Haier ESA3183 User manual

m
What The World Comes Home To
o
Climatisation de Pi@e
CommandeEJectronique
= iiiii
i£ iiii
FAN HEO SLEEP
!;1o01=
00!054G412
Eead ins_uct;ons beFare installng.
Call 1-877-337-3639 for questions on parts and services
Life les instructions avant de procter _Pinstallatian.
Pour tortes qveshbnsconcernant les pi_ceset I'en_retlen,composez te 1-877-337-3639.
Lealas ]nstrucdones anie5 de ins_alar elapara_
tl_menos al 1-877-337-3639 sl tlene pregun_s sobre repuestos o servido_

Thank You Forbuying a dependable, energy saving and easy to operate
HAJERroom air conditioner This manuaJcontains useful information for
you to maintain, operate, install and safely useyour room air condifianer_
Your air conditioner deans, coals and dehumidifies the air in your room to
provide you with the ultimate bvel of comfort.
Pleaseread instructions carefully before using the producL Also, do not
forget to fiHout and mail the Product Registration Card.
Record Your ModeUand SeHaUNumber°
For all your service calls during the warranty period the bHowing
information will be needed. Affach the sales receipt to this guide and keep
for future reference. This information can be obtained from the serial pJate,
which is on your air conditioner: This is either on the cabinet (side or back)
or you may have to remove the front grille to Jocateit.

1)Air conditioner mustbe connectedto proper electrical outlet with the
correct electrical supply. (seetabJe)
_. 2) Proper grounding mustbe ensuredto reducethe risk of shockand fire.
DO NOT CUTOR REMOVETHEGROUNDING PRONG. If you do
not have a three-prong electricreceptacleoutlet in thewall, have a certified
electrician install the proper receptacle. Thewall receptacleMUSTbe
properly grounded.
3) Do not use if power cord isfrayed or otherwise damaged. Also avoid
using it ifthere are cracks or abrasion damage along the length, plug or
connector.
4) DO NOT USEAN ADAPTEROR AN EXTENSIONCORD.
5) When installing your air conditioner in a window, make surethewindow
is strong enough to hold the weight of the air conditioner. Youalso want to
secureand correctly install your air conditioner properly to prevent it from
falling. Extra brackets and or support may be required depending
on your window.
6) Do not block airflow inside or outside the air conditioner with blinds,
drapes, protective covers,shrubs or bushes.
7) Becareful of sharp edgeson thefront and rear finsof the unit that could
cut and cause seriousinjury.
8) Becareful when lifting the air conditioner to install or remove the unit.
Always usetwo or more people for this.
9) Always unplug theair conditioner before servicing it or moving it.

PAGE
A Word From Haler 1
P_duct Registration 1
Safely/Precautions 2
Warnings 4
ElectricaJSafely/ 4
Tips 5
Energy Saving Guide 5
FeQtures G-7
@peratlng Gulde 8-14
Normal Operating Sounds 8
Operating instructions 8-14
JnstaJJatians 15- 22
Parts ] 6
Tools ] G
Installing Unit into A Window ] 7-22
Clean and Care Gulde 23-24
TroubUeshaoting 24- 25
Warran_ Jnfarmatian 2G
3

Following the safety messagesis very important.
Thesemessagescan save you from being injured or killed.
Warning symboRsalert you to be carefuRand means Danger. AJways
follow instructions to be safe and reduce chancesof injury or deatk
Warning and Danger signswill precede safety messages.
Grounding: This room air conditioner mustbe grounded.
Grounding reduces the risk oFenectricshock by
providing an escape wire for the electric current.
The power cord has a grounding wire with a
grounding pJug. PJugif into an outlet that is
properly installed and grounded.
WARNHNG: mmproperuseof the grounding
pJugcan resuJtin a risk of electric shock.
Coil a qualified electrician if you don't understand
the grounding instructions or if you are not
sureif the air conditioner is properly grounded.
mfthe wall eJectricaJoutlet is not grounded, please contact an
eJectricianto have it repJacedwith a properly
grounded outJet.
DO nOtr Under Qny ¢_rcu_st_n¢esr CUt or re_ove t_e
thlrd (ground) prong from the power ¢or_.
Adapter PUug: We strongly advise against using an adapter plug.
4

