Haier HWD1406 User manual

Double-roller Full-automatic
Washing Machine
Instruction Manual
Please keep it properly for reference.
Please read the manual carefully before using this machine.
HWD1406

Product Characteristics
DD variable-frequency motor
technology
Highlighted touch screen display
technology
Best door-opening height design
Steel rib integrated structure
Window mat anti-bacterial and
anti-mildew technology
Air washing function
Shelf drying function
Cleaning solution and disinfectant automatic adding technology
Double-balanced ring vibration
reduction technology
Anion deodorization technology
Self-cleaning function
Drawer dox design
Specification
Model
Power
Inflowing water pressure (MPa)
Rated washing capacity
(kg)
Rated dehydration capacity (kg)
Rated drying capacity (kg)
Rated drying speed (rpm)
Washing noise dB(A weighted)
Dehydration noise dB (A weighted )
B
Energy efficiency grade
Overall Dimension
(height/depth/width)
(mm)
Diagrams in this manual are diagrammatic drawings. The appearances and colors of the
product and its parts may be different from those shown in the diagrammatic drawings of
this manual owing to product’s improvement and series expansion, please subject to
material object. Apologize for this.
This machine belongs to class-I appliance, please ensure electrical safety when you use
it.
220V-240V/50Hz
50
68
1400
5
8
8
0.03-1.0
HWD1406
1200/680/600

Table of Contents
1 Safety Cautions .....................................................1
2 Operation Cautions.................................................3
3 Names of Components (Accessories).................... 4
4 Disassembly of Packaging and Transporting Parts
and Adjustment of Feet...........................................6
5 Preparation before Using........................................7
6 Washing Mode Introduction....................................9
7 Control Panel and Procedural Specification ........ 11
8 Procedural Guide..................................................13
9 Preparation before Washing and Referenced
Clothing Weight ....................................................15
10 Operation Steps....................................................16
11 Application of Detergent Dispenser Box .............. 17
12 Automatic Addition methods of Cleaning Solution
and Disinfectant ...................................................17
13 Application of Anion Deodorant Drawer ...............18
14 Other Function......................................................18
15 Cleaning/Maintenance..........................................21
16 Troubleshooting....................................................22

1
1. Safety Cautions
Power Line and Socket
In Use
(It is not allowed to operate the areas with the mark, otherwise, it is likely to damage the
washing machine or endanger the personal safety of users.)
(The contents with the mark relate to product and user’s safety, thus the user shall
undertake the operation in strict accordance with requirements, otherwise, it is likely to
cause damage to the washing machine or endanger user’s safety.)
Not damage, process, randomly bend, clamp, twist, unplug or bundle the power line and the
plug.
Not place heavy objects on the power line and the plug.
Not touch, insert or unplug the plug with wet hands.
Stop using a damaged power line and plug as well as a loose socket.
Please use an independent power socket with maximum safe current more than 15A. The
grounding terminal in the socket shall be reliably grounded, and the socket shall be a qualified
product with CE certification.
Please completely insert the power plug into the socket aperture and clean the plug regularly,
since it will cause poor insulation, fire, etc. in case of dust accumulation and moisture.
Ensure that the power plug is unplugged when the washing machine is not used for a long time
or is being cleaned.
The user shall prepare fuses and other overload protection devices with suitable specifications
at home, and the ammeter, the power line and the socket should be able to withstand the
current of 10A.
If the power line is damaged, it must be replaced by the manufacturer, the agent or other
persons with relevant expertise so as to avoid dangers.
Not wash and dry clothes stained with beauty oil, massage oil, edible oil, animal oil, machine
oil, dry cleaning oil, propellant, diluents, petrol, resin and other inflammable substances.
Not place inflammable substances into the roller or near the washing machine.
Not wash, poach or dewater the raincoat, bicycle cover, feather clothing unsuitable for machine
washing, waterproof clothing and carpet, otherwise, it will cause abnormal vibration and
damage to the washing machine and the clothing during the dewatering process.
Not wash the clothing with inflammable cleaning agent, dry cleaning solvent and other chemi-
cals; not use inflammable spraying agent near the washing machine; and not insert or unplug
the power plug of the washing machine during the leakage of coal gas and other inflammable
gas.
Not open the drain filter during the operation, preventing plenty of water from flowing outwards.
Must use a new water inlet pipe and not allowed to reuse a used water pipe.
Under the normal operation of the washing machine, the pressure of connected running water
is allowed to be 0.03MPa at minimum and 1.0MPa at the maximum.

