Haier AC282AFEAA User manual

Operation & Installation
Manual
No. 0010577967
B
Please read this operation manual before using the air conditioner.
Please keep this manual carefull and safel .
CONVERTIBLE TYPE AIR CONDITIONER
AC282AFEAA
AC362AFEAA
AC482AFEAA
AC602AFEAA
AC282AFERA
AC362AFERA
AC482AFERA
AC602AFERA
All manuals and user guides at all-guides.com
all-guides.com

Contents
Cautions ...........................................................................
Safet Precautions ...........................................................
Features and Functions ...................................................
Name of Parts .....................................................................
Cleaning and Care ..............................................................
Operation Tips.................................................................
Installation of Indoor Unit ...........................................
Trouble Shooting.............. ...........................................
1-2
3-4
5-7
8
9
10
11-24
25-28
All manuals and user guides at all-guides.com

Cautions
For the purpose of safet , the air
conditioner must be properl grounded in
accordance with specifications.
Alwa s remember to unplug the air
conditioner before opening inlet grill.
Alwa s grip plug firml and pull straight
out from the outlet.
Disposal of the old air conditioner
Before disposing an old air conditioner that
goes out of use, please make sure it's
inoperative and safe. Unplug the air
conditioner in order to avoid the risk of
child entrapment.
It must be noticed that air conditioner
s stem contains refrigerants, which require
specialized waste disposal. The valuable
materials contained in a air conditioner can
be rec cled. Contact our local waste
disposal center for proper disposal of an
old air conditioner and contact our local
authorit or our dealer if ou have an
question. Please ensure that the pipework
of our air conditioner does not get
damaged prior to being picked up b the
relevant waste disposal center, and
contribute to environmental awareness b
insisting on an appropriate, anti-pollution
method of disposal.
Disposal of the packaging of your new
air conditioner
All the packaging materials emplo ed in
the package of our new air conditioner
ma be disposed without an danger to the
environment.
The cardboard box ma be broken or cut
into smaller pieces and given to a waste
paper disposal service. The wrapping bag
made of pol eth lene and the pol eth lene
foam pads contain no fluorochloric
h drocarbon.
All these valuable materials ma be taken to a
waste collecting center and used again after
adequate rec cling.
Consult our local authorities for the name and
address of the waste materials collecting centers
and waste paper disposal services nearest to
our house.
Safety Instructions and Warnings
Before starting the air conditioner, read the
information given in the User's Guide
carefull . The User's Guide contains ver
important observations relating to the
assembl , operation and maintenance of the
air conditioner.
The manufacturer does not accept
responsibilit for an damages that ma arise
due to non-observation of the following
instruction.
Damaged air conditioners are not to be put
into operation. In case of doubt, consult our
supplier.
Use of the air conditioner is to be carried
out in strict compliance with the relative
instructions set forth in the User's Guide.
Installation shall be done b professional
people, don't install unit b ourself.
1
All manuals and user guides at all-guides.com