®Air Conditioners are designed for use in a douHe hung window or
through the wall installation only (As appJicable in your model)
®While installing unit be sureto tilt air conditioner _/4 inch ouhvard to
havethe water drip outside the house.
s_k o mnstanlthe unit on the north side as normanlythat is the shaded side This
winJenhance the operation of your unit.
Window has to be strong for installation. Extra brackets and or support
may be required depending on your window.
• Measure the window before installing, if the window is too big Forthe
unit you may require professional installation.
_'_ Usecorrect electric voJfageand proper ampere for the unit to run
effectively.
,_® Only let a certified eledrician do any modifications fo your eledricol
outlet,
o When installing your air conditioner make sure to seaJaHareas where
there is a possibiJify of air Jeakage.
Airflow should not be bJocked inside either by curtains, drapes or
furniture or outside by shrubs or bushes
Do not needJessJyuse an eJectricaJJightor other appliances that
produce heat
Keep the vent dosed on the air conditioner when in the cooling function.
Keep the bJinds and the drapes drawn on all the other windows.
o While cooking usean exhaust fan in the kitchen to remove the excess
heat produced.
Always usethe correct BTUsize air conditioner to cool the room to
attain optimum efficiency.
5

_ou(hpad
1oThermostat
This allows you to adjust the temperoture of the air
The lower the seffing the cooler the air temperature
with this you can set the temperature fo your
desired comfort level You can setthe temperature
between 6U F and 86 ° F
2o Fan Speed
With this you can control the fan speed as "well as
the A/C (cooling) speed
You have 3 levels of A/C Speed for you to setat
your desired level LO will cilculate air at the
lowest vdoci_y, MED at medium vdod'ry and HUGH
will circulate at the maximum
You have 2 levels of Fan Speed to setat your
desired comfort level MED and LO
Aub Fan allows the room temperature to setthe fan
speed When the function is set, fan speed is to be
determined according to the difterence between the
s_ttemperature and the temperature inside the
room Once the settemperature is reached the fan
will run at the LO Setting
3o Fuectkm°
Your air conditioner has 3 Functions
a) A/C,
Here the air conditioner will operate the compressor
and the desired fan spe_d set to give you chilled
cold air for your comfort
b) Dehumid
This enables your air conditioner to operate as a
dehumidifier as well it will remove the excess
moisture from the air to keep your room at a
combrtabb dry stage You can use this feature
alone in case you do not desire to use the air
conditioner
c) Fan Only
You can run the fan only on not so hot days The
fan can be set to run at 2 speeds (rned fan, low fan)
as desired by you
4° Eeergy Saver
When turned "ON" the fan "will shut off 3 minutes
after the compressor cycle off, This wi[[ not only
save you electrical and energy costs but also shuts
off the unnecessary noise of the fan motor running
In the "OFF" position the fan will not shut off when
the compressor cycles off The fan will keep running
at the setlevel
5o Timer
Your air conditioner can be setto go on or off at
your desire This can be done up to 12 hours in
advance
6

