Haier HLTD500ACW User manual

SERVICE MANUAL
This service information is designed for experienced repair technicians only and is not designed for use by the general public. It does not
contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to service a product. Products powered by
electricity should be serviced or repaired only by experienced professional technicians. Any attempt to service or repair the product or
products dealt with in this service information by anyone else could result in serious injury or death
Top Load Electric Dryer
Order No. TL1501S003V1.1
WARNING
©2008 Haie
Edition
r Dryer Machine
All rights reserved. Unauthorized copying and distribution is a violation of law.
H ier Group
Model No.HLTD500ACW

SERVICE MANUL
Model No.HLTD500ACW
Contents
Chapter 1 General Information ________________________________________________
1-1. General Guidelines_____________________________________________________
1-2. Caution and Warning symbols ____________________________________________
1-3. Function indication symbols ______________________________________________
Chapter 2 Product Feature ___________________________________________________
2-1. Features _____________________________________________________________
2-2. Specification __________________________________________________________
Chapter 3 Matters needing attention ___________________________________________
3-1. Safety _______________________________________________________________
3-2. During Use ___________________________________________________________
Chapter 4 Operational Guidance ______________________________________________
Chapter 5 Drying Mathods ___________________________________________________
5-1. Preparations before drying _____________________________________________
5-2. Load clothes into dryer ________________________________________________
5-3. Selecting Drying program ______________________________________________
Chapter 6 Appearance brief introduction ______________________________________
6-1. Name of parts _______________________________________________________
6-2. Net dimension_______________________________________________________
Chapter 7 Disassembly and Installation _______________________________________
7-1. Remove packing materials _____________________________________________
Issue
Rev.
- 1 -
3
3
3
3
4
4
4
6
6
7
9
12
12
12
12
13
13
13
14
14
7-2. Exhaust Requirements ________________________________________________
7-3. Adjusting the Dryer ___________________________________________________
7-4. Electrical Requirements _______________________________________________
14
15
15

7-5. Location of your dryer _________________________________________________
7-6. Manufacation (mobile) home installation __________________________________
7-7. Electrical installation __________________________________________________
7-8. Electrical connections
Chapter 8 Wiring circuit and Electric appliances parameter________________________
Chapter 9 Error Display and troubleshooting ___________________________________
9-1. Error Display _________________________________________________
9-2. Examination & Troubleshooting ________________________________________
9-2-1.
Display nothing ____________________________________________
9-2-2.
The computer is power on and display right,but the dryer no action
9-2-5. Use the “AUTOMATIC CYCLES” program the clothes is very dry but the dryer
is drying at all times_
9-2-6. Too much noise in drying ___________________________________________
Chapter 10 Maintenance ____________________________________________________
SERVICE MANUL
Model No.HLTD500ACW
Issue
Rev.
- 2 -
16
17
18
18
21
22
22
24
24
25
26
26
27
29
9-2-4. Use the “AUTOMATIC CYCLES” program the dryer is drying but the clothes
can’t intensive drying end the program_
________________________________________________
9-2-3. Press the "Start/Pause" button once the dryer have no action, the cycle signal
will beep twice ___________________________________________________
9-1-1. The Digital Tube display “F3” _______________________________________
9-1-2. The Digital Tube display “E6”,the “Clean Lint” indicator light is twinkling ________
25
22
23
22
9-1-3. The Digital Tube display “F4” _______________________________________
8-1. Wiring Circuit 21
________________________________________________________
8-2. Electric Appliances Parameter 21
__________________________________________
9-2-7. The lamp is not bright when open the door 27
9-2-8. The barrel is continuing runing after opening the door 28

Chapter 1 General Information
1-1. General Guidelines
When servicing, observe the original lead dress. If a short circuit is found, replace all parts which are
overheated or damaged by the short circuit. After servicing ,see to it that all the protective devices such as
insulation barriers ,insulation papers shields are properly installed .Confirm that the screws, parts and wiring
which were removed in order to service are put in the original positions, or whether there are the portions
which are deteriorated around the service places serviced or not. And be sure safety of that.
1-2. Caution and Warning symbols
(You will see them in “Matters needing attention”)
Any instructions in this service manual with this “Warning “sign must be followed strictly.
1-3. Function indication symbols
(You will see them in the specification table)
Signify the drying machine has this function.
Signify the drying machine doesn’t have this function.
SERVICE MANUL
Model No.HLTD500ACW
Issue
Rev.
- 3 -

Chapter 2 Product Feature
2-1. Features
(1). Humidity sensor for automatic drying performance.
Automatic Cycles allow you to match the cycle to the load you are drying. A humidity sensor detects the
moisture in the load and automatically adjusts the drying time for optimal drying.
(2). 5-temperature 3-dry level and 10-program drying setup for energy saving.
(3). Touch Up.
(4).Damp Signal.
(7). Acentric switch more safer.
2-2. Specification
SERVICE MANUL
Model No.HLTD500ACW
Issue
Rev.
- 4 -
(5) Wrinkle saver
(6) End of cycle signal.
Use this setting to help smooth out wrinkles.
The program resches damp status, prompts the user to remove the clothes needing to iron.
At the end of the dry cycle, the dryer will automatically go into the wrinkle saver mode.Here the dryer
tub will tumble periodically for an hour after the dry cycle is completed, (and the wrinkle-time also can
be adjusted.) To stop, simply open the door and remove the clothes.
The dryer is equipped with an audible signal that alert you every time the dryer load is
finished drying.
Drying machines HLTD500ACW
Product identification
Description of appliance Drying machine
Type of appliance(FS = standing, BI = built-in) FS
Supplier own brand Haier
Supplier bar code (America) EAN
Commercial Brand / Model -
1.
Commercial bar code EAN TBC
Key-Features
tf.uC0.7yticapacmurD
2.
Approvals (CSA) CSA
3. Basics data
8001*777*686mm)DxWxH(snoisnemidtinU
Net weight lb. 127.5
Voltage/frequency V/Hz
Rated Input Power / 4800W
Work top / removable -
Control M= electromechanical, E= electronic, F= fuzzy E
Drum S= stainless steel / Z= zinc coated Z
Door:
aesthetic (R= round, Y= big eye, Q= square) Q
Door frame S= stainless steel / M= metal / P= plastic M
Adjustable feet n° 4
120/240V~60Hz