2
Cautions
If the air conditioner is used under higher
temperature condition than those listed,
the built-in protection circuit ma operate
to prevent internal circuit damage. Also,
during Cooling and Dr modes, if the unit
is used under conditions of lower
temperature than those listed above, the
heat-exchanger ma freeze, leading to
water leakage and other damage.
Do not use this unit for an other purposes
except for the Cooling and the Heating,
Dehumidif ing, and air-circulation of
rooms should be in ordinar dwellings.
The wiring method should be in line with
the local wiring standand.
The waste batter should be disposed
properl .
If the fuse on PC board is broken, please
change it with the t pe T 3.15A/250VAC.
The air breaker should be all-pole switch.
and the distance between it's two contacts
should no less than 3mm.
Cooling
Heating
Indoor
outdoor
Rated Maximum Minimum
27 32 18
19 23 14
35 43 -5
24 26 --
20 27 15
14.5 -- --
7 24 -15
6 18 --
DB C
WB C
DB C
WB C
Indoor
outdoor DB C
WB C
DB C
WB C
*ERA :
Cooling
Heating
Indoor
outdoor
Rated Maximum Minimum
27 32 18
19 23 14
35 43 10
24 26 --
20 27 15
14.5 -- --
7 24 -7
6 18 --
DB C
WB C
DB C
WB C
Indoor
outdoor DB C
WB C
DB C
WB C
*EAA :
All electrical repairs must be carried out
b qualified electricians. Inadequate repairs
ma result in a major source of danger for
the user of the air conditoiner.
Do not damage an parts of the air
conditioner that carr refrigerant b
piercing or perforating the air conditioner's
tubes with sharp or pointed items, crushing
or twisting an tubes, or scraping the
coatings off the surfaces. If the refrigerant
spurts out and gets into e es, it ma result
in serious e e injuries.
Do not obstruct or cover the ventilation
grille of the air conditioner. Do not put
fingers or an other things into the
inlet/outlet and swing louver.
Do not allow children to pla with the air
conditioner. In no case should children be
allowed to sit on the outdoor unit.
Temperature and Humidity Range
For this model, the all-pole discon-rexion
connection method should be applied in
the power suppl .
Such means for disconnection must be
incorporation in the fixed wiring.
Specifications
The refrigerating circuit is leak-proof.
When the indoor unit is turned on,the
PCB will test if swing motor is O.K.,and
then fan motor will start up.So there is a
few seconds to wait .
In cooling mode,the flaps will swing
automaticall to a fixed position for anti-
condensating.
All manuals and user guides at all-guides.com

3
Safet Precautions
WARNING!
DANGER!
Do not attempt to install this air conditioner b ourself.
This unit contains no user-serviceable parts. Alwa s consult authorized service personnel
for repairs.
When moving, consult authorized service personnel for disconnection and installation of
the unit.
Do not become excessivel chilled b sta ing for length periods in the direct cooling
airflow.
Do not insert fingers or objects into the outlet port or intake grills.
Do not start and stop air conditioner operation b connecting and disconnecting the
power suppl cord and so on.
Take care not to damage the power suppl cord. If the suppl card is damaged, it must be
replaced b the manufacturer or authoried service agent in order to avoid a hazard.
In the event of a malfunction (burning smell, etc.), stop operation immediatel , turn off
the circuit breaker, and consult authorized service personnel.
The breaker of the air conditioner should be all-pole switch; and the distance between its
two contacts should be no less 3 mm. Such means for disconnection must be
incorporation in the fixed wiring.
Use copper wire onl . All the cables shall have got the European authentication certificate.
The power suppl connects from the outdoor side. The connecting cable and the power
cable are self-provided.
The parameter of connecting cable: H05RN-F 4G 0.75mm2 .
The paramter of Indoor and Outdoor unit:T3.15A/250VAC.If the fuse on PC board is
broken, please change with the t pe.
All manuals and user guides at all-guides.com

4
Safet Precautions
WARNING!
Provide occasional ventilation during use.
Do not direct air flow at fire places or heating apparatuses.
Do not climb on and place objects on the air conditioner.
Do not hang objects from the indoor unit.
Do not set flower vases or water containers on top of the air conditioner.
Do not expose the air conditioner directl to water.
Do not operate the air conditioner with wet hands.
Do not pull power suppl cord.
Turn off power source when not using the unit for extended periods.
Check the condition of the installation stand for damage.
Do not place animals or plants in the direct path of the air flow.
Do not drink the water drained from the air conditioner.
Do not use in applications involving the storage of foods, plants or animals, precision
equipment, or art works.
Do not appl an heav pressure to radiator fins.
Operate onl with air filters installed.
Do not block or cover the intake grill and outlet port.
Ensure that an electronic equipment is at least one metre awa from either the indoor
or outdoor unit.
Avoid installing the air conditioner near a fireplace or other heating apparatuses.
When installing the indoor and outdoor unit, take precautions to prevent access to infants.
Do not use inflammable gases near the air conditioner.
All manuals and user guides at all-guides.com
all-guides.com

