Haier HNS1460TVE User manual

FRONT LOAD WASHING MACHINE
Service Manual
Suited model:
Features
300mm diameter porthole, door may be open at a 180 degrees.
Class-A energy-saving; Homocentric tubs with higher energy efficiency
Multi-gear speed controller
Unique gasket design featuring no residual water hidden inside
Delay time adjustive
Large wash load capacity 6kg,Europe standard AAB
Serial Number:
SM-HNS1460TVE 01
Version: 1.00 Edition: 2008-04
HNS1460TVE
HNS1460TVEME
Front Load Washing Machine Model:HNS1460TVE/ME

Page 1
1. Contents----------------------------------------------------------------------------------------1
2. Product code illumination and series introduction-----------------------------------2
3. Features ---------------------------------------------------------------------------------------3
4. Specification ----------------------------------------------------------------------------------4
5. Safety --------------------- ---------------------------------------------------------------------6
6. Installation ------------------------------------------------------------------------------------9
7. Net dimension -------------------------------------------------------------------------------11
8. Names of the parts-------------------------------------------------------------------------12
9. Operational functions----------------------------------------------------------------------13
10. Program description table -------------------------------------------------------------15
11. Error display and troubleshooting----------------------------------------------------16
12. Wiring circuit ------------------------------------------------------------------------------24
Front Load Washing Machine Model:HNS1460TVE/ME

Page 2
PRODUCT INTRODUCTION
It represents HNS series appearance with big window 180 opening window 1400rpm
spin speed.Spin speed is adjustive from 400 to 1400 rpm,and alse exclude spin(indicate"0")
temprature is also adjustive,you can it's controlled by computer.
alse choose cold water.
Front Load Washing Machine Model:HNS1460TVE/ME

Page 3
FEATURES
300mm diameter porthole, door may be open at a 180 degrees.
Facilitate view of wash process, facilitate unloading and easy to use with large porthole.
Multi-gear speed controller
According to different costuming you can slect corresponding spin speed from 400 to 1400 rpm.
Unique gasket design featuring no residual water hidden inside.
By the unique gasket washing machine can left no residual water hidden between outer drum and
board.
Front Load Washing Machine Model:HNS1460TVE/ME

Page
SPECIFICATION
Proposal 2007 New Sensor
Front load washing machines
Brand position center upper frame of door / chromed sticker
Model number serigraphy right top corner control panel
On white: silver / On silver : black or dark grey
1. Product identification
Description of appliance Washing machine
Type of appliance (FS = standing, BI = built-in) FS
Supplier own brand Haier
Supplier bar code EAN
Mares computer code
Commercial Brand / Model
Commercial bar code EAN
2. Key-Features
Energy efficiency class A
Washing performance class A
Spin efficiency class B
Programs n° 11
Capacity Kg Max. 6
Spin speed (max. / optional) rpm 1400-0
Noise level dB(A) 71
Energy consumption per wash circle * kWh 0.95
Water consumption* l <49
Residual dampness (spin result) %56%
Spin speed selector switch (steps) rpm 1400/1200/1000/800/600/400/0
Spin speed variator (stepless) rpm
Adjustable thermostat (water temp. adjust from -
to)°C 90 -
Drum capacity dry laundry / water kg / l 6/49
Auto water level adjust (depending on volume of filled in laundry) AWL
Washing time (max.) min 178(TBC)
Washing temperatures (program-controlled) °C 30/40 / 60 / 90
Certification's (CE / ISO 9001 / ISO 9002) CE / ISO 9001
Approvals (VDE/GS / TÜV/GS / IMQ) TÜV/GS (Rhl.)
*EN60456(60°C cycle, full load without pre-wash)  =
COLD
3. Basics data
Unit dimensions (H x W x D) cm 85 x 59.5x 56.5
Net weight kg 70
Voltage/frequency V/Hz 220-240V~50Hz
Input power / main fuse (intensity) W/A 2000/10
Work top / removable /
Control M = electromechanical, E= electronic,
F= fuzzy E
Drum S= stainless steel / Z= zinc coated S
Tub P= Polyprop./ S= stainless steel P
Door:
aesthetic (R= round, Y= big eye, Q=
square) R
Diameter cm 30
Outer door frame S= stainless steel / M
=metal/P= plastic P
Inner door G= glass / P=
plastic G
Detergent compartments n° 3
Removable compartment for liquid detergent -
Front Load Washing Machine Model:HNS1460TVE/ME

