Haier H32D6M User manual

LED LCD TV
OWNER' S MANUAL
Please READ this manual carefully
before operating your TV, and retain
it for future reference
MODEL: H32D6M
H43D6FM

Trouble Shooting.................................................................... 21
Safety and warnings.................................................................2-3
Introduction............................................................................4
Installation.............................................................................6-8
Remote Control...................................................................... 9
Operation............................................................................... 10-20
-1-
Contents
Base stand assembly.................................................................5

-2-
SAFETY AND WARNINGS
IMPORTANT SAFETY INSTRUCTION
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK).NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
CAUTION
The symbol indicates that dangerous
voltages constituting a risk of electric shock
are present within this unit.
The symbol indicates that there are
important operating and maintenance
instructions in the literaturaccompanying this
unit.
To reduce the risk of fire or electric shock, do
not expose this apparatus to rain or moisture.
WARNING:
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings, install
in accordance with the instructions.
8) Do not install near any heat sources such as
radiations, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9) Do not defeat the safety purpose of the
polarized plug. If the provided plug does not fit
into your outlet, consult an electrician for
replacement of the obsolete outlet.
10) Protected the power cord from being walked
on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
11) Only use attachments/accessories specified
by the manufacturer.
12) Unplug this apparatus during lighting
storms or when unused for long periods of time.
13) Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or
has been dropped.
14) Mains plug is used as the disconnect device,
the disconnect device shall remain readily
operable.
15) The ventilation should not be impeded by
covering the ventilation openings with items,
such as newspapers, table-cloth, curtains, etc.
16) No naked flame sources, such as lighted
candles, should be placed on the apparatus.
17) Attention should be drawn to the
environmental aspects of battery disposal.
18) The use of apparatus in moderate climate.
19) The apparatus shall not be exposed to
dripping or splashing and that no objects filled
with liquids, such as vases, shall be placed on
the apparatus.
20)Warning: To avoid any injury caused by lean
of the product, please always ensure the whole
product was placed within the table surface in
horizontal.
This symbol indicates that this product
incorporates double insulation between
hazardous mains voltage and user accessible
parts. When servicing use only
identical replacement parts.
This marking indicates that this product should
not be disposed with other household wastes
throughout the EU. To prevent possible harm to
the environment or human health from
uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of
material resources. To return your used device,
please use the return and collection systems or
contact the retailer where the product was
purchased. They can take this product for
environmental safe recycling.
The batteries shall not be exposed to
excessive heat such as sunshine, fire or the
like.
WARNING:
RISK OF ELECTRIC SHOCK
DO NOT OPEN!
CAUTION

-3-
High voltages are used in the operation of this television
receiver. Do not remove the cabinet back from your set.
Refer servicing to qualified service personnel.
SAFETY AND WARNINGS
To prevent fire or electrical shock hazard, do not expose
the television receiver to rain or moisture.
Do not drop or push objects into the television cabinet
slots or openings. Never spill any kind of liquid on the
television receiver.
Do not block the ventilation holes in the back cover.
Adequate ventilation is essential to prevent failure of
electrical components.
Do not trap the power supply cord under the television
receiver.
Never stand on, lean on, or suddenly push the television or
its stand. You should pay special attention to children.
Serious injury may result if it falls.
Do not place your television on an unstable cart, stand,
shelf or table. Serious injury to an individual , and damage
to the television, may result if it falls.
When the television receiver is not used for an
extended period of time, it is advisable to disconnect
the AC power cord from the AC outlet.
Avoid exposing the television receiver to direct sunlight
and other sources of heat. Do not stand the television
receiver directly on other products which give off heat,
e.g. video cassette players and audio amplifiers. Do not
place naked flame sources, such as lighted candles on
the television.
Dim:515*320 mm(
不包括底座）
If the television is to be built into a compartment or similar
enclosure, the minimum distances must be maintained. Heat
build-up can reduce the service life of your television, and
can also be dangerous.