2
Inner Roller and Overall Unit
Not allow children to look at and enter the inner roller, to avoid injuries and personal safety
accidents of children.
Not place the low rack and bench near the washing machine, to prevent children from touching
the control panel of the washing machine through them.
Not allow children to use the machine independently.
Not place the washing machine in such place with much moisture and vulnerable to wind and
rain, otherwise, water will remain on the electrical appliance, resulting in ignition damage or other
incidents. If water is accidently sprayed or permeated into the washing machine, the machine is
not allowed to use until it is dried by air.
Not directly place the washing machine on an un-ventilated carpet; not block up the ventilation
opening at the bottom thereof; not place the machine close to the wall or the furniture so as to
avoid incidents; and not place the washing machine on a table higher than the ground for use, so
as to prevent the washing machine from falling off.
Not put and extend hands or feet into the lower part of the washing machine.
Not climb to the upper part of the washing machine or place easily-damaged objects on the
washing machine.
Not place the washing machine in such place near heat source, exposed to sunlight and easily
frozen in winter, so as to avoid the aging of plastic parts and rubber parts.
Not touch the inner roller, metal parts, the window screen, the master control board, the distributor
box and metal buttons of clothing during the washing or drying process or in the short time after
drying, to avoid the scalding. Furthermore, not touch the machine when hot water is being
discharged.
The machine can not be used by people (including children) with certain problems in physical
ability, sensory ability and intelligence, or in lack of experiences and knowledge, unless they are
under the monitoring or have been guided how to use the washing machine by people who have
the ability to ensure their safety.
Keep eyes on children to ensure they do not play the washing machine.
The mark, likely appearing on the washing machine or the external packaging,
indicates that the wasted product can not be treated by using the general treating
methods of household garbage, and the product shall be delivered to a special
collection site after being deprecated. The user can contact with the local govern-
ment to obtain the information of available garbage collection systems. If the
electrical equipment is treated by means of burying or accumulating in a garbage
dump, harmful substances are likely to permeate into ground water and enter the
food chain, which will pollute the environment and harm your health. If you intend
to replace the used electrical appliance with a new one, the vendor is legally
obliged to recycle your wasted electrical appliance for free.