6. Vent
The Fresh Air Vent aJlov,'sthe air col_di{Jol_erto
recircu_ate iltside ail', draw fiesh ail i_to dketooth
and exhattst stale ail' to the otltside.
7. 4Way Air FJew
These air directional Jouverslet you contrd the
direction of the air_low in your required direction
The airflow can be directed
up -down -right side -left side
8, SJide Out ¢has._is
Your Air Conditioner Becomesmore versatile with
this feature You have the option to install the unit in
a window or the wall
g, Wind@_ instil R:Jt
Enables you to install the air conditioner in a
double hung window Extra Bracketsor sugport
may Be needed depending or_your window
10. Remote Cor_w'oJ
This full functional "wirelessremote allows you to
operate your air conditioner from a d_stance You
need not have to get up to change the seitings, the
functions or to turn the unit on or off
11 oLED DJspJay EJectrorlic ConJ'_| Panel
The 4 function LEDdisplays Room1}_mperature,
Temperature Se_ting,Timer Setting and Time
Ren_aining to Stop /Start the unit Electr'onic
Control Panel letsyou setthe temperature to the
Exact ]emperature you desire
12o Sleep
When activated, this feature automatically setsan 8
hour shut off timer The unit will shut off in 8 hours

lller l @le tlHg Se ds
The folowing sounds are normally heard during the operation of an air conditioner,
o Cod airflow movementas didated by the set fan speed.
Water sounds. This is normaJas your air conditioner acts as a
dehumidifier aJso.Thusyou wil hear water sounds from water drops
faling on the condenser.
As the refrigerant tows through the inner sealed tubing a rushing noise
may be heard.
Railing or vibrating noises may be heard due to poor wal
or window instalafion.
*High pitch compressor sound may be heard.
@pe ethsg Ins tru¢lieHs
Folowing are the operating instructionsof your electronic air conditioner.
After instaling your air conditioner pJugit in to the proper dectricaJ outJet
in the wal Keepthe vent in the closed position. Now set the air
conditioner at your comfort bye[ This ful functional wireJessremote alows
you to operate your air conditioner without having to get up and go to the
unit. The ful function feature alows you to change the settings and turn the
unit on or off from the remote itseJf.This controJpad works the same as
the control pad on the air conditioner.
(See Fig # ])
Fig. # 1
Remote ¢@ntr@J

After you pJugin the unit it wi[[ perform a self test. A[[ the dispJaytights
will turn on for 3 seconds. The LED display will read "88". If any dispnay
light fails to turn on you may need service on the unit. A['fer the 3 seconds
self test the unit will automatically go to the stand by mode. Now all lights
will be off and you wilt have to turn "ON" by pressing the On/Off key
After pressing "On/Off", the unit starts to work and enters the status of
"Fan Only" with low seffing. You will haveto press the (+) or (o} key on the
TempiTime to set the temperature af your desired comfort. You can choose
beb_veen 61 °F and 86°R Once the temperature is set you can raise or
lower it by pressing the (+) or (o) keys, (Only when the unit is cooling or
dehumidifying, can the temperature seffing be adjusted.} (See Fig, # 2)
Having set the temperature you will set the function of the air conditioner.
ff you want to cool the room press the A/C function, mfyou need to only
remove the moisture press the Dehumid function. If you just need to usethe
fan only, press the Fan function. (See Fig. # 3)

Fig.#3
¢ontro) Panel
Fig. #4
Contro(
Once the function mode is decided you will have to set the fan speed_ If
you choose the A/C mode you can run the fan in one of the 3 speeds Hi,
Med., Lo or in the Auto speed, mnthe Auto speed the fan will start at High,
Med or Lo as the temperature varies in the room
Tr: temperature inside the room.
Ts:the set temperature.
When Tr >Ts+2°F, the Hi is to be automaticaJJy. When Tr_<Ts,the Lo is to be
set. When Ts<Tr_<Ts+2°F,the Med is to be set. Once the set temperature in
the room is reached the Auto fan setting wi(( have the fan running on Lo.
It takes 3 minutes to switch the fan speed, {See Fig # 4)
Panel
l0

