Haier L19A11W User manual

Upute za uporabu
.RULVQLþNRXSXWVWYR
6HUYLVQDPMHVWD
-DPVWYHQLOLVW
HR
6HUYLVQDPMesta
*DUDQWQLOLVW
BiH
6HUYLVQDPMHVWD
GarantniOLVW
CG
6HUYLVQDPHVWD
*DUDQWQLOLVW
SR
User 0DQXDO
UPUTE ZA UPORABU
LCD TV PRIJEMNIK
L22A11W
L2211W-A
L19A11 W
L1911W-A
RoHS
2002 / 95 / EC
1DYRGLOD]DXSRUDER
8GKs]LPHSsUVKIU\Ws]LP
ɍɩɚɬɫɬɜɚɡɚɭɩɨɬɪɟɛɚ

L22A11W
L2211W-A
L19A11 W
L1911W-A
User
manual
LCD TV
Receiver
ENG
RoHS
2002 / 95 / EC

To users:
Thank you for using our LCD-TV.
Before connecting the LCD-TV and turning the power on, please
read thisbook carefully.
CONTENT
Safety Notice Items...................................................................................
Front Panel Controls..................................................................................
Connection Options...................................................................................
Remote Control Key Functions...................................................................
Remote Control ..................................................................................
Installing Batteries..................................................................................
Connection Instructions.............................................................................
Grounding..............................................................................................
External equipment Connections..............................................................
Antenna Connection.............................................................................
VGA Input............................................................................................
YPbPr Input..........................................................................................
S-VIDEO Input....................................................................................
SCART Input.......................................................................................
HDMI Input..........................................................................................
Basic Operating Instructions.......................................................................
Turn on the LCD-TV.................................................................................
Audio Control..........................................................................................
Mute......................................................................................................
Select the TV Channel You Want...............................................................
Picture Mode...........................................................................................
Menu Operations.......................................................................................
Picture Menu Options...............................................................................
Picture Menu Options Continued...............................................................
Audio Menu Options................................................................................
Audio Menu Options Continued................................................................
Function Menu Options.............................................................................
Function Menu Options Continued.............................................................
Adjust Menu Options................................................................................
Tuning Menu Options..............................................................................
Tuning Menu Options Continued..............................................................
TELE TEXT...............................................................................................
Troubleshooting Guide...............................................................................
Specifications...........................................................................................
1
2
3
4
5
5
6
6
6
6
7
7
8
9
9
10
10
10
10
11
11
12
12
13
13
14
15
16
17
18
19
20
22
23
Note: HDMI instruction in this manual is just for the special modelswhich have theterminal.
(HDMI terminal isonly available in some models, pleasesee the real)

Safety Notice Items
as required when you are installing,using and cleaning this machine. To insure
your safety and extend thelife-span of LCD-TV, please readthe following items
carefully beforeusing:
Please read and understand all the instructions before operation;
Please keep the book for later use;
Please complywith thewarning instructionson themachine and in thisbook
st rict l y;
Please comply with the instructions provided;
Please do not use additional devices that are not recommended by
manufacturer:
Before operation, please make sure that the operating voltage of your unit is
normal;
Do not placethe unit on unstable, dusty and humid places;
Never put theunit in direct sunlight or near heat sources;
Allow enough space for proper ventilation;
Please keep wat er away from the LCD-TV . If water comes in contact wit h the
LCD-TV,disconnect thepower cordfrom thepower source,then wipethe set
with adry soft cloth;
Personnel
1

2
L22A11W, L2211W-A

COMPONENT Input
Connect a component
video/audio
device to thesejacks
PC Input
Connect to theVGA
15PIN analog output
connector of thePC
display card forPC
display purpose
S- Vi d e o I n p u t
Connect S-Video out
from an S-Video device
to the jacks.
Antenna Input
Connect cableor
antenna signals to
the TV, either direc-
tly or through your
cable box.
Connection Options
Earphone port
COMPONENT/
SVI D EO / VGA
Audio Input
Connect the PC output
connector from aPC to
the audio input port
SCART
Connect to the DVD/
VCR/ broadcast i ng
receiver or other
equipment
ANT IN Y
Pr S-VIDEO TV SCART VGA IN
AUDIOIN Pb HDMI
HDMI
Connect to HDMI
output of other
equipment
ANTIN Y
Pr S-VIDEO TV SCART VGAIN
AUDIO IN Pb HDMI
3