INTRODUCTION
-4-
Main features
① ；
Used as Television, display terminal
② ；
High luminance, wide viewing angle
③ ；
Can store Air and Cable TV programs
④ ；
HDMI interface
⑤ Multi-Media player (USB);
Accessories
Main parameter
MODEL
Resolution
Aspect Ratio
TV System
Receiving Channel
Power consumption
Signal input/output
Horizon
Video Signal System
Input Power Voltage
Audio Output Power
（
THD 10%
）
tal definitio n
（
TV line
）
Composite Video
input >=350
Y Cb(Pb ) Cr(Pr )
>=400
16 : 9
PAL-BG, DVB-T, DVB-C, DVB-T2,DVB-S2
PAL/NTSC/SECAM
DVB-T2:1000, DVB-C:1000, ATV:99
100-240V~, 50/60Hz
High-Definition Multimedia Interface(
HDMI) x 3
Composite Video Input x 1
Audio Input x 1
YCb (Pb )Cr (P r) x 1
USB x 1
VGA x 1
HEADPHONE x 1
RF x 1
COAXIAL x 1
LNB IN x 1
CI x 1
2x8W
55W
Remote Controller......................... 1
User’ sM anual...............................1
Battery(AAA)...............................2
1366x768
H32D6M
The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
PC Audio x 1
1920x1080
H43D6FM
75W

WALL MOUNT INSTALLATION
(32"/43":M6x10mm/2pcs)

HDMI1
VIDEO L R VGAHEADPHONE PC AUDIO RFDVB-S
HDMI2 HDMI3(ARC) USB COAXIAL
MINI YPbPr
COMMON INTERFACE(CI)
INSTALLATIONINSTALLATION
All the terminals are (from left to right):
HDMI2, HDMI3(ARC), USB, Mini YPbPr Input, CI, COAXIAL output.
All the terminals are (from left to right):
HEADPHONE output, VGA, PC Audio, VIDEO, AUDIO input(L/R), DVB-S, RF, HDMI1.
REAR AV Connections (SIDE)
REAR AV Connections
-6-
43"
10E
APP
STORE
10E
APP
STORE

INSTALLATION
-7-
PRESET MODE (HDMI)
1
2
3
800*600
1024*768
60
60
37.88
48.36
RESOLUTION V.Freq.(Hz) H.Freq.(KHz)
1360*768 60 47.7
4 1280*768 60 47.3
5
1920*1080 60 67.5

HDMI
VIDEO EQUIPMENT
Y
W R
W R
Y
VIDEO EQUIPMENT with YPbPr
GB R
GB R
INSTALLATION
-8-
It can be connected to the following appliances: VCR, multi disc player, DVD, camcorder,
video game or stereo system, etc.....
YPbPr can support these video formats:480i,576i,480p,576p,720p,1080i,1080P.
This TV provides one group of AV, one group of YPbPr for convenient connection to VCR, DVD or other
video equipment. Please refer to the owner's manual of the equipment to be connected as well.
You can use the input terminals on TV set rear as follows.
AV EQUIPMENT
Red (audio R)
White(audio L)
Red(Pr or Cr)
R
W
R
Blue(Pb or Cb)
Green(Y)
B
G
Yellow (video)
Y
HDMI2 HDMI3(ARC) USB COAXIAL
MINI YPbPr
COMMON INTERFACE(CI)
HDMI1VIDEO L RVGAHEADPHONE PC AUDIO RFLNB IN
GB R