Front Load Washing Machine Model:HNS1460TVE/ME

Page 6
Matters Needing Attention
.A separate earthed socket is required for the
power supply. The washing machine must be
positioned so that the plug is accessible.
2. Hold the plug and not the electric cable
when unplugging the washing machine.
3.Fuses in the power circuit should be rated for 15A.
If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
4. Do not touch or use the washing machine bare-
footed or when the hands or feet are wet.
5.Do not use flammable detergent or dry clean
ing agent; do not use flammable spray in
close vicinity to the washing machine; do not
remove or insert the plug in the presence of
flammable gas.
6. The door of the washing machine will become hot
during the heating process. Avoid contact with the
door during the heating process. For safety, keep
children away from the washing machine.
1
Front Load Washing Machine Model:HNS1460TVE/ME

Page 7
9.The carpet must not obstruct the ventilation
openings in the base of the washing machine.
8.Thewashing machine should not be install-
ed outdoors or in a damp place. In the
event of water leakage or splashes allow
the machine to dry naturally.
10.Keep away from heat sources and direct sun-
light to prevent plastic and rubber components
from aging.
11.During installation, ensure that the electric
cable is not trapped by the washing machine
and avoid damage to the electric cable.
During Use
1. Before use, check the joints of the filling hose, the
tap and the drainage hose for possible problems
from water pressure fluctuations. If joints are loose
or there is leakage, turn off the tap and repair. Do
not use the washing machine until the hoses are
properly fixed.
Keep the door slightly open when the washing
machine is not in use to prevent formation of
odors; do not cover the washing machine with
plastic cover so that inside dampness cannot
be kept in.
Matters Needing Attention
2.
Front Load Washing Machine Model:HNS1460TVE/ME

Page 8
3. Do not place heavy, heating source or wet
articles on the top of the washing machine.
4. Do not hot wash foam rubber or sponge-like
materials.
6. Do not open the detergent distribution drawer
during the wash cycle..
7. The door is fitted with a self-lock device and will not open until
2~3 minutes after the washing machine stops. Do not force
the door open. Do not open the door if water level can reach
the porthole.
8.After each wash program, turn off the tap to
prevent leakage; and unplug the washing
machine and wipe clean the lower part of
the porthole.
Steel wires in bras will pop
out during washing; never
wash bras containing steel
wires.
5. Before washing, do up zippers, buttons and
clothes straps and put small articles, such as
socks, laces or bras, into a washing bag or a
pillow.
Matters Needing Attention
Front Load Washing Machine Model:HNS1460TVE/ME

Page 9
Fi g .1
Dismantle the packing bolts as shown in Fig. 2.
The packing bolts are designed for clamping anti-vibration components
inside of the washing machine during the transportation process.
Beforeuse:
1. Remove the back plate;
2. Remove the three packing bolts on the back plate and take out the
rubber hose;
3. Replace the back plate;
4. Fill the holes left by the packing bolts with plastic plugs.
(Attention: The packing bolts and rubber hose should be kept in a safe
place for later use)
Fig.3
Adjusting the washing machine
There are adjustable feet under the bottom of the washing machine.
Before use, the washing machine should be adjusted, as shown in
Fig. 3, so that it is level.
Fig.2
Installation
Front Load Washing Machine Model:HNS1460TVE/ME