Remote Control Key Functions
When using the remote control, aim it
towards the remotesensor on theTV
Stand By
MUTE
Display current input signal information
TV channel number select
Set time to change the TV into the
standby status after a period of preset
time.
NICAM/A2 Stereo select
EXIT
Quick TV channel switch(return to the
last channel)
Volume down/up Left/right orientation to
adjust the item in the OSD
TV channel up/down or select the item
of the menu
Select PC/COMPONENT/HDMI/TV/SCART/
SVIDEO
Select picture mode
PC system select
Select sound mode
subjects
Switch to the Teletext with text mode/turn
Switch to the Teletext with mix mode
Request index page
Change display size
Sub coded page access
While in normal TV mode only, pressing
the button TIME will display the teletext
time in the top right corner for a few
seconds.(only available in teletext mode)
Reveal or hidden the hidden words
Press to select the main menu
Auto adjust (PC mode)
Buttons on the remote control
P+
P-
V- V+
SLEEP DISPLAY MUTE POWER
NICAM PC AUTO AD TV/AV
PSM
OK Q.VIEW
MENU
INDEX TEXT
TIME HOLD SIZE REVEAL
SUBCODE MIX
SSM
4

Remote Control
Installing Batteries
3
2
1
1.Slide open the cover of thebattery compartment on the back of the remote
control.
2.Load two 5#alkaline batteries in the compartment. (plusand minus polesto
respective mark)
3.Replace the cover of the battery compartment.
Precautions
Make sure that there is no
obstacle between theremote
controller and television set.
As strong light may interfere the
signals, change your position to
operate the remote controller if
the television cannot be turned
Keep the remote controller
away from heat source or
humid area to ensure
the remote controller.
Make sure that two 5# 1.5Valkaline
batteries are loaded. The batteries
must be of the same type. The batteries
must be located properly. The batteries
are not rechargeable.
5

I
Ensure that you connect the grounding / earth wire to prevent possible
electrician install a separate circuit breaker. Do not try to ground the
unit by connecting it to telephone wires, lightening rods, or gaspipes.
ternal ui ent onnections
- An t e n n a or Ca b l e Se r v i c e w i t h a Ca b l e Bo x Co n n e c t i o n s
- For opt imum picture quality, adjust antenna direction if needed.
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
wall antenna
socket
VHF antenna
UHF ant enna
outdoor
antenna
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
Be careful not to bend thebronze
wire when connecting the antenna.
To improve picture quality in apoor
signal area,purchase and install a
If the antenna needsto be split for two
TV s, install a 2-Way Signal Splitter
in the connections.
If the antenna isnot installed properly,
contact your dealer for assistance.
RF coaxial wire (75 ohm) ANT IN
ANT IN
6

