Haier HTD1268 User manual

WASHER AND DRYER
Service Manual
Suited model:
HTD1268
MANUAL CODE˖
Washer And Dryer Model:HTD1268 SERIES
SM-HTD1268- 1

1
1.Contents----------------------------------------------------------------------------------------1
2.Product code illumination and series introduction-----------------------------------2
3.Features ---------------------------------------------------------------------------------------3
4.Specification ----------------------------------------------------------------------------------4
5.Safety caution --------------------------------------------------------------------------------6
6.Installation ------------------------------------------------------------------------------------9
7.Net dimension -------------------------------------------------------------------------------11
8.Names of the parts-------------------------------------------------------------------------12
9.Operational Functions----------------------------------------------------------------------13
10.Functions schedule-----------------------------------------------------------------------15
11.Error Display and Trouble shooting---------------------------------------------------16
12.Wiring circuit --------------------------------------------------------------------------------26
13.Back cover-----------------------------------------------------------------------------------27
MANUAL CODE˖
Washer And Dryer Model:HTD1268 SERIES
SM-HTD1268- 1

PRODUCT CODE ILLUMINATION AND SERIES INTRODUCTION
Model code rule description
Model identification˖
HTD12 68
AB
C
A˖Serial code
B˖Max spin speed
C˖silver gray
MANUAL CODE˖
Washer And Dryer Model:HTD1268 SERIES
SM-HTD1268- 1

3
Multi-gear speed controller
According to different costumingˈyou can select corresponding spin speedˈ
from 0 to 1200 rpm.
Unique gasket design featuring no residual water hidden inside.
By the unique gasketˈwashing machine can left no residual water hidden between outer
drum and front board.
Delay time adjustive.
According to different costumingˈyou can select delay timeˈfrom1hto24h.
Apperceive drying degree of laundry automatically, just in time to save energy and
make you more comfortable.
Gradient 30 degree control panel, extra big VFD indication, washing process is clear
at a glance
Custom memory function, more time saving and convenient.
Washer And Dryer Model:LSE-1200 S SERIES

4
5.6002senihcamgnihsaw HTD1268
Last update
1. Product identification
enihcamgnihsaWecnailppafonoitpircseD
Type of appliance(FS = standing, BI = built-in FS
HaierdnarbnworeilppuS
NAEedocrabreilppuS
Commercial Brand / Model
CBTNAEedocrablaicremmoC
2. Key-Features
AssalcycneiciffeygrenE
BssalcecnamrofrepgnihsaW
BssalcycneiciffenipS
°nsmargorP 11
gKyticapaC 6
Spin speed (max./optional) rpm
1200-400
Noise level sound pressure level dB(A) 65
Energy consumption per wash circle kWh 1.14
Water consumption per wash cycle L 54
Annual average energy consumption * kWh 190
Annual average water consumption* L 9600
Residualdampness (spin result) %54%
Spin speed selector switch (steps) rpm
Adjustable thermostat (water temp. adjus
°C
90 -
Drum capacity dry laundry /
kg / l 6 /46
Auto water level adjust (depending on volu
AWL
251nim).xam(emitgnihsaW
Washing temperatures (program-co
°C
30 -90
Certification's (CE / ISO 9001 / ISO 9002) CE / ISO 9001
).lhR(SG/VÜT)QMI/SG/VÜT/SG/EDV(slavorppA
*per average200 wash cycles (EN60456)ðT= COLD
3. Basics data
Unit dimension(H x W x D)
cm
85 x 59,5 x 60
88gkthgiewteN
zH05/~V042-022zH/Vycneuqerf/egatloV
Inputpower / main fuse (intensity) W / A 2100/10
Work top / removable
/
Control M = electromechanical, E= electronic, F= fuzzy
E
Drum S= stainless steel / Z= zinc coated
S
Tub P= Polyprop./ S= stainless steel
S
Door:
aesthetic (R= round,Y= big eye, Q= square)
Y
Diameter
cm 30
Outer door frame S= stainless steel/M= metal / P= plastic
P
Inner doorG= glass / P= plastic
G
3°nstnemtrapmoctnegreteD
Removable compartment for liquid detergent
Delay timer (from-to) h1-24
Self cleaning sudspump
Washer And Dryer Model:HTD1268 SERIES