REMOTE CONTROLLER
-9-
10E
16
17
18
19
21
22
24
25
20
23
APP
STORE
Programme Edit: Delete, Rename, Move, Skip.
EPG: Record, Info, Schedule, Reminder.
No function.
No function.
No function.
Press to turn the TV on or off.(Power)
S.MODE Press to select the sound mode.
P.MODE Press to select the picture mode.
0-9 Press to enter a channel number
or password.
Q.VIEW Press to switch to the last viewed
channel.
Press to open the on-screen menu. In
teletext mode, press to open the INDEX
page.
Press to navigate the on-screen menu.
Press to conrm a selection.
OK
Press to return to the previous screen.
In teletext mode,press to enter mix
mode.
SOURCE Press to open the input source list.
CH Press to change the channel.
Press to display the channel information.
In teletext mode,press to revealthe
hidden information.
Press to open the channel list.In teletext mode,
press to switch the image to top,bottom or full.
Press to close the on-screen menu.In teletext
mode,press to hide the text.
Press to stop multimedia playback, REC& Timeshift
mode.
GUIDE Press to display electronic programme guide
in TV mode. Press to enter the teletext subpage.
(REC) Press to record the TV program you are watching
in DTV mode.
(Mute) Press to turn the sound on or off.
TOOL Press to open the shortcut menu of tool.
VOL +/- Press to adjust the volume level.
APP
Press to open a favorite channel list. In teletext
mode, press to hold a page.
(reverse) Press to reverse playback in multimedia.
Press to play in multimedia mode & Timeshift mode.
(Play)
(forward) Press to fast forward in multimedia.
Press to pause in multimedia mode & Timeshift
mode.
(Pause)
Insert Batteries into the Remote Control
1. Remove the battery cover.
2. Inserting the 2 AAA 1.5V batteries making sure the polarity
(+ or -) of the batteries matches the polarity marks inside the unit.
3. Mount the battery cover. Replace with new batteries when the
TV set begins to show the following symptoms:Operation is
unsteady or erratic. Sometimes the TV set does not function
with Remote Control Unit.
Remark:
1) Alkaline Battery Recommeded.
2) Remove batteries when they are exhausted or if the remote
control is not to be used for long time.
Coloured
buttons
APP STORE

-10-
TV OPERATION AND SYSTEM SETUP
Press SOURCE button to display the input source list;
Press button to select the input source you want to watch;
▲ ▼
/
Press OK button to enter the input source;
TV OPERATION
Press MENU button to display the MAIN OSD MENU;
Press button to select the MENU you want;
▲/▼
Press OK button or ► button to enter the sub menu, and
press ◄ button to return back to the previous menu.
Press button to select the option and then press OK
▲/▼
button or ► button to enter the sub-menu, press ◄/► button
to adjust the value or press ◄/► button to select in the sub
menu;
You can press MENU button to save and return back to the
previous menu, and press EXIT button to exit the entire menu.
Press INFO button on the remote control to display program
information.
1.Current program Number.
2.The NICAM mode of current program.
3.The sound system of current channel could be changed on
Analog Manual Search Menu.
1. Picture Menu
The picture is for a reference only; the actual item is the
standard.
Press MENU button to display the main menu.
Press button to select Picture in the main menu, and
▲/▼
then press OK button to enter.
1.Press button to select the option that you want to
▲/▼
adjust in the Picture menu, and then press OK button or ►
button to enter.
2.Press ◄/► button to adjust or press button to select.
▲/▼
And press OK button to select the sub menu.
3.After finishing your adjustment, press MENU button to save
and return back to the previous menu, and press EXIT button
to exit the entire menu.
1.1 Picture Mode
Press button to select Picture Mode, then press OK
▲/▼
button to enter and press button to select. (Available
▲/▼
Picture Mode: User, Dynamic, Standard, Mild)
You only can change the value of brightness, contrast,
sharpness, color, when the picture is in User mode.
TIPS: You can press P-MODE button on the remoter control
again and again to change the picture mode directly.
1.2 Brightness
Press button to select Brightness, then press OK button
▲/▼
to enter and press ◄/► button to adjust. Then press MENU
button to return back the previous menu directly.
1.3 Contrast
Press button to select Contrast, then press OK button to
▲/▼
enter and press ◄/► button to adjust. Then press MENU
button to return back the previous menu directly.
1.4 Sharpness
Press button to select Sharpness, then press OK button
▲/▼
to enter and press ◄/► button to adjust. Then press MENU
button to return back the previous menu directly.
1.5 Colour
Press button to select Colour, then press OK button to
▲/▼
enter and press ◄/► button to adjust. Then press OK button
to return back the previous menu directly.
1.6 Tint
Press button to select Tint, then press OK button to enter
▲/▼
and press ◄/► button to adjust. Then press MENU button to
return back the previous menu directly.
1.7 Colour Temperature
Press button to select Colour Temperature, then press
▲/▼
OK button to enter and ◄/► button to select Standard, Cool,
Warm.