Connection Instructions
Youcan use yourLCD-TV as amonitor for yourpersonal computer usinga VGA
cable (not supplied).
VGA Input
Connection anduse steps:
1.Read the user guide supplied with
your computer and ensure that it has
aVGAconnector;
2.Make sure that the power of the LCD
3.Connect a Dtype 15-pin VGAinterface
cable (not supplied ) tothe VGAvideo
interface connector on the PC. Then
connect the other end to the PC video
interface connector on the back of the
LCD-TV.Tighten the screwson the VGA
connected;
and then turn on the power of the PC;
5.Press theTV/AVbutton to set thevideo
input mode of the LCD-TV to PC;
6.Check the image on your TV. There may be noise associated with the resolution,
vert ical pattern, contrast or brightness in PC mode. If noise is present, change
the PCmode to another resolution, change the refresh rate to another rate or
adjust the brightness and contrast on the menu until the picture is clear. If the
refresh rate of the PC graphic card can not be changed,change the PC graphic
card or consult the manufacturer of the PCgraphic card.
VGA IN
Frame frequency (Hz)Line frequency (Khz)
VGA
SVGA
XGA
640*480 31.5KHz 60Hz
800*600 37.9KHz 60Hz
1024*768 48.4KHz 60Hz
Reso l u t i o n
Mode Resolution
No t e: Al l ab o v e li st ed ar e su b j ec t t o VESA Cr i t e r i a.
YPbPr Input
How toconnect
Connect theDVD video outputs (Y, PB, PR)
to the COMPONENT(Y, Pb, Pr) IN jacks on
the TVand connect theDVD audio outputs
to the AUDIO IN jackson the TV,as shown
NOTE: If your DVD player doesnot have
component videooutput,use S-Video.
How touse
1. Turn on the DVD player, insert aDVD.
2. Use the TV/AV button on theremote control to select
7

I
IE I
onnection an use ste s
1.Read the user guide supplied with your AV devices and ensure that it has
S-Video connectors;
and then turn on the power of the AV
device;
4.Press the TV/AV button to set the video
input mode of the LCD-TV to SVIDEO
mode .
Set VCR output switch to 3 or 4 and then
tune TV to the same channel number.
1. Connect the audio and Svideo cables
from the VCR's output jacks to the TV
2. Insert a video tape into the VCR and
press PLAY on the VCR. (Refer to the
VCR owner s manual.)
3
- To avoid picture noise (interference), leave an adequate distance between the
VCR an d TV
.
1
2
COMPONENT (If connected to SVIDEO,select the SVexternal
input source.)
3. Refer to the DVD player'smanual for operating instructions.
I
To get better picture quality, connect aDVD player to the component
input ports as shown below.
YPb Pr
8

Connection Instructions
SCART Input
1.Link the scart terminal of someother equipment,
such asDVD, to the TVSCART input terminal
of thetelevision.
2.Press TV/ AV to select SCARTmode.
3. PressPlay button on external equipment for
program play.
HDMI
HDMI
HDMI Input
How toconnect
Connect the cablesfrom the external equipment's
How touse
1. Select theinput source byusing the TV/AV
butt on on theremote cont rol.
2. Operate thecorresponding external equipment.
Refer to external equipment operating guide.
SCART
External equipment
Note: The audio cable included with theTV should beused when connected with PC/
COM PONEN T/ SVI D EO.
One side connected with theAUDIO IN terminal on theTV and theother side with right and
left track connected with the corresponding terminals of other equipment.
9

I
TT
When the Ebutton on the remote control ispressed
and the LCD-TV isturned on, the indicator light on the front of
the LCD-TV changesfrom red to green. When theLCD-TV is
standby modeand theindicator light turns red.
Note:
The display of the input mode will disappear in about 8
seconds.
You can also turn on the TVfrom standby mode by pressing
the digits(1-9) or P+/- .
Each time you press the Tbutton, PC, COMPONENT,HDMI, TV ,SCART,
SVIDEO, will appear on the screen .
Note:
Thedisplayof theinput modewill disappear in about 8seconds.
1.Press the button to increase the volume. Anumber will appear on
screen indicating the volume level.
2.Press the button to decrease the volume.A number will appear on
screen indicating the volume level.
M
1.Press the MTEbutton to mute the sound temporarily.A mute icon
appears on the screen.
2.Press the MTEbutton again or to restore the sound.
The mut e icon disappears.
P+
P-
V- V+
SLEEP DISPLAY MUTE POWER
NICAM PC AUTO AD TV/AV
PSM .SSM
OK Q.VIEW
MENU
INDEX TEXT
TIME HOLD SIZE REVEAL
SUBCODE MIX
AUTO SEARCH
UNITED KINGDOM
NO
Press V+/- to adjust among countries list on the screen
according to the country you are in, P+/- to select the option and MENU to confirm.
YES
or AUTO SEARCH
NO YES
OTHER
10