17.
egapehtnonoitcurtsniehtotgnidroccatnatcefnisidronoitulosgninaelcgni
3
Anion Deodorization Drawer
To ensure the effect, please do not open the drawer during the process of anion deodorization.
Please ensure that the cover of the drain filter is tightly closed before the drawer is closed, so
as to prevent the filter cover from being damaged.
Please place shoes, plush toys and other big objects on a board at the bottom of the drawer
before the anion deodorization function is used, while socks, shoe pads and other small
objects are placed on the shelf at the upper part of the drawer.
It is suggested that an object exceeding 5 kg should be not placed in the drawer.
Please do not tread the drawer and the board after the drawer is drawn out.
Not put the baby or the pet into the drawer, avoiding safety accidents.
Not pour water into the drawer.
The maximum putting volumes of cleaning solution and disinfectant shall not exceed 600ml each time.
Please properly put cleaning solution and disinfectant according to the instruction on the cover
of the putting mouth, and incorrect putting is not allowed.
When the “ ” icon on the control panel twinkles, please timely supplement correspond-
Since the running water pressure is unstable, please check the joints of the water inlet pipe, the faucet and the drain
pipe each time before using the washing machine, to ensure the fastness of the joints. If the water pipes are loosened
or water is leaked, please close the faucet and properly handle it or contact the agent, the manufacturer or relevant
technicians. It can not be used before connection.
Not clamp the clothing when the door of the washing machine is closed.
Please ensure that the faucet is closed after the washing is finished.
When the washing machine is not used, please slightly open the door of the washing machine and wipe water and
bubble left on the window pad and the machine door glass, so as to avoid odor. The washing machine shall not be
covered by a plastic dustproof cover to avoid moisture accumulation.
Not open the detergent dispenser box when the machine is operating, to avoid uncompleted removal of detergent and
softener.
Not wash women’s underwear with steel wires in the washing machine, to prevent the washing machine and the
clothing from being damaged.
The machine just can wash the clothing suitable for machine washing. If in doubt, please follow the washing introduc-
tion logos on the clothes.
Water and power shall be cut off each time after the washing is finished, and clean the interlayer of the observation
window pad to prevent dirt from adhering to the clothing again.
If the machine is used at the temperature of 0°C or below, the water inlet valve and the drainage system may be
damaged.
If the machine is placed in the place with the temperature of 0°C or below, the machine can be used after being
moved to a place with room temperature for standing for 2-4 hours.
Not place the clothing contaminated by chemicals in the washing machine.
As for such kind of washing machine with the drying function, it is not allowed to put the drying shelf into the washing
machine when the washing procedures (except for the function of “Shelf Drying”) is selected, to prevent the washing
machine from being damaged during the operation.
As for such kind of washing machine with the drying function, when the clothing is being dried, please ensure that the
faucet is opened, as cooling and dehumidifying procedures are needed. Otherwise, the drying procedure can not be
conducted.
Please put small articles such as handkerchief, gloves and socks, and easily-winding and damaged clothes into
washing net bags for washing, poaching and dehydration, so as to prevent the small articles from dropping between
the inner roller and the window pad of the washing machine and result in inadequate washing and drying. The weight
of articles placed in each washing net bag shall not exceed 300g, and those washing net bags placed with articles
shall be placed into the washing machine together with other clothes which are not put in net bags, otherwise, the
balance of the washing machine will be reduced and the machine will abnormally vibrate.
After high-speed dehydration, the clothes will adhere to the inner roller wall of the washing machine due to the effect
of centrifugal force. If follow-up drying is needed, it is suggested that the user takes out the clothes and re-places
them into the washing machine for drying after the clothes are scattered in a shaking manner, in an attempt to achieve
the best drying effect.
Automatic addition device of cleaning solution and disinfectant
Others
2. Operation Cautions

4
3. Names of Components
(Accessories)
Cleaning
solution and
disinfectant inlet
Detergent
dispenser box
Side board
Door handle
Machine door
Machine door
glass
Drawer
Adjustable feet (four in total)
It is the diagrammatic drawing. The appearances and colors of the product and its
parts you receive may be different from those shown in the drawing owing to product’s
improvement and series expansion, please subject to material object.
Drawer handle
Window pad
Door lock
Control panel
Power key
Deck plate
Cover of the drain filter

5
5
Power line hanger
Power line
Cover of packaging
bolt hole
Accessories
Water inlet pipe assembly
Wrench Manual Drying shelf Measuring cup
Drain pipe Drain pipe clamp Drain pipe bracket Strapping tape
Packaging rod
Packaging bolt
Drain pipe joint
Water inlet valve
joint