Ifyou choose to use the Dehumid function, Thiswill remove excessmoisture
from the air on excessivelyhumid days,
Tr temperature inside the room,
Ts: the settemperature.
1) When Tr>Ts+3°F,the compressor will run continuously the fan at the
selectedspeed.
2)When Tsol°F_<Tr_<Ts+3°Fthe compressor will cycle for 10 minutes on
end 6 minutesoff.
3)When Tr<Tsol°F,the compressor will shut off,
The dehumidification process takes pJace between the settemperature _1
and 3°Fabove the settemperature, (See Fig # 5)
Fig. # 5
ControJ Panel
0
For cod days you may want to run the "Fan Only" function. Here the fan
runsonJyat one of 2 speeds,Meal or Lo. Thefan will not run at the High
speed. (See Fig. # 6)
Fig # 6
¢ontroj Panel
© i)
_IIUM]O J0_ ST_R
kJ k; ,,M
11

Fig # 7
Control
Timer start or Timer stop mode is used to pre=start or shut off your unit in
advance. You can program this up to ! 2 hours in advance. You can use
the Timer in 3 Functions i.e. A/C, Dehumid. or Fan Only
*Timer Start. (See Fig. # 7)
Unit must be on to set the timer. Unit will shut down automatically after it
accepts the settings in 5seconds Use this mode to presser the start time of
the unit ] 2 hours in advance.
a) Press Start, LED dispHay wilH show "XX" (time set Hasttime) when power
is connected first time, LED display wiHIshow "01" .
b) Set desired number of hours by pressing the (+) pad of the Temp/Time
buttons, one for each hour. Hfyou passed the desired time use the H pad
key to lower the selection.
,_Timer Stop (See Fig # 7}
Unit must be running to set the timer off. Use this to preset the time you
would Hikethe unit to shut off.
a) Press Stop, LED dispHay will show "XX" (time set Hasttime) when power
is connected first time, LED display wiHIshow "01"
b) Set desired number by pressing the (+) pad of the Temp/Time buttons.
One for each hour. If you passed the desired time, use the (o) pad key to
lower the selection.
When using the timer the unit wiHI use!revert to the last A/C and fan
settings when activated. The timer must be reset every time you choose to
use it.
PQFIte_
Q Q
Pressingthe mode onetime, the settingof Timerstart,Timer stopand sleep
can be done. Pressingthe mode for a secondtime, the settingiscanceHHed.
12

SJeepJetsyou preset the unit to shutoff in 8 hours. SJeepworks in the AiC
function only. After preoseffingthe temperature to a set degree,
the temperature raises by 2 degree in the I st hour and another 2 degree
in the 2nd hour and then remains constant in the next 6hours As your
body doesnot give out as much heat in the night and as nights generally
become cooler this feature Jetsyou sbep comfortably throughout the night
without having fo wake up to change the temperature settings.
(See Fig. # 8}
Fig. # 8
¢ontroU Panem
Haier _
EnergySaver: By pressingthis keyyou will activate the unit fo go in the
energy saver mode The fan will be off 3 minutes after the compressor
cycle ofF.By deactivating if the Jan keeps running at the set speedeven if
the compressor shutsofF. (SeeFig. # 9) (Thisfunction isavaiJabb in the
cooJing function onJy)
13

Fig. # 9
¢ontroJ PQneJ--
._(.Jq- 0@0@
When unit is in "On" mode the LEDdisplay wil showroom temperature.
Pressthe (+) keyto get settemperature. When unit is in "Timer Stop" func=
tion, LEDdispJaywil show the time left for the unit to shut off.
Tocancd TimerStoppressthe main Off key.
14

Before you install your air conditioner check the foJ[owing:
1) The unit is free of a[[ obstructions inside and outside the room eg. drapes,
curtains, furniture, pJants,shrubs, bushes, trees, other structures[ike building,
garage etc Air conditioner must have dear unobstructed airflow through the
condenser to remove the heat
2) Thewindow is strong enough to hold the weight of the air conditioner.
Extra brackets or supports may be needed depending on your windows.
3) Thewindow si[[ and track are strong enough to hold the weight of the
air conditionen
4) Thewail is strong enough to hold the unit. Extra bracketsor supports may be
needed depending on the wail
5) There is adequate and proper power supply near the air conditioner.
_6) DO NOT useadapter plugs.
_7) DO NOT useextension cords.
_8) DO NOT cut or remove the ground prong.
9) DO NOT modify the plug or the eJectrica[waJ[outlet in any way.
mfpJugdoes not fit the dectricd outlet have a certified electrician do the
necessarychange.
_10) DO NOT connect electrical power to the unit before installation.
_1 ! ) DO NOT use if power cord is worn out, frayed or otherwise damaged
Avoid using if there are cracks or abrasion damage along the length,
plug or connection.
15