5
Features and Functions
AUTOMATIC OPERATION
SLEEP
HEAT & COOL TYPE
Merel press the ON/OFF button, and the unit will begin automatic operation in an of the
Heating, Cooling and Blow modes as appropriate, in accordance with the thermostat setting and
the actual temperature of the room.
COOLING TYPE
When the SLEEP button is pressed during Cooling or Dr mode, the thermostat setting
graduall rises during the period of operation. When the set time is reached, the unit
automaticall turns off.
HEAT & COOL TYPE
When the SLEEP button is pressed during Heating mode, the air conditioner's thermostat
setting graduall lowers during the period of operation; When the set time is reached, the
unit automaticall turns off.
WIRELESS REMOTE CONTROL UNIT
The WIRELESS REMOTE CONTROL UNIT allows convenient control of air conditioner
operation.For this t pe unit, the wireless remote controllor t pe is YR-H50.
MILDEW-RESISTANT FILTER
The AIR FILTER has been treated to resist mildew growth, thus allowing cleaner use and
easier care.
COOLING TYPE
Merel press the ON/OFF button, and the unit will begin automatic operation in the Cooling
or dr modes as appropriate, in accordance with the thermostat setting and the actual temperature
of the room.
All manuals and user guides at all-guides.com

6
Features and Functions
VERTICAL AIR DIRECTION ADJUSTMENT
Use the air direction adjustment within the ranges shown above.
HORIZONTAL AIR DIRECTION ADJUSTMENT
Each time the button is pressed, the air direction range will change as follows:
Press the AIR FLOW DIRECTION VERTICAL SET button.
The vertical airflow direction is set automaticall as shown, in accordance with the t pe of
operation selected.
Press the AIR FLOW DIRECTION HORIZONTAL SET button.
12 3 45
54 3 21
Cool/Dehumidification/Fan:
Heat:
1
2
3
4
5
123
4
5
Use the air direction adjustments within the ranges shown above.
All manuals and user guides at all-guides.com

Each time the button is pressed, the air direction range will change as follows:
Features and Functions
7
The swing range of up-down flap is as follow :
air direction louvers
RIGHT/LEFT
12 3 45
32124 154 5
1
2
3
4
5
Air flow direction set Range of swing
1
2
3
4
5
1
1
2
3
1
to
3
to
3
to
4
to
5
to
5
(all range)
Note :
When being switched on firstl , the up-down flap will be at the position of max.angle.
In cooling, the up-down louver is not good to sta at position 4, 5 for along time,
otherwise, the dew will occur.
All manuals and user guides at all-guides.com

Name of Parts
8
1 Operating Control Panel
2 Emergenc switch
3 Power Indicator Lamp
4 OPERATION Indicator Lamp
5 TIMER Indicator Lamp
6 Compressor Lamp
7 Remote receiver
8 Inlet Grill ( Filter inside )
9 Front panel
45 6
1
POWER OPER TIMER
EMER
2
COMP
3
for series 282, 362, 482, 602
8
91
7
Note : For the wired control t pe unit, the unit state should be checked b the the wired
controller, instead of the remote receiver; and if ou set the TIMER function, the
TIMER LED on the remote receiver will not be on.
All manuals and user guides at all-guides.com