6
4. Disassembly of Packaging and Trans-
porting Parts andAdjustment of Feet
Disassembly of Packaging and Transporting Parts
Packaging rods, packaging bolts and accessories are
used for fixing the internal components of the washing
machine during the transportation, and shall be
completely disassembled before use.
Firstly, the two packaging rods are dismounted and
then the three packaging bolts are disassembled, and
the positions thereof are shown in the Figure 1.
The specific operation is as follows:
Packaging boltsPackaging
cushions
Packaging
sleeves
Packaging
bolts
Packaging rods
Covers of
packaging
bolt holes
Packaging rods
Figure 1 Figure 4
Figure 3
Figure 2
Locking direction
Lock nut
Feet
Please properly keep the disassembled packaging
and transporting parts for future use in case of
moving and machine transportation.
Please ensure that the packaging and transportation
parts are assembled prior to machine transportation.
When the washing machine is even, the noise and
the vibration are reduced, thus please ensure that the
washing machine is adjusted evenly before use.
①please loosen the lock nut through a wrench
among those accessories.
②Adjust the level of the washing machine by
adjusting the heights of the feet.
③After the feet are evenly adjusted, the lock nut is
screwed along the locking direction through the
wrench.
Firstly the two packaging rods are disassembled from
the washing machine through a screw wrench or a
No. 18 wrench, and then packaging cushions are
taken out. The arrow in the Figure 2 shows the
disassembly direction.
Next the three packaging bolts are disassembled
from the washing machine through the screw wrench
or a No. 13 wrench, and then packaging sleeves are
taken out. The arrow in the Figure 3 shows the
disassembly direction.
The covers of the packaging bolt holes are clamped
into those holes left after the packaging rods and the
packaging bolts are disassembled, shown as the
Figure 4.
Adjustment of Feet

7
5. Preparation before Using
Connection of the Water Inlet Pipe
Please install and adjust the washing machine
according to the Manual to ensure that you can
safely and correctly use it.
Importance: Use a new water inlet pipe, not reuse a used water inlet pipe.

8
1. Connect the Water Supply
System
Screw the terminal nut cap of the water inlet
pipe to ensure that the nut is fastened in place.
Note: The washing machine only can be
connected with a cold water supply system.
2. Connect the Washing Ma-
chine
①Sleeve the nut cap of the toggle joint of the
water inlet pipe to the joint of the water inlet valve
behind the washing machine in a screwing
manner.
②Screw the nut of the water inlet pipe and ensure
that the nut is fastened in place.
Note: When the water inlet pipe is connected with
the water supply system and the washing
machine, screw the nut cap with hands to ensure
that the nut is not screwed too tightly.
3. Check If The Water Inlet
Pipe Is Connected Well.
①Check if the connection is firm.
②After installation, open the faucet to check if
water is leaked.
③Before using the washing machine each time,
please check and confirm whether the water
inlet pipe is firmly connected with the faucet.
④Be sure not to bend the water inlet pipe with
force, to avoid casing damage.
Connect the Drain Pipe
Water inlet
pipe
Drain pipe
Strapping
tapes
Drain pipe
joint
Figure 1 Figure 2
Figure 3
Pipe clamp
Drain pipe
bracket
Water
supply valve
①Take the drain pipe and the drain bracket from
the accessory bags and assemble the drain
pipe bracket at the tail end (the straight end) of
the drain pipe, as shown in Figure 1.
②Take the pipe clamp from the accessory bag;
clamp the pipe clamp with big-nose pliers and
sleeve it at the top end (the bent end) of the
drain pipe; and next connect the top end and
the joint of the drain pipe and then fix them with
the pipe clamp, as shown in Figure 2.
③Connect the drain pipe to the water tank or the
vertical pipe and firmly fix them with supplied
strapping tapes, as shown in Figure 3.

9
6. Washing Mode Introduction
Safe Washing
Free Washing
After the power key is pressed for startup, all contents on the touch screen are displayed, and then the
following interface appears:
Press the key, the following interface appears:
Accurate
Washing
At this moment, re-press the key, select a needed mode among the three modes of “Washing”,
“Washing/Drying ”and “Drying”.; after the mode is selected, press the “Start” key，and then proce-
dures of the washing machine are started.
After the power key is pressed and the machine is started, all contents on the touch screen are displayed,
and then the following interface appears:
Press the key, the following interface appears:

10
At this moment, re-press the key, and select a needed mode among the three modes of
“Washing”, “Washing/Drying” and “Drying”. Therefore, the procedure corresponding to the selected
mode is displayed at the periphery of the procedure selecting ring. And then slightly slide the
procedure selecting ring to select the needed procedure with hands. After selection, the “Start”
key is pressed, and procedures of the washing machine are started.
Introduction to selection of selective procedures under the mode of free washing
Washing: ramie cotton, chemical fiber, wool, super soft, memory, mixture, underwear, only dehydra-
tion, only poaching, quick washing, night washing, feather and high temperature sterilization.
Washing/Drying: ramie cotton, chemical fiber, memory, mixture, only dehydration, only poaching,
quick washing, night washing, high temperature sterilization and roller self-cleaning
Drying: ramie cotton, chemical fiber, memory, air washing and shelf drying
After the power key is pressed for startup, all contents on the touch screen are displayed, and then
the following interface appears:
Press the key, the following interface appears:
At this moment, selection keys and function keys on the display interface are light. Slightly slide the
procedure selecting ring to select the needed procedure with hands, then select other selection
keys and function keys on the display interface as needed to adjust the washing time, the poach-
ing times, dehydration time, heating temperature and dehydration speed, and select such function
keys as reservation, strong decontamination, etc. After selection, press the “Start” key, and
procedures of the washing machine are started.
When the power key is pressed for startup, the key is pressed, and its icon becomes
bright from dark and the procedure of anion deodorization begins running. During the operation of
anion deodorization, the key is pressed, and its icon becomes dark from bright and the
procedure can be canceled.
The anion deodorization procedure is independent from the washing procedure and can be oper-
ated together under the modes of safe washing, free washing and accurate washing.
Accurate Washing
Anion Deodorization
цикл

11
7. Control Panel and Procedural
Specification
“Disinfectant”
When the “Disinfec-
tant” key is bright, it
indicates that the function
of disinfectant automatic
addition is started.
When the “Disinfec-
tant” key is dark bright, it
indicates that the function
of disinfectant automatic
addition is canceled.
When the “Addition”
key in front of the
“Disinfectant” key
twinkles, please add
disinfectant.
“Door Lock”
When the door
of the washing
machine is locked,
the icon is bright,
and the door can
not be opened.
When the
“Start ” key or the
“Cancel” key is
pressed, the icon
of the door lock is
dark, and the door
can be opened.
“Cleaning Solution”
When the “Cleaning Solution” key is
bright, it indicates that the function of
cleaning solution automatic addition is
started.
When the “Cleaning Solution” key is
dark bright, it indicates that the function
of cleaning solution automatic addition is
canceled.
Under the mode of accurate
washing, the key also can be adjusted to
such modes as dirty, general, a bit dirty
according to the dirty degree of clothes
and clothing quantities.
When the “Addition” key in front of
the “Cleaning Solution” key twinkles,
please add cleaning solution.
“Reservation”
The “Reservation” key is used for setting the finish
time of the washing procedure, which is valid under
the modes of free washing and accurate washing.
After the washing procedure is changed, the reserva-
tion is automatically canceled. Before the procedure is
started, the “Reservation” key is pressed to set the
reservation time. The “Reservation” key is pressed
one more time, the reservation time is increased by 30
minutes. The selective time ranges from 0.5 to 24
hours. When the “Start/Pause” key is pressed to start
the procedure, the reservation time is on countdown.
The reservation time is operation finishing time. If
running time of the washing procedures is longer than
reservation time, reservation time is not executed and
the washing procedure starts operating immediately.
“Anion Deodorization”
The procedure of anion deodorization can be set
or canceled by pressing the “Anion Deodorization”
key. The function can be used independently and is
not influenced by washing procedures.
If the drawer is opened or is not tightly closed
during the operation of anion deodorization, the
indicating lamp for anion deodorization will twinkle.
“Strong Decontamina-
tion”
Under the mode of
accurate washing, it is
valid to press the key
before the stating of the
procedure. After the key
is pressed, the washing
time correspondingly
increases.
“Poaching”
The poaching times
can be selected by
pressing the “Poaching”
key, with 8 times at the
maximum.
When nothing is
displayed in the poaching
display area above the
key, it indicates that the
poaching is not
conducted.
“Washing”
The main
washing time (not
including water inlet
time and heating
time) can be set by
pressing the
“Washing” key.
“Children Lock”
After the washing machine is started, in order to
avoid error operation of children and external
interference to the operation of the washing
machine, the key corresponding to the selective
washing mode shall be pressed for 3 seconds
during the operation of the procedures (for example,
under the mode of safe washing, the “Safe
Washing” key is pressed for 3 seconds), then it
locks. On the contrary, it unlocks.
After the children lock is started, all the keys
except for the power key are invalid.
After procedural operation, the function of the
children lock is automatically canceled. In case of
power failure during the operation, the function of
the children lock can not be automatically canceled,
thus the washing machine shall be restarted and
the function of the children lock is canceled by hand
operation.
MNH Minutes
цикл
When the “Sound” key is bright, it indicates
the function of sound is started.
“Sound”
When the “Sound” key is dark bright, it indicates
the function of sound is canceled.