-11-
TV OPERATION
1.8 Aspect Ratio
Press button to select Aspect Ratio, then press OK
▲/▼
button to enter and ◄/► button to select Auto,4:3,16:9,Full,
Zoom1,Zoom2,Cinema,Just Scan.
1.9 Noise Reduction
Press button to select Noise Reduction, then press OK
▲/▼
button to enter and ◄/► button to select Off,Low,Middle,High.
2. SOUND Menu
The picture is for a reference only; the actual item is the
standard.
Press MENU button to display the main menu.
Press button to select Sound in the main menu, and
▲/▼
then press OK button or ► button to enter.
1.Press button to select the option that you want to
▲/▼
adjust in the Sound menu, then press OK button to enter.
2.press ◄/► button to adjust or press to select, and
▲/▼
press OK button to select submenu.
3.After finishing your adjustment, Press MENU button to
save and return back to the previous menu, or press EXIT
button to exit the entire menu.
2.1 Sound mode
Press button to select Sound mode, and then press OK
▲/▼
button to enter. And then press ◄/► button to select.
(Available Sound mode: User, Standard, Music, Movie).
You can change the value of bass and treble, Balance and
EQ, when the sound is in User mode.
TIPS: You can press S-MODE button on the remote control
to change the Sound Mode directly.
2.2 Bass
Press button to select Bass, then press OK or ► button
▲/▼
to enter and press ◄/► button to adjust. It can only be
adjusted under user mode.Then press MENU button to return
back the previous menu directly.
2.3 Treble
Press button to select Treble, then press OK button to
▲/▼
enter and press ◄/► button to adjust. It can only be adjusted
under user mode Then press MENU button to return back the
previous menu directly.
2.4 Balance
Press button to select Balance, then press OK button to
▲/▼
enter and press ◄/► button to adjust. Then press MENU
button to return back the previous menu directly.
2.5 Surround
Press button to select Surround, and then press OK b
▲/▼
utton to enter and press ◄/►button to select ON or OFF.
2.6 AVL
Press button to select AVL, and then press OK button to
▲/▼
enter and press ◄/►button to select ON or OFF.
2.7 SPDIF
Press button to select SPDIF, and then press OK button
▲/▼
to enter and press ◄/►button to select Off,PCM,Auto,Multi.
2.8 Audio Description
Press button to select Audio Description, and then press
▲/▼
OK button to enter and press ►button to enter the sub-menu.
3. Channel
The picture is for a reference only; the actual item is the standard.
Press MENU button to display the main menu.
Press button to select Channel in the main menu, and
▲/▼
then press OK button to enter.
1. Press button to select the option that you want to
▲/▼
adjust in the CHANNEL menu, and then press OK button to
enter.
2. Press ◄/► button to select and press OK button to select
the sub menu.
3. After finishing your adjustment, press MENU button to
save and return back to the previous menu, or press EXIT
button to exit the entire menu.
3.1 Channel Management
Press button to select Channel Management, and then
▲/▼
press OK button to rename the channel selected. The menu
will appear as follows:
LCN On/Off