Parts
You will need b have the following rods b help you in the installation of
your air conditioner.
oSdssors
oPhiHipsScrewdriver
®Standard Screwdriver
oPliers
oWrench
_DriH and DriH Bits
oTapeMeasure
®GJoves
®Levd
®Sockets
16

Installing Unit into A Window
Window Openillg Requirements
The air conditioner is designed {o fi{into double or single hung sash ffpe windows. Ea<h of tim
m_its comes with an installation kit flint pIovides adjustable mounting louvers, to fill the gaps
betwee_t the sides of the mtit, and the window hame. The chart below reflects tim dimensions of
the units with, and wiflmut instMlation kits. Measure your window opening width and compare
itto the chart below to ensure that it meets the minimum and l-ng_imum window wid{h requirements.
]_ D L]
ESA3183 ESA3243
FSA3183 FSA3243
Minch)
g(inch)
C(inch)
D(inch) Max
[)(inch) Min 3o@
Case High 18:_"
Case Widd_ g; _I;"
Case DepflJ
Models ESA3183 ESA3243
I PREPAREUNg
FOR
|NSTALLATION
17

ASSEMBLE
CURTAINS/TOP
RAIL
Install top rail _,_ilh four 13/32" sir(ws
Slide left hand curtain asseinhly
hllo left end of top and bottoln
rails¸ Repeat k)r right hand curtain
assemb_ Fasten curtain retainer
sIrips to sides of outer case with
six 13/32" screws.
PREPARE
WINDOW FOR
INSTALLATION
hlspeci window track, sash. and sill
lot its abilfly to supporl tll+ weiRhl of
air condilkm+ r
Measure width belween window
moldiiNs to ensure Instant Moun(
will lit window hame Instant Moun(
models are designed _r windows
wide (the de(all see page l 7)
Storm windov¢ installation
If storm window ll'alne does not allow
adequale clearance below sill (1/2"
required), remove storm window
h'an/e or creale dearance by adding a
wood strip (al leasl 1 1/2" wide) along
+ntire width of sill ELIS{ellwood strip
to sill with at least three counwrsunk
wood screws 01ol stlpplied with kit)
This provides a smooth surface lbr
mounting air condilion+ r
I/2'
his{ant Mount kit suppli( d with unit i[S!L_
is d(signed for motlnting in most
douhl( hungwJndows wilhouI I)N/ U(
storIll windovcs I,or installation in o T
window l]'aln+ with storm window, o i I)
modiIy sill by adding wood strips(not _ o
indtld(d) to inner and OtlI(r sills This storm Window R
raises unit and diminat+ s inter f_r_ n<_ Flame
cfs {orln window [ram(
Mobile honle window installatiot:
Add wood s(rip (at least 1 1/2" wide)
along entire width of window sill¸
Thickness of wood strip shouM match
height (if fion( lip on window hame
Fasten wood sIrip to sill with a
minilnum of three counterstlnk wood
screws (no( supplied wi(h kit)¸ This
provides a smooth sur_ce _r
moun(ing ak conditioner¸
Must be l ml{flmtff[i
18

INSTALL OUTER
CASE IN WINDOW
P_ace otlter case _ii window _OWel
sash ulltil i_rests behind I}'oJlt ll;mge
of _ot} rail Bottom rail itlus[ rest
behind window sill
19