12
Procedure Selecting Ring
It is valid under the modes of free washing and accurate
washing.
The washing machine has the function of automatic shift.
When the user selects the procedure with the automatic shift
function, the icon of “ ” is displayed on the remaining time
display area. After the door is closed and the “Start” key is
pressed, the weighting begins and the optimal washing condition
is automatically calculated, so that water, electricity and time are
effectively saved.
If automatic weighting is not needed, when the icon of “ ”
is displayed on the remaining time display area during the
automatic weighting process, the procedure selecting ring can be
slightly slided with hands, namely, the cloth shifts including “ ”,
“ ”, “ ” and “ ” can be set with hands. It is
not allowed to select “ ” under the washing/drying mode
and the drying mode can not be selected with hands.
In the manual selection, when clothes in the roller are
excessive (surpassing half of the roller), it is suggested that the
“ ” or “ ” is selected and when clothes in the roller
are few (not surpassing half of the roller), it is suggested that the
“ ” or “ ” is selected.
“Start/Pause”
The procedure begins to automatically run
when the “Start/Pause” key is pressed.
During procedure running process, the
running procedure can be paused when the
“Start/Pause” key is pressed. If the unlocking
condition is met, the door of the washing
machine can be opened. The procedure
continues running when the key is re-pressed.
“Power”
Under the shutdown condition, when the key is
pressed, the washing machine is started.
During the running process or when the icon of
“ ” is displayed, the washing machine is
shut down and the power thereof is cut off by
pressing the key for 2 seconds.
“Safe Washing”
Repeatedly press the “Safe Washing” key
to select the needed washing modes (washing,
washing/drying and drying), and the operation
begins by pressing the “Start” key.
“Free Washing”
Repeatedly press the “Free Washing” key
to select the needed washing modes (washing,
washing/drying and drying). The procedure
selecting ring can be slightly slided with hands
to select the needed procedure, and the
operation begins by pressing the “Start” key.
The differences of contents displayed by the control panel of a washing machine
with the drying function and the washing machine without the drying function
refer to relevant displayed contents of disinfectant, cleaning solution and drying.
“Accurate Washing”
The “Accurate Washing” key is pressed
and the procedure selecting ring can be
slightly slided with hands to select the needed
procedure. The selection keys on the touch
screen can be selected as needed and the
operation begins by pressing the “Start” key.
“Drying”
The key is valid under the mode of accurate washing.
After the “Drying” key is pressed, such modes as strong
drying, weak drying, ironing, 120min, 90min, 60min and
30min, canceling the drying can be sequentially and
circularly selected.
The selective drying ranges of each procedure are
different.
Dehydration time can be
selected by pressing the
“Dehydration” key,
Different procedures have
different maximum dehydration
time. When nothing is displayed
in the dehydration display area
above the “Dehydration” key, it
indicates that the dehydration is
not conducted.
“Dehydration”
“Temperate”
The heating
temperature can be
selected by pressing
the “Temperate” key.
The allowable
maximal heating
temperature of each
procedure is different.
When the tempera-
ture display area above
the key is dark, it
indicates that the
heating is stopped.
“Speed”
The dehydration
speed can be selected
by pressing the “Speed”
key.
The allowable
maximal dehydration
speed of each procedure
is different.
When the rotation
speed display area
above the key is dark, it
indicates that the
dehydration is stopped.