TV OPERATION
-12-
Key Description:
RED button: Press this button to set the favorite channel to
“Favorite 1” .
GREEN button: Press this button to set the favorite channel
to “Favorite 2”.
YELLOW button: Press this button to set the favorite channel
to “Favorite 3”.
BLUE button: Press this button to set the favorite channel to
“Favorite 4”.
3.3 TV Connection
Press button to select TV Connection, and then press
▲/▼
OK button to select which the TV connect type you use.
3.4 Auto Tuning
Press button to select Auto Tuning, and then press OK
▲/▼
button to enter
(When the System Lock is on, please input the PIN code to
unlock).
3.5 DTV Manual Search
Press button to select DTV Manual Search, and then
▲/▼
press OK button to start the scan.
(When the System Lock is on, please input the PIN code to
unlock).
3.6 ATV Manual Search
Press button to select ATV Manual Search, and then
▲/▼
press OK button to start the scan the ATV channels.
3.7 LCN On/Off
Press button to select LCN On/Off, and then press OK
▲/▼
button to set LCN to on or off.
Key Description:
CH button: Press CH+ or CH- to turn the page.
RED button: Press this button to to delete the channel selected.
GREEN button: Press this button to lock the channel.
YELLOW button: Press this button to skip the channel.
BLUE button: Press this button to move the channel.
3.2 Favorite Management
Press button to select Favorite Management, and then
▲/▼
press OK button to the Favorite Management menu. The menu
will appear as follows:
3.9 EPG
Press GUIDE button to open EPG menu, and then press
GREEN button to set a timer.
Press RED button to switch daily mode and weekly mode.
Press YELLOW button to switch to previous day.
Press BLUE button to switch to next day.
3 8 Satellite System
. 
Press button to select Satellite System, and then press
▲/▼
OK button to the Satellite System menu. The menu will
appear as follows:
Key Description:
RED button: Press this button to delete the Transponder .
GREEN button: Press this button to edit the Transponder.
YELLOW button: Press this button to add the Transponder.
BLUE button: Press this button to scan the DVBS channel.

TV OPERATION
-13-
4.1.1 Lock Channel
Press button to select Lock Channel, then press OK or
▲/▼
► button to select ON or OFF.
4.1.2 Parental Guidance
Press button to select Parental Guidance, then press OK
▲/▼
or ► button to enter the sub menu. Then press button
▲/▼
to select Rate (From4-17, or None). Then press OK or ►
button to confirm.
4.1.3 Change Pin Code
Press button to select Change Pin Code, then press OK
▲/▼
to enter and Change Pin Code menu will appear as follows:
No Lock
No Lock
Adult
PG18
PG13
Genearl
1.Press button to select the option that you want to
▲/▼
adjust in the Feature menu, then press OK to enter.
2.Press ◄/►button to adjust or press button to select.
▲/▼
3.After finishing your adjustment, press MENU button to save
and return back to the previous menu and press EXIT button
to exit the entire menu.
4.1 Lock
Press button to select Lock, then press OK button to
▲/▼
enter the sub menu with the password “0000”:
Input old password at “Old Password”, (if the old password
is incorrect, the password will not be allowed to modify.)
Input new password at “New Password”.
Input new password again at “Confirm New Password”, if
new password and confirm new password consistent, the
successfully updated menu will appear a few second,
otherwise, the menu will display the password mismatch.
4.2 Language
Press button to select Language, then press OK or ►
▲/▼
button to enter the sub menu, then press button to select,
▲/▼
then press OK or ► button to confirm.
4.3 Sleep Timer
Press button to select Sleep Timer, then press OK button
▲/▼
to enter and press button to select off,10mins,20mins,
▲/▼
30mins,60mins,90mins,120mins,180mins,240mins.
4. Feature
The picture is for a reference only; the actual item is the
standard.
Press MENU button to display the main menu.
Press button to select Feature in the main menu, and
▲/▼
then press OKor ► to enter.

