Haier HW-18L2H User manual

WINDOW TYPE ROOM AIR CONDITIONER
USER MANUAL
HW-18L2H / HW-18L2V
HW-18L3H / HW-18L3V
HW-24L1H / HW-24L1V
• Please read this operation manual
before using the air conditioner.
• Please keep it attentively.
Haier
Inspired Living
P/No. HA 0500025

Dear Friend,
At the outset, we at Haier thank you for your interest in our range of products. A
unique and international range of appliances designed solely with the purpose of
making modern life simpler. But how! The entire Haier range of appliances,
ranging from refrigerators, televisions, washing machines, airconditioners,
microwave ovens, dishwashers and wine-coolers, combines the best of
technology, features, performance and styling. All, a result of our perfect
understanding of your lifestyle and your needs.
But what is a great product without great service? Leaving no stone unturned in
giving you the best of service, we have also established an extensive network of
authorised dealers and authorised service centres, so that you get a lifetime of
great and timely service for your Haier appliance.
It has been an honour and a pleasure bringing these hi-tech products to you and
we hope that you get as much happiness using them as we have got, creating
them for you.
Happy Inspired Living!
Thanking you,
Haier
Inspired Living

Contents
Parts Names.4
Parts & Functions.5
Operation Guide.6-9
Usage Musts.1°
Maintenance. \ \ A 2
Cautions .13
Trouble Shooting.14
Installation Instructions.15
Installation Guide.16

Parts Names
Machine body
Air inlet (outdoor side)
Front panel
Air outlet (indoor side)
Air inlet (indoor side)
Operation panel
Cabinet
Remote Controller
Operation Panel
LCD Remote
CLOCK

Parts and Functions
Operation Buttons and display of the remote controller.
Clock set
1. Mode display
AUTO \7
COOL*
DRY *
FAN ®
2. SWING display
3. FAN SPEED display
4. SLEEP display
5. LOCK display
6. SIGNAL SENDING
llll—I —ll—ill
AUTO LO MED HI
7. TIMER OFF display
8. TIMER ON display
9. CLOCK display
10. TEMP display
11. POWER ON/OFF
Used for unit start and stop.
12. MODE
Used to selectAUTO run, COOL,
DRY and FAN operation
13. FAN
Used to select fan speed LO, MED, HI, AUTO
14. HOUR
Used to set clock and timer setting.
15. SWING
Used to set auto fan direction.
16. SLEEP
Used to select sleep mode.
17. LOCK
Used to lock buttons and LCD
display.
18. TEMP
Used to select your desired temp.
19. SET
Used to confirm timer and clock settings.
20. TIMER
Used to select TIMER ON, TIMER OFF,
TIMER ON-OFF
21. CLOCK
Used to set correct time
22. RESET
Used to reset the controller back to
normal condition.
23. H EALTH
Used to set healthy operation.
When unit is started for the first time and after replacing batteries in remote controller,
clock should be adjusted as follows:
Press CLOCK button, "AM" or "PM” flashes.
PressAorVto set correct time. Each press will increase or decrease Imin. If the
button is kept depressed, time will change quickly.
After time setting is confirmed, press SET "AM "and "PM" stop flashing, while clock
starts working.
NOTE: Cooling only unit do not have displays and functions related with heating
Hints
After replacing with new batteries, remote controller will conduct self-check, displaying
all information on LCD. Then, it will become normal.
5