13
8kg
8kg
8kg
8kg
3kg
3kg
5kg
5kg
8kg
2kg
2kg
2kg
2kg
8. Procedural Guide
Procedural
content
Used for washing and drying ramie cotton
fabric; the default procedure has the
function of stopping after finishing cleaning
Used for washing and drying ramie cotton
fabric capable of being washed at high
temperature
Used for washing and drying chemical fiber
fabric; the default procedure has the
function of stopping after finishing cleaning
Used for washing feather clothing capable
of being washed by machine
Used for washing wool fabric capable of
being washed by machine
Used for washing and drying at night with
small noise
Used for washing easily-damaged clothing
capable of being washed by machine
Used for washing ramie cotton and
chemical fiber clothing which is not so dirty
(Note ①)
Used for memorizing user’s individual
procedure setting
Used for mixed washing of clothes made of
different materials
Used for washing cotton underwear
suitable for machine washing
Used for washing the internal and external
rollers of the washing machine by adding a
little washing power or dedicated detergent,
in which no clothing is placed
Note
Used for poaching clothes independently
Used for dehydrating clothes indepen-
dently
Used for drying clothes, sterilizing and
deodorizing
Used for drying plush toys and clothes which
are easily deformed in the drying process
Note ①: Time displayed on the display screen of the quick washing procedure does not include clothes distributing time in
the dehydration process. When the quick washing procedure is used for washing, please do not use excessive
washing power, detergent or softener, so as to avoid inadequate poaching.
Note ②: The roller self-cleaning procedure is used for cleaning the internal and external rollers, in which no clothing is
placed.
Recommended
clothing
Validity of washing procedures under different operation
modes
“Washing” mode
Whether correspond-
ing procedure is valid?
Maximum capacity
of corresponding
procedure

14
5kg
3kg
5kg
1kg
5kg
3kg
3kg
3kg
5kg
5kg
5kg
3kg
Procedural
content
Note ③: The shelf drying procedure is used for drying caps, plush toys, cloth shoes and other easily damaged clothes. The clothes
to be dried must have drying marks. It is not allowed to place excessive clothes on the drying shelf, otherwise, the drying
shelf will deform and the drying is inadequate. Under the procedure, the drying shelf must be used.
Validity of washing procedures under different operation modes
“Washing/Drying” mode
Note
Note
Whether correspond-
ing procedure is valid?
Maximum capacity
of corresponding
ing procedure
“Drying” mode
Whether correspond-
ing procedure is valid?
Maximum capacity
of corresponding
ing procedure

9. Preparation before Washing and
Referenced Clothing Weight
Preparation before Washing
Referenced Clothing Weight
Blending work clothes
(including a jacket and
trousers),
around 800g
Cotton nightclothes
(including a jacket and
trousers),
around 300g
Blending shirt,
around 200g Cotton undershirt, around 130g
Cotton bath towel,
around 300g Cotton briefs, around 70g Cotton socks, around 30g Cotton jeans, around 600g
Check whether the cleaning solution bottle and the disinfectant bottle on the table board of the washing machine
needs to be added with solution.
Check whether clothes to be washed have special requirements and are suitable for machine washing and
drying, to avoid the deformation and damage of the clothes.
As for clothes spotted with much mud, please remove the dirt
before washing.
Please separate easily faded clothes from other clothes for washing.
Please take out coins, sand, hairpins and the like from the pocket
before washing.
Tie the necktie, buckle buttons, zip the zipper and sew the seam.
In order to prevent buttons of clothes from making sound, please turn clothes with buttons over before they are
put into the washing machine.
Washings shall not be excessive, please unfold and fluff up clothes before they are put into the
washing machine.
Please place small objects, easily wound and worn clothes into the washing bag for washing,
poaching and dehydration, so as to avoid the damage. When in use, the washing bag is not allowed to be
dehydrated independently, instead, it shall be dehydrated together with other clothes so as to avoid abnormal
vibration or non-drying.
15