9
The following four procedures are for series 282, 362, 482, 602.
1. Pull the filters upward to remove them from the Intake Grill.
2. Clean the air filter: Remove the dust from the filters b vacuum cleaner or washing them.
After washing, allow the air filters to dr thoroughl in an area protected from sunlight.
3. Re-attach the air filters to the Intake Grill, press the two buttons on the filters, until ou hear
a sound of click.
When used for extended periods, the unit ma accumulate dirt inside, which reduces its
performance. We recommend that the unit is inspected regularl , in addition to our own
cleaning and care. For more information, consult authorized service personnel.
When cleaning the unit's bod , do not use water hotter than 40 C, harsh abrasive
cleansers, or volatile agents like benzene or thinner.
Do not expose the unit bod to liquid insecticides or hairspra s.
When shutting down the unit for one month or more, first allow the Fan mode to operate
continuousl for about half a da to allow internal parts to dr thoroughl .
Cleaning and Care
o
‡ 422£‹522
070531
All manuals and user guides at all-guides.com
all-guides.com

10
Operation Tips
Operation and Performance
*Heating Performance
*Microcomputer-controlled Automatic Defrosting
Heat-pump air conditioners heat our entire
room b recirculating air throughout the room,
with the result that some time ma be required
after first starting the air conditioner until the
room is heated.
This air conditioner operates on the heat-pump
principle, absorbing heat from outdoor air and
transferring that heat indoors. As a result, the
operating performance is reduced as outdoor air
temperature drops. If ou feel that insufficient
heating perfomance is being produced, we
recommend ou use this air conditioner in
conjunction with another kind of heating
appliance.
Instructions relating to heating (*) are applicable
onl to "HEAT & COOL TYPE".
When using the Heating mode under
conditions of low outdoor air temperature high
humidit , frost ma form on the outdoor unit,
resulting in reduced operating performance.
In order to prevent this kind of reduced
performance, this unit is equipped with a
Microcomputer-controlled Automatic
Defrosting function. If frost forms, the air
conditioner will temporaril stop, and the
defrosting circuit will operate briefl (for
about 7 to 15 minutes).
Accessories for installation
The following parts mentioned in this manual
are the installation parts .
Mark Parts name
Adhesive tape
Saddle (L.S) with screws
Drain hose
Heat insulation material
Piping hole cover
Putt
Plastic clamp
Optional parts
A
B
C
D
E
F
G
All manuals and user guides at all-guides.com

11
WARNING !
CAUTION !
Please ask the dealer or specialist to install, never tr b the users themselves. After the installation please
be sure of the following conditions.
Incorrect installation ma cause water leaking, shock and fire hazard.
Please call dealer to install the air-conditioner.
Air-conditioner can't be installed in the envi-
ronment with inflammable gases because the
inflammable gases near to air-conditioner ma
cause fire hazard.
Installed electrical-leaking circuit breaker.
Connect earthing wire.
Use discharge pipe correctl to ensure efficient
discharge.
[Location]
[Wiring]
[Operating noise]
It easil cause electrical shock without circuit
breaker.
Air-conditioner should be located in well-vented
and easil -accessible place.
Air-conditioner should not be located in the
following places:
(a) Places with machine oils or other oil vapours.
(b) Seaside with high salt content in the air.
(c) Near to hot spring with high content of sulfide
gases.
(d) Area with frequent fluctuation of voltage e.g.
factor , etc.
(e) In vehicles or ships.
(f) Kitchen with heav oil vapour or humidit .
(g) Near to the machine emitting electric-magnetic
waves.
(h) Places with acid, alkali vapuor.
TV, radio, acoustic appliances, etc. are at least 1
m far awa to the indoor unit, outdoor unit, power
Earthing wire should not be con-
nected to the gas pipe, water pipe,
lightning rod or phone line, in-
correct earthing ma cause shock.
Incorrect pipe use ma cause water leaking.
suppl wire, connecting wire, pipes, otherwise
images ma be disturbed or noises be created.
As required, take measures against heav snow.
Air-conditioner should be equipped with special
power suppl wire.
Choose the following locations:
(a) Capable of supporting air-conditioner weight,
don't increase operating noise and vibration.
(b) Hot vapour from outdoor unit outlet and ope-
rating noise don't disturb neighbour.
No obstacles around the outdoor unit outlet.
Earthing
Installation of Indoor Unit
All manuals and user guides at all-guides.com