Operation Guide
POWER
Press the ON/OFF key on the Control Panel or Remote Control to turn the unit
On/Off. The A/C starts with the previous setting.
MODE
The unit can be operated in any one of the following modes :
1) Cool: The temperature setting is adjustable between 16°C and 30°C.
The temperature setting can be changed using Up and Down keys
on your remote control or control panel.
2) Dry : This mode removes excess humidity from the room. The Fan
speed is automatically set to Low speed to allow condensation of
moisture.
3) Fan : Compressor will be OFF in this mode and only Fan will operate.
Fan speed can be changed by using “Fan” key on the remote control.
FAN SPEED
Pressing the Fan key will change Fan speed with the sequence below
• Low-Medium-Ftigh-Auto
• Auto Speed is only activated in Cool Mode
SWEEP /SWING
Press the SWEEP / SWING key on remote control or Control Panel to activate
automatic swing of the vertical louvers. The louvers will oscillate left and right
automatically. Pressing the sweep key again will stop the louver swing.
SLEEP
This feature ensures your sound sleep at night. Pressing this key changes set
temperature automatically by 1 °C per hour for 2 hours..
ENERGY SAVER
Pressing this key will activate preset setting for the A/C which will operate the unit on
Energy Efficient setting. “ES” will be displayed on the Control panel. This function is
active only in cool mode.
TEMP.& UP/DOWN KEY
Press Temp, key to set the desired temp, in Room and UP/Down Key used to
increase and decrease temp.

Operation Guide
TIMER Operation
Set Clock correctly before starting Timer operation
You can let unit start or stop automatically at following times: Before you wake up in the
morning, or get back from outside or after you fall asleep at night.
TIMER ON/OFF
(1 JAfter unit start, select your desired operation mode.
Operation mode will be displayed on LCD.
Power indicator on unit lights up.
(2)TIMER mode selection
Press TIMER button to change TIMER mode.
Every time the button is pressed, display changes as follows:
— ► EH —*- maa — ► ■ «:.’ ■ 0 maa — ► blank
TIMER ON TIMER OFF TIMER ON-OFF
Select your desired TIMER mode (TIMER ON or TIMER
OFF) ON or OFF will flash.
(3)Timer setting
Press HOURA/ V button.
A Every time the button is pressed, time increases 10 min.
If button is kept depressed, time will change quickly.
V Every time the button is pressed, time decreases 10 min.
If button is kept depressed, time will change quickly. Time
will be shown on LCD. It can be adjusted within 24 hours.
(4)Confirming your setting
After setting correct time, press SET button to confirm, "ON"
or "OFF" stops flashing
Time displayed: Unit starts or stops at x hour x min. (TIMER
ON or TIMER OFF).
Timer mode indicator on indoor unit lights up.
To cancel TIMER mode
Just press TIMER button several times until TIMER mode disappears.
Hints
After replacing batteries or a power failure happens, Time setting should be reset.
Remote controller possesses memory function, when use TIMER mode next time, just
press SET button after mode selecting if timer setting is the same as previous one.
7

Operation Guide
TIMER ON-OFF
(1 )After unit start, select your desired operation mode
Operation mode will be displayed on LCD.
Power indicator on indoor unit lights up.
(2) P ress TIMER button to change TIMER mode.
Every time the button is pressed, display changes as follows:
— ► EH — ► EH3 — ► »«]? ■ 0 E33 — ► blank —
TIMER ON TIMER OFF TIMER ON-OFF
Select TIMER ON-OFF. "ON" will flash.
(3)Time setting for TIMER ON
Press HOUR button.
A Every time the button is pressed, time increases 10 min.
If button is kept depressed, time will change quickly.
V Every time the button is pressed, time decreases 10 min.
If button is kept depressed, time will change quickly.
Time will be shown on LCD.
It can be adjusted within 24 hours.
AM refers to morning and PM to afternoon
(4) T ime confirming for TIMER ON
After time setting, press TIMER button to confirm.
"ON" stops blinking, While "OFF" starts blinking.
Time displayed: Unit starts at x hour x min.
(5)Time setting for TIMER OFF
Follow the same procedures in "Time setting for TIMER ON".
(6) T ime confirming for TIMER OFF
After time setting, press SET button to confirm, "OFF" stops flashing
Time displayed: Unit stops at X hour X min.
To cancel TIMER mode
■ Just press TIMER button several times until TIMER mode disappears.
8