TV OPERATION
-14-
4.7.3 TimeShift Buffer
Press button to select TimeShift Buffer,Press OK or ►
▲/▼
button to open the sub-menu hen Press to select Auto,
▲/▼
30 Mins,1hr,2hr.
4.7.4 Timer
Press button to select Timer,Press OK or ► button to
▲/▼
open the sub-menu.
Note: you can also open Timer menu by key REC.TASK
Press button to select Timer, and then press OK button
▲/▼
to display the sub menu, and then press YELLOW button to
set an appointment record. As follower:
Press number keys and direction keys, user can set the channel,
date, start time, mode, type and record length information on
this menu.
When approaching the preset time, the screen will be appear a
countdown to remind the user menu.
4.7.5 Record List
Press button to select Record List,Press ok or ► button
▲/▼
to open the sub-menu.
Note: you can also open Timer menu by key REC.File
4.4 Auto Power Off
Press button to select Auto Power Off, then press OK to
▲/▼
enter the sub menu, Then Press to select off,1 hour ,2
▲/▼
hours,4 hours then press OK to confirm. (When the PC signal
is connected).
4.5 Hearing Impaired
Press button to select Hearing Impaired, then press OK
▲/▼
button to enter and press button to select off or on.
▲/▼
4.6 CI Info
Press button to select CI info, then press OK button to
▲/▼
display the CI slot Information.
Press button to select different disk on in Partition
▲/▼
Select menu
Press RED button to format the disk you selected.
Press GREEN button to set the disk you selected to default
partition.
4.7.2 Auto TimeShift
Press button to select Auto TimeShift,Press OK or ►
▲/▼
button to open the sub-menu hen Press to select on/off.
▲/▼
4.7 PVR/TimeShift
Press button to select PVR/TimeShift, then press OK
▲/▼
button to open the sub-menu. As follows:s
1.Press button to select the option that you want to
▲/▼
adjust in the PVR/TimeShift menu, then press OK or ►
button to enter.
2.After finishing your adjustment, press MENU button to
save and return back to the previous menu and press EXIT
button to exit the entire menu.
4.7.1 Partition Select
Press button to select Partition Select, then press OK
▲/▼
button to open the sub-menu. As follows:

TV OPERATION
-15-
1.Press button to select the option that you want to
▲/▼
adjust in the Setup menu, then press OK or ► button to enter.
2.Press ◄/►button to adjust or press button to select.
▲/▼
3.After finishing your adjustment, press MENU button to
save and return back to the previous menu and press EXIT
button to exit the entire menu.
5.1 OSD Timer
Press button to select OSD Timer, and then Press OK
▲/▼
or ►button to select. (Available OSD Timer: 5S,10 S, 15S,
20S, 25S,30S, never), then press OK button to confirm.
5.2 Auto Scart
Press button to select Auto Scart, and then Press OK
▲/▼
or ► button to select on or off .
5.3 PC Setup
Press button to select PC Setup, then press OK or ►
▲/▼
to enter sub-menu.
5.4 Blue Screen
Press button to select Blue Screen, and then Press OK
▲/▼
or ►button to select on or off.
5.5 Home Mode
Press button to select Home Mode, and then Press
▲/▼
◄/►button to select Home or Store, then press OK button
to confirm.
5.6 Reset TV Setting
Press button to select Reset TV Setting, and then Press
▲/▼
then press OK button to enter the sub menu, enter the
password if locked, and then you can quickly make some basic
settings of the TV. As follows:
5.6.1 Home Mode
User can press button to select the home mode of
▲/▼
television programs.
5.6.2 Country
User can press button to select the country.
▲/▼
And then press ENTER to enter the next step page.
Press to select record program file(.ts file).
▲/▼
Press OK to play.
Press red button to delete the selected file.
If press OK to play, the menu will appear as follows:
4.7.6 Recorder Start
Press button to select Recorder Start,Press ok or ►
▲/▼
button to enter directly record .
Note: you can also open Timer menu by key ●
4.8 HDMI Link
Press button to select HDMI Link,Press ok or ► button
▲/▼
to enter sub-menu .
4.8.1 Enable HDMILink
Press button to select Enable HDMILink ,Press ok or
▲/▼
► button to select on/off.
If you want to set the item in HDMILink menu,you must set
Enable HDMIlink to on.
4.8.2 Auto PowerOn
Press button to select Auto PowerOn ,Press ok or ►
▲/▼
button to select on/off.
4.8.3 Auto Standby
Press button to select Auto Standby ,Press ok or ►
▲/▼
button to select on/off.
4.8.4 Speaker Preference
Press button to select Auto Standby ,Press ok or ►
▲/▼
button to select TV Speakers,Amplifier.
Note:This item can only be selected when cec device is
detected.
4.8.5 Amplifier Support ARC
Press button to select Amplifier Support ARC ,Press
▲/▼
ok or ► button to select on/off.
Note:This item can only be selected when Amplifier device
is detected.
5. Setup
The picture is for a reference only; the actual item is the
standard.
Press MENU button to display the main menu.
Press button to select Setup in the main menu, then
▲/▼
press OK to enter.