1. SELECTING THE MOUNTING POSITION
For authorized service personnel onl
WARNING
WARNING
CAUTION
Installation of Indoor Unit
12
Be careful not to scratch the room air conditioner when handing it.
After installation, explain correct operation to the customer, according to the operating
manual.
Let the customer keep this installation manual because it will be used when the room
air conditioner is serviced or moved.
(1) For the room air conditioner to operate satisfactoril , install it as outlined in this
installation manual.
(2) Connect the indoor unit and outdoor unit with the room air conditioner piping and
cords available from our standard parts. This installation manual describes for the
correct connections so that the installation set available from our standard parts should
be used.
(3) Installation work must be performed in accordance with national wiring standards
b authorized personnel onl .
(4) Never cut the power cord, lengthen or shorten the cord, or change the plug.
(5) Also, do not use an extension cord.
(6) Plug in the power cord plug firml . If the receptacle is loose, repair it before using
the room air conditioner.
(7) Do not turn on the power until all installation work is done.
Do not install the unit where there is the danger of combustible gas leakage.
Do not install near heat sources.
If children under 10 ears old ma approach the unit, take preventive measures so
that the cannot reach the unit.
Install at a place that can withstand the weight of the indoor unit and install it
positivel so that the unit will not topple or fall.
All manuals and user guides at all-guides.com

FOR HALF CONCEALED INSTALLATION
(1) Install the indoor unit level on a strong wall which is not subject to vibration.
Installation of Indoor Unit
13
(2) The inlet and outlet ports should not be obstructed : the air should be able to blow all
over the room.
(3) Do not install the unit where it will be exposed to direct sunlight ,
(6) Take servicing , etc.into consideration and leave the spaces shown in (Fig.1 or 2) .
Also install the unit where the filter can be removed .
(4) Install the unit where connection to the outdoor unit is eas .
(5) Install the unit where the drain pipe can be easil installed.
Ceiling
INDOOR UNIT
3"(80mm)
over
6"(150mm)
over
0.4"(10mm)
over
Ceiling panel
INDOOR UNIT
3"(80mm)
over
6"(150mm)
over
0.4"(10mm)
over
Ceiling panel
Fig. 1
Fig. 2
All manuals and user guides at all-guides.com

INSTALLATION PROCEDURE
Install the room air conditioner as follows:
CONNECTION PIPE REQUIREMENT
Table 1
Model
Diameter
Liquid side Gas side
Maximum
length
Maximum height
(between indoor
and outdoor)
9.52 mm 19.05mm 50 m 30 m
14
Installation of Indoor Unit
1. REMOVE THE INTAKE GRILL AND SIDE COVER
(1) Remove the Air filters
2. LOCATION OF CEILING SUSPENSION BOLTS
For half-concealed installation
Supension-bolt pitch should be as shown in Fig.4.
Ceiling Opening:1530mm
40mm 40mm
Ceiling panel
Suspension bolt should
extend outward 30 to 50mm.
Ceiling Opening:640mm
Ceiling panel
15mm
(2) Remove the intake grilles
(3) Remove the Side cover A (Right and left side)
(4) This air conditioner can be set up to intake
fresh air . For information about how to install for
fresh-air intake, refer to page 22 "FRESH-AIR INTAKE".
Suspension bolt should
extend outward 30 to 50mm.
Suspension bolt pitch 1530mm
30mm 30mm
INDOOR UNIT (TOP VIEW)
Dimensions
(Space Required for
installation)
10mm
155mm
300mm
Fig. 3
Fig. 4
Side cover A (Right side) Side cover A (Left side)
Intake grille
Air filter
9.52 mm 15.88mm 30 m 20 m
For series 362£¤EAA),482,
602
For series 282, 362(ERA)
All manuals and user guides at all-guides.com
all-guides.com