Basic OperatingInstructions
Select theTV ChannelYouWant
You can use the number keys on the remote control to directly select TV
channels.
The LCD-TV can store up to 100 channels , and you can press the keys on the
remote control or on the panel to make a selection.
Picture Mode
Press PSM button on the remote control for menu display . For desired mode as
follows:
PERSONAL STANDARD MILD FRESH
1.Press the relevant key on the remote control if you want to choose any channel
from 0to 9. for example: if you want to choose channel 8, just press the key
number 0and 8.
Tochoose channels from0 to 9)
2.If you want t o choose a channel bigger t han 9, pl ease ent er t he t wo digit s of t he
channel number you want to watch within 3 seconds. for example: select
channel 16
11

Menu Operations
Pict ure Menu Opt ions
1. Press MENU button to display the main menu, and V+/ V- to select the
main menu .
2. Press P+ / P- to scroll through the options
3. Press V+/ V- buttons to make changes to the parameters
4. Press the OK button to exit the menu
because it is just an exampleto help youwith the TVoperation.
Picture quality can be adjusted for any input separately .
The picture quality on the screen can be adjusted as follows:
1. Press MENU button andV+/ V- until the following menu appears
on the screen.
2. Press P+ / P- button to enter the picture menu and to go up and down to
select the desired option .
PC MENU
TV/ SVIDEO/ SCART MENU
PICTURE
BRIGHTNESS
CONTRAST
SHARPNESS
COLOUR
NOISE REDUCE
HUE
PICTURE
BRIGHTNESS
CONTRAST
SHARPNESS
COLOUR TEMP.
30
30
30
2
COLD
50
50
2
50
OFF Only available in NTSC system
50
PICTURE
BRI GHTNESS
CONTRAST
SHARPNESS
COLOUR
H.POSITION
V.POSITION
30
30
30
2
30
HDMI/ COMPONENT MENU
0
0
12

M
3.Press button to increase and decrease the level to adjust the
selected option to your preference .
4. Repeat step 2and step 3 until desired picture quality hasbeen achieved .
unction
BRIGHTNESS :Adjust the brightness of the picture . By increasing the level, it
will add more light to dark parts of the picture and by decreasing the level ,it will
add moredark to light partsof thepicture.
CONTRAST :Adjust the contrast of the picture .The image becomes higher as
the number increase.
SHARPNESS : Ad j u st t h e am o u n t of t h e det ai l en h an c em en t , t h e im ag e
sharpness rises as the number increases(By increasing the level, it will show
cleaner and clearer images and by decreasing the level,it will makepicture
smoother).
COLOUR : Press to adjust the colour
NOISE REDUCE:Adjust the quality of the pictureby selecting OFF,LOW,MID,HIGH.
HUE :Adjust the toneof the picture. Appear and be adjusted only under NTSC
mode
COLOUR TEMP. :Press to select thecolour temperature from WARM/NORMAL/
COLD .
H.POSITION :Picture horizontal adjust
V.POSITION: Picture vertical position adjust .
M
M
Sound can beadjusted for any input as follows:
1. Press ME and button until the following menu appearson
the screen
VOLUME
BALANCE
BASS
TREBLE
AUDIO MODE
AVL
AUDIO
50
50
50
50
VOICE
OFF
13

Menu Operations
Audio MenuOptions continued
You can adjust sound options to the levels you prefer.
2. Press P+/P- button to enter the audio menu and to go up and down to
select the desired option .
3.Press V+/V- button to increase and decrease the level to adjust the
selected option to your preference .
4. Repeat step 2 and step 3 until desired sound quality hasbeen achieved ..
Function :
VOLUME :Adjust the volumeof your TV
BALANCE : Adjust the balance of the audio output from left to right . When
indication value of balance increases toward 100 ,sound of the left speaker
becomes weaker . When indication value of balance decreases toward 0,
sound of the right speaker become weaker .
BASS :Adjust the bassof the sound .Can only be adjust under PERSONALmode .
TREBLE :Adjust thetreble of thesound . Can only be adjust under PERSONAL
mode .
AUDIO MODE: Press V+/V- to select among PERSONAL, VOICE, MUSICand
THEATRE.
the same volume of all the channels .
14