5
Water inlet hose cold water / hot water
/-
Water drain hose / -support
/
Adjustable feet n° 4
4. Safety systems
Auto door lock ADL 
Motor overheating protection MOP 
No heating without water NHW 
Auto water cool-down (before drain 90°C b
AWC 
Water protection WRP 
Acqua Stop kit -
Child protection 
5. Programs
1) COTTON PREWASH (90°C/60°C/40°C
n° 1
2) COTTON (60°C/40°C/Ć)n° 1
3) SYNTHETIC (40°C/Ć)n° 1
4)WOOL n° 1
5)CASHMERE n° 1
6)HAND WASH n° 1
7)QUICK WASH n° 1
8)SPORT WASH n° 1
9)DUVET n° 1
10)Drain n° 1
11)Spin n° 1
Optional function keys (additional program settings)
-
Program button(with power switch) 
Start / pause 
Baby care 
Economic key/load 
Rinse hold / No Soak 
Delay timer 
speed 
temperature 
Packing dimensions & loadability -
Packing dimensions (H x W x D) cm
89×65×60
Gross weight kg 74
40' Container load pcs -
40' HC load capacity pcs 171
Logistic / recicling information RS
Packing weight kg 6
Packing materials / Recycling symbols REzY
Carton (w
gr 0
Polistyren (w
gr 1000
Polyetylene foil
gr 500
Other packing materials
gr -
Wood (w
kg -
Service -
6. User instruction (languages)
D/F/I/GB/E/P/NL
Max. failure rate (12 Months after sale
%
Washer And Dryer Model:HTD1268 SERIES


6
Precaution
.
The power cable must be replaced
by a qualifed engineer; if not, please
consult the Service Center.
5. Do not use inflammable detergents or
dry-cleaning agents. Do not use inflammable
spray containers in close vicinity to the
washing machine. In the event of gas leaks,
remove the washing machine plug and do not
connect.
6. The door of the washing machine will
become very hot during the water-heating
process. Avoid contact with the door during
the heating process. For safety, keep children
away from the washing machine.
7. Do not allow children
p
la
y
with the
p
ackin
g
materials after un
p
ackin
g
.
Washer And Dryer Model:HTD1268 SERIES

7
ƽ 8VH
8. The washing machine must not be installed
outside or in a very humid areaas drops of
water may form on electricalcomponents,
If drops of water have splashed on the
warming on the washing machine,leave it
dry before use.
10. Keep away from heat sources and di-
rect sunlight to prevent plastic and rubber
components from aging.
2. Keep the door slightly open when the
washing machine is not being used. Never
cover the machine with a plastic sheet.
1. Before starting the wash programme,
ensure that the washing machine is
correctly connected to the water supply. In
the event of water leakage, turn off the
water supply and reconnect, or call the
Service Center.
precaution
Washer And Dryer Model:HTD1268 SERIES

8
3.Do not place heavy objects or container
with water on the washing machine,so as to
prevent deformation of the flat surface and
plastic parts.
4. Do not wash articles containing
polystyrene or similar elastic materials.
5. Before washing, do up zippers and ensure
that buttons are securely fastened. Place
small items, such as socks,belts,etc. in a
small washing bag or a pillow-case . To
protect the washing machine, do not wash
garments containing wire parts.
7. The door is fitted with a self-lock device
and can not be opened until 2-3 minutes
after the end of the programme.You are not
recommended not to force the door open
before the programme end. Do not open the
door if the water level is above the lower
part of the door.
8. At the end of the wash cycle, turn off the
water supply to prevent water leakage, un-
plug the washing machine and thoroughly
clean the trim so as not to dirty the laundry
in the next wash cycle.
Precaution
6.Do not open the detergent drawing
during the wash cycle.
9.For appliances with type Y attachment,the
intructions shall contain the substance of the
following.
If the supply cord is damaged,it must be
replaced by the manufacturer,its service
agent or similarly qualifled persons in order
to avoid a hazard.
10.The installation instructions shall state
that the appliance is to be connected to the
water mains using new hose-sets and that
the old should not be used.
For washing machines with ventilation
openings in the base,that a carpet must not
obstruct the openings.
Washer And Dryer Model:HTD1268 SERIES

9
ƽ
Remove all the packing materials (including the
EPS base)to prevent vibration during use, as
shown in the right picture.Upon opening of the
package, water drops may be seen on the plastic
bag and the porthole. This is normal phenomenon
resulting from water test in the factory.
Fig .1
ƽ
Check attachments and materials with reference to the following
ƽ
Dismantle the packing bolts as shown in Fig. 2.
The packing bolts are designed for clamping anti-vibration components
inside of the washing machine during the transportation process.
Before use:
1. Remove the back plate;
2. Remove the three packing bolts on the back plate and take out the
rubber hose;
3. Replace the back plate;
4. Fill the holes left by the packing bolts with plastic plugs.
(Attention: The packing bolts and rubber hose should be kept in a safe
place for later use)
Fig.3
ƽ
Adjusting the washing machine
There are adjustable feet under the bottom of the washing machine. Before
use, the washing machine should be adjusted, as shown in Fig. 3, so that it
is level.
Fig.2
Model
Qty Name
Operation
manual
Operation
manual
Quality
certificate
Quality certificate
Water
hose
Water hose
Drainage
holder
Drainage holder
Plastic
plugs
Plastic plugs
Installation
1
12 11
3
Warrantly
card
Warrantly card
HTD1268
Washer And Dryer Model:HTD1268 SERIES