TV OPERATION
-16-
5.6.7 Version
Press button to select Version, and then press OK to
▲/▼
enter the sub menu, you can check the software version this TV.
6 How to user Record
The HK-T.S2512C support two type to record :
A Direct Record
、
B Subscribe Record
、
Direct Record
1. In the DTV source, you can start record function by press
the “REC” key while program playing. Before that, you have
to make sure the USB storage device is inserted and the device
checking and Initialization is done.
If you press “REC” key when there's no USB storage device
inserted, the prompt window will appear as follow.
If you press “REC” key during the device checking and
Initialization, the prompt window will show black screen
about 2s.when the TV is recording, it will appear the
recording menu.
2.After record started, you can press the button of
PLAY/PAUSE on the RC to set the play mode. You can seen
the detail info by the record menu.
3.Press the Button on the remote to set rec duration time
●
when rec is running. As follows:
5.6.3 Language
User can press button to select the language.
▲/▼
And then press ENTER to enter the next step page.
5.6.4 Auto Power Of
User can press button to select the Auto power off time:
▲/▼
off,1Hour,2Hours,4Hours.
And then press ENTER to enter the next step page.
5.6.5 TV Connection
Press button to select the item of TV Connection.
▲/▼
And then press ENTER to enter the next step page.
5.6.6 Auto Search
Press button to select the turning mode, and then press
▲/▼
◄/► button to enter auto search process.
User can press MENU button to skip the scan and press EXIT
button to exit the scan

TV OPERATION
-17-
1.When the record task time is start, It will auto record, but
you must check you USB storage
device inserted and it is enough speed to record. Otherwise
the task will failure.
2.The TV enter false standby mode when the task is start, you
can press the POWER button
to watch the TV program. You can do same operation as Direct
Record. When you press POWER again, if the task is not over,
the TV will power off the panel and continue to record. The
TV will real power off until the record task is over.
3.When you press the button, you can enter the REC.TASK
timer menu too.
7. How to user Time shift
1. In the DTV source, you can start timeshift function by press
the T.SHIFT button while program playing. Before that, you
have to make sure the USB storage device is inserted and the
device checking and Initialization is done.
If you press T.SHIFT button when there's no USB storage
device inserted, the prompt window will appear as follow.
If you press T.SHIFT button during the device checking and
Initialization, the prompt window will appear as follow.
2. After record started, you can press the button of
PLAY/PAUSE to set play mode, and you can seen the detail
info by the time shift menu.
3. You can press STOP button to jump to the real time
broadcast of the program, and press STOP key again to stop
time shift function after confirm.
8. Hotel Mode
1. How to enter and exit the hotel mode menu:
Enter: You can enter the hotel mode menu by the follow steps:
Press password "1001" under the menu.
Select: use direction key to select the different items.
confirm: Press the key “ENTER” or right direction key to
confirm.
4. You can press "STOP" key to stop record function after
confirm.
Note: Time shift function will stop when there's no space left
on the USB storage device.
Subscribe Record
1.In the DTV source, you can enter the Timer menu set the
Subscribe Record. Press the YELLOW button to add the

record task.
The Way: Main menu--->Feature-->PVR/TimeShift-->Timer
2.If you enter the Timer Edit menu, you can set the record
task that you want to record.
3.When you success to set the record task, if the TV is standby
mode, it will auto power on when one minutes before the
start of the task.