a
r
Operation Guide
HEALTH Mode operation
1. Unit start
Press the ON/OFF switch
2. Health function
Press the " HEALTH"once ," fi*" is displayed now the
air conditioner is operating the healthy function.
Press the " HEALTH"again, then the healthy function
stops.
Note :*&.** features are applicable for selected models.
Remote controller's operation
• When in use, put the signal transmission head directly to the receiver hole on the unit.
• The distance between the signal transmission head and the receiver hole should be within 7m
without any obstacle as well.
• Don't throw the controller, prevent it from being damaged.
• When electronic-started type fluorescent lamp or change-over type fluorescent lamp or wireless
telephone is installed in the room, the receiver is apt to be disturbed in receivering the signals
so the distance to the unit should be shorter.
Loading of the battery
Load the batteries as illustrated. 2 No. AAA batteries
Remove the battery cover:
Slightly press "y" and push down the cover.
Load the battery:
Be sure that the loading is in line with the" + V-"
pole request as illustrated.
Put on the cover again
Confirmation indicator:
In disorderation, reload the batteries or load the new batteries after 6mins.
Note:
Use two new same-typed batteries when loading.
Power failure resume(please set and apply as necessary)
If sudden power failure occurs, the unit will resume original operation when power is
supplied again.
Note:
When sudden power failure happens during unit operation in power failure resume mode, if
the air conditioner is not desired for use in a long period, please shut off the power supply
in case that the unit automatically resume operation when power is re-supplied, or press
ON/OFF to turn off the unit when power resumes.
9

Usage musts
Do remember the following:

Maintenance
Air filter cleaning: Please clean the air filter every two weeks
When dirt accumulates in the air filter, air circulation will be blocked, and causes poor cooling.
It is advisable to clean the air filter every two weeks for efficient operation.
Removal of air filter
1. Loosen the air inlet by opening Inlet Grill at
both edges as shown.
2. Open the air inlet.
3. Hold the handle at lower part of the air filter
and draw outward to remove the air filter.
Air filter cleaning
1. Gently tap the dirt off the air filter.
2. Carefully wash the air filter in warm water (below 40°C)
To obtain better cleaning effect, soapy water or neutral
detergent may be used.
3. Flush the air filter carefully with clean water after
removing the dirt. Let it dry completely.
Installation of filter
(1) Put the air filter on.
(2) Close the Inlet Grill again.
Disposal of condensate
1. The drain hole on the bottom of the air conditioner will be clogged by a rubber stopper to make the
condensate in the bottom tray be spattered onto the condensator to raise efficiency of heat
exchange. If the spattering sound disturbs you,you can adopt the method illustrated below.
2. Remove the rubberseal from hole on the bottom in order to make the condensate run out.
* Power cord: Only to use an exclusive power cord.
Changing installation site: If the air conditioner needs to be changed to another
location, please contact the dealer that sold you the unit.

Maintenance
12

Cautions
Avoid opening doors and windows Keep heat sources away from the
as much as possible. air conditioner.
Use curtain or blinds. Before operating the mode selection
Direct sunlight may reduce cooling switch, check whether the air inlet
effect, so always use window curtain. or outlet has been blocked.
For longer and trouble-free operation of the unit, pay special attention to the following:
* Install the air conditioner at a location strong enough to support the unit.
* Leave enough space around the air inlet and outlet for better circulation.
* Avoid sites where flammable gas leaks.
* Problems may occur if the unit is installed in the following areas:
* Place where oil exists in the air including engine oil, seaside with
salt breeze, and hot springs area with air-borne sulfurous gas.
13

Trouble Shooting
Condition Check Item Corrective Action
Doesn't
operate
Is plug firmly inserted?
Is fuse burned out?
Is there power failure?
Restore power or replace
fuse.
Is thermostat switch
incorrectly adjusted?
Adjust the themostate.
Is there direct sunlight
into the room?
Use curtain or blinds.
No cool air of
poor cooling
Is mode selection switch
set to fan mode?
Are doors or windows left
open?
Select cool mode.
Shut doors and windows.
Is there any obstacle
blocking air inlet or outlet?
Remove the obstacle.
Is the fresh air window
shifted to the open?
Is there a strong heat
source in the room?
Close the fresh air
window.
Remove or turn off the
heat source.
Is air filter clogged?
Remove and clean.
If problems cannot be solved, please pull out power plug and contact your dealer.