Page 10
The height of the drainage outlet must be 80-100cm. To prevent the drainage hose from dropping off,
fix it to the drainage hose clip at the back of the washing machine.
Before connecting to the power supply, check:
Joining the Inlet Hose to the Washing Machine
Connect of water inlet valve
Connect the nut on the inlet hose to the connector on the water valve.
Installation
Use the drainage holder to keep the end of the drainage hose retained and to prevent the outflow
of water. It is recommended that drainage hose extensions not be used; if an extension is needed,
please consult a serviceman. The additional hose should be no more than 250cm (overextended
hoses could lead to siphonage). Note: The drainage hose should not be submerged in water and
should be securely fixed and leak-free.The appliance is to be connected to the waster mains using
new hose-sets and that old hose-sets should not be reused.
Connecting to the Power Supply
The socket is adequate for the maximum power of the washing machine (For safety, fuses in the power circuit should be rated
for no less than 15A).
The power outlet should be capable of accepting the washing machine plug. The washing machine must be earthed before
use.
Supplementary earth cable should not be necessary if the socket is connected to the earth
Supplementary earth cable shoulde be installed on the upper back of the washing machine andconnected to an earth if the
power supply socket has no earth connection
The voltage should meet the requirement.
Front Load Washing Machine Model:HNS1460TVE/ME
80cm
100cm

Page 11
height: 850mm / width: 595mm / depth: 565mm
Net Dimension
595
850
565
Front Load Washing Machine Model:HNS1460TVE/ME

Page 12
Top Cover
handle
Program selector
Detergent dispenser
Door
Porthole
Button
Bottom plaque
Name of the parts
Front Load Washing Machine Model:HNS1460TVE/ME

Page 13
E: Washing temperature button
Touch this button lightly, the washing temperature will be displayed on the
screen. Select a temperature according to the type of laundry.
Wash programming knob
By turning the knob clockwise/counterclockwise, the required program can be
selected. There are 11 programs available. After a program is selected, the cor-
responding light will go on. (Refer to Guide to Operational Program Selection).
Start / Pause Button
When the washing machine is connected to the power socket and a program is
selected, washing operation will start. Lightly touch this button during a wash
cycle, operation will stop and the digits on the screen start blinking. Touch it
again to resume operation. To cancel a wash program during a wash cycle,
touch this button, when the digits on the screen start blinking, press the Power
switch, the program will be cancelled.
D: Spinning Speed Setting Button
Touch this button lightly to select the desired speed. When a speed is set, it will
be displayed on the screen.
Note: Different water temperatures and spinning speeds can be set for different
laundries. Wash using the default settings if there is no special requirement.
Power Switch
Press this button to switch on the washing machine. Press it again to switch it off.
Opertional Functions
A
B
C
•••
Front Load Washing Machine Model:HNS1460TVE/ME

Page 14
G: Detergent distribution drawer
Open the drawer, three compartments can be seen:
Compartment 1: Pre-wash detergent
Compartment 2: Normal - Quick wash detergent
Compartment 3: Softener, conditioning agent,
perfume, etc.
E+F Key Combination ( After you press the Start/Pause button ,the E+F Key Combination is available )
Press these two keys simultaneously, the sign "LOCK" and the remaining washing time
are displayed on the LED alternately. Now all the function keys except the Power switch
can be locked. Press the key combination again to cancel this function.
H: Display
Such information as remaining wash time, temperature and speed setting and error
messages will be shown.
Note: After power is switched on, the display will go on and the remaining wash time
decreases. As the water pressure and temperature may differ, the remaining time may
be adjusted accordingly. When the laundry is not balanced during spinning, the time
may be automatically prolonged. These are normal phenomena.
Functions
F: Delay Button
Touch this button lightly, the washing machine will start operation after a period of time
and the corresponding indicator will go on. The range is 0.5-24 hours; each touch of this
button increases a half hour. After the button is set, press the Start/Pause button to start
countdown of the set time (the time is displayed on the screen until the program ends).
Front Load Washing Machine Model:HNS1460TVE/ME