TV OPERATION
-18-
9.1 Photo
The picture is for a reference only; the actual item is the standard.
Press ◄/►button to select Photo in the main menu, and then
press OK button to enter.
Press EXIT button to return back to the previous menu.
Press to select the photos, press OK or button to
▲/▼
view.
Press RED button to delete the photo you selected.
Press GREEN button to add all photos to play list.
You can see the information of the current playing photo after
press INFO button, then press button to play or pause,
you can see the playing state in the right.
Then press or ◄/► button to rotate the picture without
▲/▼
control bar.
Notes: Other menu and description are the same as that for
Movie menu.
9.2 Music
The picture is for a reference only; the actual item is the
standard.
Press ◄/►button to select in the main menu, and then Music
press OK button to enter.
Press button to return back to the previous menu.EXIT
Press button to delete the song you selected.RED
Press button to add all music to play list.GREEN
Press button to select the song you want to listen, and
▲/▼
then press or or ► button to play.OK
2.Function description of hotel mode:
Name Value Description Note
Hotel Lock On Off
/Open or close hotem
mode，set to off by
default.
If want to adjust the items in
Hotel Menu you
,must set
this item to
“ON”
Channel Lock On Off
/Lock the channel menu.If set to ON user
,can not
enter the channel menu and
can not search channel.
Picure Lock On Off
/Lock the picture menu If set to ON user
,can not
enter the picture menu and
can not adjust the picture
mode contrast brightness
, , ，
and so on.
Sound Lock On Off
/Lock the sound menu If set to on ,user can not
enter the sound menu and
,
can not adjust the item likes
sound mode balance and
, , so
on.
Feature Lock On Off
/Lock the feature menu If set to on,user can not
enter the feature menu.
Setup Lock On Off
/Lock the setup menu If set to on,user can not
enter setup menu and
,
change the system settings.
Source Lock Lock the input source.Press key
“enter”
to enter
the submenu If
.set one
source lock to
“ON”
，user
can not enter that source.
Set Source Off ATV A
/ /
V…
The default source
when power on to
enter.
If select a source except the
“
Off”,the tv will enter that
source when power on
every time
Channel
Nummber
On Off
/The default ATV
channel to enter when
power on.
Max Volume 0 100
/../ The max volume for
user to adjust
If change this value ,user
can not set the volume out
of this limitation.
Default
Volume
0 max
/../
volume
The default system
volume when power on
The Default Volume can not
out of the limit of Max
volume.
Next Page Turn to next page
Clear lock Reset the hotel mode
DataBase
Export
Export the channel
data.
DataBase
Import
Import the channel
data.
Previous page Turn to previous page
9. MEDIA OPERATION
The picture is for a reference only; the actual item is the standard.
Note: Before operation MEDIA menu, Plug in USB device
or memory card, then press SOURCE button to set the Source to
Media.
Press button to select MEDIA in the Source Menu, and
▲ ▼/
then press OK to enter. You can also enter the Media by pressing
MEDIA button on the remote control.
1.Press ◄/► button to select the option that you want to adjust
in the Media menu, then press OK or ► button to enter.
2.Press ◄/►button to adjust or press button to select.
▲ ▼/
3.After finishing your adjustment, press MENU button to save
and return back to the previous menu and press EXIT button to
exit the entire menu.

TV OPERATION
-19-
Press button to select the file you want to view.
▲/▼
Press OK button to select the sub folder for file.
Press RED button to delete the text file you selected.
Press GREEN button to add all text files to play list.
Press ENTER button or button to play,
Press button or EXIT button to stop playing.
■
Press the button to return back to previous page.
You can see the information of the current playing media at
the first flew second or after press INFO button.
Press RED button to add/delete bookmark in current page.
Press GREEN button to jump to special page.
Press Yellow button to open bookmark list.
10. Operation instructions of Miracast
1.Select the Miracast source or USB source and enter
2.Then you will see the Miracast icon.
3.Enter the Miracast, wait for serival seconds you will see the
Miracast Ready.
Press button to return back to the previous menu.
You can see the information of the current playing song at the
left of the menu.
9.3 Movie
The picture is for a reference only; the actual item is the
standard.
Press ◄/►button to select Movie in the main menu, then press
OK button to enter.
Press EXIT button to return back to the previous menu.
Press button to select the folder that you want to view.
▲/▼
Press button to select the sub folder.OK
Press button to delete the movie you selected.RED
Press button to add all movies to play list.GREEN
Press button or button to play,ENTER
Press button or EXIT button to stop playing.
■
Press the button to return back to previous page.
You can see the information of the current playing media at the
first flew second or after press INFO button.
9.4 e-Book
The picture is for a reference only; the actual item is the standard.
Press ◄/►button to select e-Book in the main menu, then press
OK button to enter.
Press EXIT button to return back to the previous menu.
Press Blue button to open play list.
Press Enter button to open quick menu.