Installation Instructions
Selection of the installation position
1. Select position where the structure is firm.
2. Select position where the air inlet and outlet are not blocked by obstacles.
3. Select position where the cooled air can be blown to every corner of the
room.
4. Select position where there's no direct sunlight. If sunlight cannot be
avoided, some means of sun shade is required.
5. Select position where the outdoor airflow will not bother neighbors.
6. Select position where condensation drainage is not impeded.
7. Select position where there's no dangerous gas or oil vapor nearby.
8. An extension cord is not recommended.
Installation diagram
The unit must be installed so that the back (outdoor side) is lower to allow
drained water to flow out smoothly.
Width of wall should be
less than 295mm
Minimum distance
Requirements for electricity:
1. Applicable ambient temperature range is 21°C ~ 46°C.
2. If the power supply cord is damaged, it must be replaced by the manufacturer,
the service, agent or a similar qualified supplier. An extension cord is not
recommended.
3. The wiring method should comply with local wiring standards.
4. After installation, the power plug should be easy to access.
5. The breaker of the air conditioner should be an all-pole switch (25A) and the
distance between its two contacts should be no less than 3mm.
6. The appliance must be connected to a socket outlet with the appropriate rating.
7. The appliance is not intended for use by young children or infirm persons without
supervision.
8. Young children should be supervised to ensure that they do not play with the '
appliance.
15

Installation Guide
Installation of air conditioner (only for reference)
1. Make a wooden frame. (Fig.1)
Fig. 1
2. Attach a metal support (not provided by manufacturer) in a
firm location with expandinq screws or
bolts.
3. Remove the air conditioner from its packing condenser
carton. _ /
4. Place the air conditioner on the metal support. / \\
5. Stuff gaps in the wall or window with soft \\
sponge material or rubber gaskets to block \\
outside noise and keep cool air from escaping. I 7
6. Let the rear of the air conditioner raiseslightly, the \ \ /
drain hole on the bottom canbe seen. Clog it by a '- \—' rubberiid
black rubber stopper attached to the air conditioner In factory Fig.2
(see Fig.2)
7. The condensate need to be led to the
designated place, buy a soft plastic pipe with
internal diameter of 16mm to connect the drain
connecting pipe and tied it tightly. (See Fig. 3)
Fig.3
Supplied accessory parts.
Name Manual
M4x 10
Screw
N8 x 32
Screw
Drain tray
Rubber lid Remote controller
Battery
Appearance
teu
/*
It
X
IT
m
Quantity
i 5 4 i
i i 2
Note: After finishing the installation of the air conditioner, fix the panel board onto
the casing withone front attachment screw and two side attachment screws.