5
4
3
2
1
8
6
7
10. Operation Steps
Connect the
water inlet
pipe and open
the faucet
Insert the power
plug into the
power socket
Correctly
place the
drain pipe
Press the power
key to start the
washing
machine
Open the door of
the washing
machine, put
clothes therein,
and close the door
You can select the following washing modes according to your using habit
Press the “Start/Pause”
key to start the
procedure
To ensure automatic
addition of cleaning solution,
please press the “Cleaning
solution” key, and select the
mode of “Dirty”, “General” or
“A Bit Dirty” according to dirty
degree of clothes and cloth
quantities.
To ensure automatic
addition of disinfectant,
please press the “Disinfec-
tant” key.
When not using the function
of automatic addition of
cleaning solution but using
solid washing power, please
add moderate washing power
to the dispenser box.
①Safe Washing:
As for the machine with the drying function, after the “Safe Washing” key is
pressed, continue to press it to select the needed mode among those modes of
“Washing”, “Washing/Drying” and “Drying”.
As for the machine without the drying function, directly press the “Safe
Washing” key.
②Free Washing:
As for the machine with the drying function, after the “Free Washing” key is
pressed, continue to press it to select the needed mode among those modes of
“Washing”, “Washing/Drying” and “Drying”, and then select the needed
procedure through the procedure selecting ring.
As for the machine without the drying function, after the “Free Washing” key is
pressed, the needed procedure can be selected through the procedure
selecting ring.
③Accurate Washing:
After the “Accurate Washing” key is pressed, the needed procedure can be
selected through the procedure selecting ring, and washing time, poaching
times, dehydration time, drying time (available for the machine with the drying
function), heating temperature, dehydration speed and other functions can be
adjusted through the function selecting key on the control panel.
16

11. Application of Detergent Dispenser
Box
12. Automatic Addition Methods of
Cleaning Solution and Disinfectant
Please use foamless or low-foaming washing power suitable for
full-automatic roller-type washing machine.
Washing power dosage refers to the using instruction of washing power.
Excessive washing power will result in heavy foaming and easy
overflowing, thus impacting dissolution of washing power and bringing
difficulty in poaching.
The highest level of softener shall not exceed the MAX mark on the
siphon cap.
In order to achieve the optimal washing effect, it is recommended that
softener is placed into the dispenser box after being diluted by water at
the proportion of 1:1. Excessive softener will damage artificial fiber.
Softener dosage refers to the using instruction of softener.
After procedure running is finished, it is normal that some water is left in
the dispenser box, because the water is supplementing water or
condensate water in the procedure running process.
The handle of the dispenser box is concave and is easy to accumulate
dust, thus please use a piece of cloth to wipe and clean it.
A user can add cleaning solution and disinfectant into a cleaning
solution bottle and a disinfectant bottle in advance. During the washing
process, the washing machine can automatically add them into the
washing roller according to clothes weight, and manual addition is not
needed.
Maximum putting dosage of each bottle is 600ml per time. (Please refer
to the using instruction of the measuring cup provided in the washing
machine)
Putting methods:
①Open the cover of the putting mouth;
②Unscrew the bottle stopper;
③Pour the cleaning solution from the right bottle mouth and disinfec-
tant from the left bottle mouth, and then screw up the bottle stopper
and cover the cover of the putting mouth.
Please correctly put cleaning solution and disinfectant according to the
instruction on the cover of the putting mouth, and incorrect putting is not
allowed. After the addition, please clean the area nears the cover of the
putting mouth and the bottle stopper.
Cover of the putting mouth
Bottle stopper
Left disinfectant
bottle Right disinfectant
bottle
Figure 1
Figure 2
Figure 3
Put liquid softener
Siphon cap
Put washing power
17