Page 15
Front Load Washing Machine Model:HNS1460TVE/ME
90
90

Page 16
Error Display and Troubleshooting
Error message:Door is not properly shut 20s after program is started.
Troubleshooting:
N
Pushing the door to Check Whether Door
is properly shut or not
Y
Error message:Drainage error, water not emptied within 4 min.
Troubleshooting:
Y
Cutoffthepowerandthenturnonagain.
Check the voltage between brown wire and
blue wire of door lock, is it between AC
220-240V?
N
Door lock is broken and need
replacing, then make sure wire is
connected properly.
N
Check the voltage between brown wire
and blue wire of PCB, is it between AC
220-240V?
Check if drain pump acts by touching
pump position Y
Check if drain pump or
drain pipe is jammed, and
open the filter and clean
N
Cut off the power and choose spin program to
start, then check the import voltage of drain
pump, is it between AC 220-240V?
Replace drain pump
N
Cut off power and pull out water level
pressure switch wire connection. Set spin
program to start. Check the export voltage to
drain pump, is it between AC 220-240V?
Replace PCB
Y
Replace
PCB
Connect the wire properly
Check if the wire connecting door lock
and PCB is loose
N
Check if water is emptied Y
Cut off power and water level pressure switch wire
connection, measure the resistance of 1 and 3 pin, is it
infinite? If not, it is water level pressure switch failure
andreplaceit.Ifitis,thenrepairandcheckPCBand
wire as followed.
N
N
Y
Y
The wire between
PCB and drain
pump is not
connected
properly.
Replace the wire.
220-240v
Shut the door properly.
220-240v
Front Load Washing Machine Model:HNS1460TVE/ME

Page 17
Error message:Temperature sensor is not properly connected or damaged (display at the end of a
program).
Troubleshooting:
NTC exist open circuit .Replace it
Y
Check if NTC is connected properly
Cut off power and measure the resistance
of temperature sensor by multimeter, is
it between 5-14k ?
Y
N
Connect NTC well
N
Check the wries of NTC, are they connected
well.
Y
Disconnect the white wire and black wire
from PCB, and measure if the resistance
between white wire and black wire of PCB is
it infinite?
N
Replace PCB
Connect all wires well
N
Replace wire
Y
Error message:The heater may be broken
Troubleshooting:
Y
Cut off power, check the resistance of
two pins of heater element by multimeter,
is it between 32-35 ?
Heater element
must be broken,
please replace it
N
The control wire may be broken,
otherwise PCB must be broken.
Please replace the broken one.
N
Check if overload of laundry YReduce the laundry
Front Load Washing Machine Model:HNS1460TVE/ME

Page 18
Error message:The required water level is not reached within 8 min
Troubleshooting:
N
Check if inlet valve is jammed
Clean inlet valve
N
Draw out the dispenser and check if water is
entering
Observe if the height of
drain pipe not reach 80
cm. If water level
pressures switch and
the hose is leaking gas
N
Turn on power, and set pre-wash mode, then
start. Check the import voltage of
electromagnetic valve by multimeter
,isitbetweenAC220-240V?
Electromagnetic valve must be broken, please replace
it.
N
Check if tap is closed or water pressure is too
low (usual between0.03-1 MPa)
Open the tap or wait for normal water pressure to use
The wire connected PCB and inlet valve is not
properly. Please reconnect it or replace it.
Y
Y
Y
Y
Y
Check if water is leaking from washer
bottom. inlet pipe. drain pipe or other
pipe connection
YReadjust or replace the broken parts
Replace PCB
N
N
Check if export voltage from PCB to
electromagnetic valve, is it between AC
220-240V?
220-240V
Front Load Washing Machine Model:HNS1460TVE/ME

Page 19
Error message. Motor overheat protection or damaged.
Troubleshooting:
Y
Cut off power and check if motor wires
are connected well
Reconnect well
N
N
Put the motor in normal temperature about
ten minutes, and then test again. If the
resistance is natural, it is caused by
overheated protection. Then check and
deal with overload, abnormal voltage. If
not, please replace motor
Y
Measure if resistance of motor winding by
multimeter, is it as followed?
YRepair wires
Pull out the wire connection of motor
Then check if circuit is open by multimeter
1
3
7
2
5
8
1-2(between white and white):5
3-5(between brown and red):3.4
7-8(between grey and black): 4 0
Front Load Washing Machine Model:HNS1460TVE/ME