please re-tighten.
This product should not be
discarded with household
waste. Take to your local
authority waste disposal
centre.
Additional Guidance
●Assemble all parts and bolts loosely during assembly, only once the product is complete should you
fully tighten the bolts.
●Regularly check and ensure that all bolts and fittings are tighten properly.
●This product is compliant BS4875-7 level 3
•This product has been
constructed to be used in the
domestic environment only and
not for commercial purposes.
Assemble on a soft level
surface to avoid damaging the
Assemble the item as close
room) as possible.
Sainsbury's Argos is a trading name of both: Argos Limited, Registered office: 489-499 Avebury Boulevard, Milton Keynes, United
Kingdom, MK9 2NW, registered number: 01081551 (England and Wales); and Sainsbury's Supermarkets Limited, Registered
office: 33 Holborn, London, EC1N 2HT, registered number: 03261722 (England and Wales). Both companies are subsidiaries of J
We do not
recommend the
use of power
drill/drivers for
inserting screws
as this could damage the unit.
Only use hand screwdrivers.
Parts of the assembly will be
easier with 2 people.
Dispose of all packaging
carefully and responsibly.
WARNING
In order to prevent overturning this product must be used with the wall attachment device provided.

Fittings (Shown to scale)
2
Bag 1
E
1.2 x 20mm Nail x 6
D
7 x 39mm Locking Pin x 6
F
C
Foot x 4
B
A
6 x 30mm Dowel x 8 5 x 50mm Screw x 18
15 x 12mm Locking Nut x 6

Phillips screwdriver
(small & medium)
Phillips screwdriver
(small & medium) Eye protection
(when using a
hammer or glue)
Small
hammer
Large hammer
Pencil
Mallet
Set Square
Spirit Level
Ruler/tape
measure
Power Drill
Drill Heads
3
Tools required

Panels
4
x2
x2
1Top (916 x 368mm)
7Right Shelf
(177 x 145mm)
9Middle Shelf (496 x 366mm)
8Left Shelf
(177 x 145mm)
2Bottom (916 x 368mm)
3Middle Right
(367 x 386mm)
4Middle Left
(367 x 386mm)
6Left Side
(147 x 386 mm)
5Right Side
(147 x 386mm)
10 Back (192 x 386mm)

5
1
2
3
4
A
A
A
A
A
A
A
A
7
8
E
1.2 x 20mm Nail x 6
D
7 x 39mm Locking Pin x 6
F
15 x 12mm Locking Nut x 6
C
Foot x 4
B
A
6 x 30mm Dowel x 8 5 x 50mm Screw x 18
A
6 x 30mm Dowel x 46 x 30mm Dowel x 4
A
6 x 30mm Dowel x 46 x 30mm Dowel x 4

6
B
3
4
B
5 x 50mm Screw x 15 x 50mm Screw x 1
B
5 x 50mm Screw x 15 x 50mm Screw x 1
4
8
B
B
7
3
Unfinished edge
Unfinished edge

7
5
6
B
5 x 50mm Screw x 45 x 50mm Screw x 4
B
5 x 50mm Screw x 45 x 50mm Screw x 4
4
3
9
9
9
9
B
B
B
B
B
B
B
B

8
7
8
8
6
5
Unfinished edge
Unfinished edge

9
10
9B
5 x 50mm Screw x 85 x 50mm Screw x 8
C
Foot x 4Foot x 4
6
4
3
2
10
10
3
4
6
5
B
BC
CC
C
B
BB
BB
B
Unfinished surface
Unfinished surface
Unfinished surface