M
M
enu anguage election
The menus can be shown on the screen in the selected language.First select
your language.
1.
2. Press button to select LANGUAGE.
3. Press button to select your desired language.
From thispoint on, the on-screen menus will be shown in the language of your
choice.
Press ME and button until the following menu appearson the screen
INPUT SOURCE TV
LANGUAGE ENGLISH
TXT LANGUAGE PAN EUROPEAN
TXT EAST/ WEST EAST
BLUE SCREEN ON
DISPLAYMODE 4:3
RESET
CHILD LOCK
FUNCTION
1. Press ME button and until the following menu appears
on the screen.
2. Press button to enter the function menu and to go up and down to
select the desired option .
3.Press button to increase and decrease the level to adjust the
selected option to your preference .
4. Repeat step 2and step 3 until desired picture quality hasbeen achieved .
Funct ions:
1. INPUTSOURCE :Display current mode. There are
to display.
2. TXTLANGUAGE: To switch theteletext languages.
3. TXT EAST/ WEST: To select EASTor WEST
TV, PC,SVIDEO,
SCART ,COMPONENT, HDMI
Only available forthe special
series
INPUT SOURCE TV
LANGUAGE ENGLISH
TXT LANGUAGE PAN EUROPEAN
TXT EAST/ WEST EAST
BLUE SCREEN ON
DISPLAYMODE 4:3
RESET
CHILD LOCK
FUNCTION
Only available forthe special
series
15

Menu Operations
Function MenuOptions Continued
4.DISPLAYMODE: To select thedisplay mode between 4:3 and FULLSCREEN
5.BLUE SCREEN:To set On, the screen will be in blue screen after 3seconds
if there is no signal.
6. RESET: Press V+ to reset some settingsto the factory default .
7. CHILD LOCK:Press V+ to enter it and the following appears on the screen:
If password is correctly entered, the CHILD LOCKmenu will be entered. If the
password is not correctly entered, you will be required to reenter the password
(The initial password is0000. )
PASSWORD:
- - - -
PASSWORD
CHILD LOCK OFF
CHILD LOCK
PASSWORD:The password can be changed.Press P+/- to select PASSWORD
and V+ to enter. Thescreen will display NEWPW: ----,then enter the new
password and thescreen display CONFIRM PW: ----,if the same password
is entered correctly twice, the old password will be changed.
CHILD LOCK: Pr ess P+/- button to select it. Press V+/-
If lock on mode is set, child lock is inactivated automatically. In such case, buttons
on the television isuseless and only buttons on remote control can be used, if child
lock button(button on the television) ispressed, the screen will display
CHILD LOCK. The child lock mode can be resumed by entering lock set menu,
set child lock on .
16

M
M
1. Press ME and button until the following menu appearson the
screen
ADJUST
AUTO SYNC.
PHASE
CLOCK
H. POSITION
V. POSITION
Note: This menuonly appears inPC mode .
2. Press button to enter the adjust menu and to go up and down to
select the desired option
3.Press button to increase and decrease the level to adjust the
selected option to your preference ..
4. Repeat step 2and step 3 until desired quality has been achieved .
Funct ions:
AUTO SYNC: Isopted for adjustment of picture location frequency and phase
parameters .
50
50
50
50
PHASE :Removes any horizontal distortion and clears or sharpnessthe displayed
charact ers .
CLOCK :Adjust theTFT-LCD to match the PCinput source
H.POSITION :Picture horizontal adjust
V.POSITION: Picture vertical position adjust .
17