15
Installation of Indoor Unit
3. DRILLING THE HOLES AND ATTACHING THE SUAPENSION BOLTS
IF USING ANCHOR BOLTS
(1) Drill holes for anchor bolts at the locations at which ou will set the suspension bolts.
Note that anchor bolts (to be obtained locall ).
(2) Install the anchor bolts ,then temporaril attach special nut "B" (included) and a
locall -procurde M10 nut to each of the bolts. (See Fig.6.)
M10 Nut
(Obtaied locally)
INSTALLING THE INDOOR UNIT
(1) Lift unit so that suspension bolts pass through suspension fittings at the sides (four
places),and slide the unit back.(See Fig.8.)
(1) Drill 25mm holes at the suspension-bolt locations.
(The two special nuts are provided with the unit. The M10 nut must be obtained locall .)
Refer to Fig.5.
(2) Install the bolts, then temporaril attach Special nuts A and B and a normal M10 nut
to each bolt.
ƒ¡¡
Ceiling panel
10 to 15 mm
Special nut A (included)
M10 nut (Obtained locall )
Special nut B (included)
Bolt Strength 980 to 1470 N (100 TO 150 kgf)
Special nut B
(included)
10 to 1 mm
M10 Nut
(Obtaied locally)
Anchor-Bolt Strength 980 to 1470 N (100 to 150 kgf)
Fig. 5
Fig. 6
All manuals and user guides at all-guides.com

FOR HALF-CONCESLED INSTALLATION
In order to check the drainage, be sure to use a level during installation of the indoor
unit. If the installation site of the indoor unit is not level, water leskage ma occur
CAUTION
Installation of Indoor Unit
Ceiling panel
Wall
When installing the indoor unit in a semi-concesled orientation, make sure to reinforce the
insulation of the unit on all sides. Drops of water ma fall from the unit if it is not
thoroughl insulated.
Glass wool insulate
(10 to 20mm thick )
INDOOR UNIT
(Top view)
Wall
Ceiling pannel
(2) Fasten the indoor unit into place b tightening-up the special "B",blots and the M10
nuts. Make sure that unit is secure and willl not shift back and forth.
Wall
Ceiling
16
Fig. 7 Fig. 8
Fig. 9
All manuals and user guides at all-guides.com

INSTALLING THE COUPLER HEAT INSULATION
After checking for gas leaks, insulate b wrapping insulation around the two parts (large
and small) of the indoor unit coupling, using the coupler hest insulation.
After installling the coupler heat insulation, wrap both ends with vin l tape so that there
is no gap.
Secure both ends of the heat insulation material using n lon fasteners.
When using an auxiliar pipe, make sure that the fastener used is insulated in the
sane wa .
17
Installation of Indoor Unit
Indoor unit
N lon fastner (large)
N lon fastner (small)
No gap
Coupler heat insulation
Coupler heat insulation(large)
Coupler pipe (large)
Coupler pipe (small)
Coupler heat insulation(small)
Indoor unit
Fig. 10
When installing the unit on the floor, fix the four rubber base feet in the accessories on
the bottom plate of the unit with four 4x16 screws and 4 flat washers,as the position in
the figure.
Notice
A
The bottom plate of the unit.
4:1
A
rubber base foot
4x16 screw
flat washer
All manuals and user guides at all-guides.com

18
Installation of Indoor Unit
DRAIN PIPING
Install the drain pipe with downward gradient (1/50 to 1/100) and so there are no rises or
traps in the pipe.
Use general hard pol vin l chloride pipe (VP25)[outside diameter 38 mm.]
During installation of the drain pipe,be careful to avoid appl ing pressure to the drain
point of the unit.
When the pipe is long,install supporters(Fig 11).
Do not perform air bleeding.
Alwa s heat insulate (8mm or over thick) the indoor side of the drain pipe.
BAD
GOOD
BAD
Supporter 5 to 6.5 ft
(1.5 to 2m)
Fig. 11
All manuals and user guides at all-guides.com