HAIER WARRANTY
HAIER Appliances (India) P.Ltd (hereinafter referred to as “the company”) hereby
offers the following warranty to the original domestic purchaser commencing from
the date of the purchase.
Product Warranty
Period Parts not coverd
Colour TV
12 Months
Remote, Cabinet
Refrigerator
Comprehensive: 12 Months
Compressor: 60 Months
Plastic Parts, Glassware,
Light bulb
Washing
Machine
Comprehensive: 24 Months
Motor: 60 months
Top lid, Outer steel Cassing
Air-Conditioner
Comprehensive: 12 Months
Compressor: 60 Months
Air filter, Front grill Remote
Microwave
12 Months
Glass plate, Light bulb
Dishwasher
12 Months
Plastic parts
Cloth Dryer
24 Months
Plastic parts
Dvd Player
6 Months
Remote, Plastic parts
Home Theatre
6 Months
Remote, Plastic parts
TERMS AND CONDITIONS
1) The company will, free of charge repair or replace any defective part or parts which
prove to be defective in workmanship and / or materials and not due to abnormal or
improper usage, at its sole discretion.
2) This warranty will automatically terminate on the expiry of the applicable warranty
period from the date invoice.
3) While the company will make every effort to carry out the repairs as soon as
possible, however the Company is not liable for any delay in servicing due to
reasons beyond the control of the company or any of its authorized service center.
4) It is entirely left to Company's discretion to repair/replace parts at the site of
installation or at the authorized service centers of the Company.
5) This warranty shall be strictly limited to the repairs or replacement of defective parts
specified in the warranty.
6) The parts shall be replaced by funcitionally operation equivalent material only and
not will brand new ones and are likely to be different from the one originally fitted.
The parts thus removed shall be taken back by the company.
7) This warranty will continue to be in force for the term herein specified, irrespective of
what replacements may be provided under it, and such replacement shall not attract
any fresh warranty.
8) The Company reserves the right to reatian any part or component replaced at its
sole discreting during the warranty period.
9) This warranty shall not in any case extend towards payment of any monetray
consideration whatsoever or replacement or return of the Product.
10) In no event the Company or its authorized service center be liable for any
consequential damages or resulting liability, damage or loss arising directly or
indirectly out of any defect in the Appliance.

11) During the period of additional / non comprehensive warranty, visit charges as
applicable will be payable in additional to and fro charges.
12) In case of DVD player, the customer will have to bring it to the nearest authorized
Haier Service Center other wise visit charges will be applicable.
13) Demo for Direct Cool Refrigeration, Semi Automatic Washing Machine, CTV below
74cm and DVD will be on chargeable basis by the company, however the call center
can provide support over telephone.
14) Any change of location or change in the ownership during the warranty period must
be intimated in writing to the company.
15) The company's employees or its authorized representatives or dealer / service
franchisee have no authority to vary the terms of this warranty.
16) The company is not liable to provide service support beyond 5 years after the end of
manufacturing of the particular model of the product except in cases where the
product is covered under warranty.
17) This warranty is effected in New Delhi and claims, if any, shall be a made only
before the courst having jurisdiction in New Delhi and no claim shall be made
against the company outside New Delhi not with satading that the appliance may
have been sold ordelivered elsewhere.
18) T his warranty is not valid in case of the following events:
a) If the Product has been installed/Service/Repaired/Opened or tampered by any
unathorised personnel.
b) If original serial number is removed or obliterated from the product.
c) If defects arise/caused by improper electrical circuit, major fluctuations in voltage,
alteration,misuse, neglect, substitution of original components with spurious/non-
genuine components, attacked by household pest/rodents, fire, flood, earthquake,
lightning and/or other accident or act of God/natural calamities.
d) T he product is shifted outside India.
Warranty void if Invoice does not carry Product Sr. No.
For Complaints/Queries, Please Call us at: ■
Haier
1860-200-99-99
O' (Toll Free-24x7)
SMS : Haier to 56677
email: [email protected]
x
HATER APPLIANCES (INDIA) P. LTD.
B-l/A-14, MOHAN COOPERATIVE INDUSTRIAL ESTATE. NEW DELHI-110044.
Customer Name.Address.
Serial No.Date of Purchase.
Model
Dealer Seal

w- ■
i a
L J|
n"2
?A

f
Haier
CUSTOMS A f CARS
1860-200-99-99
Toll Free-24 >7
SMS
’Haler'to 56677
Email
[email protected]
Haier
Inspired Living
Haier Appliances (India) P. Limited
B-1/A-14, Mohan Co-operative Industrial Estate, Mathura Road, New Delhi-110044.
Tel:[phone], Fax:[phone]. Email: [email protected] Website: www.haierindia.com