Haier HWM10-01 User manual

Portable Washing Machine User's manual
This manual is for
HWM10-01
Please read this manual
carefully before using.
Retain it for future reference.

Names of the parts................................................................................................1
Safety precautions .............................................................................................2
Installation and adjustment ...................................................................................4
Preparation before washing .................................................................................5
Process washing...................................................................................................6
Disposal after washing .......................................................................................8
Trouble shooting ..............................................................................8
Packing list *Specification....... .............................................................................9
Contents

Base frame
Pulsator
Washing Tub
Top Cover
Handle
Washing Timer
High Water Level Line
Low Water Level Line
9
12
15
3
6
Drain hose
Big Handle
Meaning and description of the symbols
Names of the parts
Warning sign
Forbidden sign
Contents marked with that symbol are related to the safety
of the product and the personal safety of the users. Please
operate in strict conformity to the contents, otherwise it may
cause damage of the machine or injure the personal safety
of the user.
Contents marked with that symbol are actions forbidden to
perform. Performing of those actions may result in damage
of the machine or injure the personal safety of the user.

Safety precautions
Do not damage the power cord, bend , extend, twist, bind or alter it by force. Do not
press or nip it with weight. If the supply cord is damaged, it must be replaced by the
manufacturer or its service agent or a similarly qualified person in order to avoid a
hazard. Keep the pin of the power plug clean, if the power plug is polluted with
dust, please wipe with dry cloth carefully. If the power cord or the power plug is
bad, to avoid risk it is required to have it replaced by the technicians of our
special shop or the after-sale service department.
The power cord plug should be
convenient to be pluged in or pluged
out with hand while the washing
machine runs normally. Be sure to pull
the plug out and close the water tap
when the machine is idle, when
moving the machine, or when cleaning
the machine. Do not use wet hand to
insert or pull out the power plug.
Do not let the machine share one
receptacle with other electric appliances.
If the power plug is damaged, or the
plugging into the receptacle is loose,
do not use the plug any more.
Do not wash water-proof laundries like
the raincoat, bike covers etc.
Do not use water hotter above 50 C .
Do not put the machine at damp place like
the bathroom. Never wash it with water.
Not put wet laundries on the control panel.
Please insert the power cord into special
receptacle with rated voltage. Be sure to
use single-phase three pins receptacle.
The earthing terminal of the receptacle
must be earthed reliably. If possible,
please adopt electric leakage protector.

Safety precautions
Do not decompose, repair or alter the
machine by yourself.
Do not put any hot or heavy items (such
as the kettle with hot water ) on the
washing machine.
Do not wash laundries with volatile
materials (such as thinner, petrol etc.)
The handicapped or children without
care shall not use the machine.
Keep the machine away from direct
sunlight and heat source like the heater.
Do not stretch hands into the working
machine. It is dangerous even if the
rotation is slow. Take special care of
the children. Do not let the children
climb the washing machine.
Petrol
Thinner

<10cm
Installation and adjustment
Please install and adjust the machine according to the requirement of the manual. It is
very important to your security and correct operating the machine.
Usage of the drain hose
The drain hose shall drain smoothly
1.The height of the drain hose shall be less than 10cm,
or the drainage will not be smooth, and cost such long
time that the machine may stop at mid way.
2.Do not trample or press the
drain hose.
3. Do not lengthen or cut down the
drain hose.
The largest allowed slope of the shank base of the machine is 2 .
The slanting or rough ground will result in unstable running or
stoppage of the machine, Please adjust it .
Confirm it's horizontial
Hang the lead line to check if it is horizontial
Adjust the installation position
How to usethe whitener
Fill water todecided level. Dilute the whitener with container. Pourit slowly into
the washing tub.
Avoid using whitener on laundrieswith color or pattern as they are prone to
lose color.
The whitener shall not touch the laundries directly.
Refer to the user's manual for the usage and quantity of the whitener.
For powder whitener, please dissolve it before use.

Direct dissolved in the machine
1.Fill some water.
2.Add the power. Run for 30 seconds to dissolve it completely.
3.Put in the laundries. Select suitable water level.
The instant dissolvingof the washing powder:
1.Prepare warm water of 30 and a container.
2.Add the powderwhile stirring to fully dissolve it.
It is suggestednot to use high sudsing detergent.
Washing powder with poor quality or long time storage maybe caked.
How to use the washing powder
Preparation before washing
Pay attention to followings before washing the laundries
Confirm if
there's special
requirment for
the laundries.
Clear the pocket.
Take out the
coins , sand,
hairpins etc.
Fasten the
buttons and
zippers.
When the pulsator
is running , the
buttons of the
laundries may
cause noise. For
the sake of
discretion,please
put the laundries
with buttons into
other laundries.
The quantity of
the laundries
shall not exceed
the rated value.
The big laundries
like the jeans
shall be put in
loosely.
A.Please check if the laundries are applicable for washing.
b.Separate those not colorfast from other laundries.
c.For laundries not water absorbing, please put them into water with hands.
d.For laundries with much soil, lease remove the soil first. You can add detergent on the
part with serious soil directly. It is much easier to remove the soil by that mean.
e.For laundries likely to get lint ball or with long fiber, please first turn the inside out before
putting them into the water.
F.Do not put the laundries polluted with chemicals directly into the washing machine.

High water level about 9L
Detergent
quantity(kg)
under700g
Under300g
Process washing
1.Put into thelaundry under700g and detergent, then
fill the water needed.
The selection of detergent quantity
Water level
/Water quantity
Low water level about 5L
Standard usage quantity
Concentrated washing
powder
About 7.5g
About 4g
About 12g
About 7g
Common washing
powder
Attention
2.After add the water the water level must
be under the high line so as to avoid
splashing of water
1.Confirm that the drain hose is properly
hanged before fill water, or the water will
flow through the drain hose.
Attention
Do not sprinkling the water
to the base frame.

9
12
15
OFF
3
6
9
12
15
3
6
Process washing
2.Close the toplid
3.Connect the powerline
Confirm that the washing machine is
earthed reliably. Then insert the power
plug into the receptacle. Do not connect
the earth terminal to the gas pipe and
tap water pipe.
4.Set the washingduration
Select washing duration depending on the laundry
Washing Timer
About ~36
About8~10
About2 4~
Laundry Washing Duration(min)
Silk fabric(thin laundry)
Knitted fabric/chemical fabric
Cotton, blending or linen fabrics
Very dirty or heavy laundry About10~13
5.Finish washing
The tumbler stops revolving. Level the
drain hose down to let the waste water
out.

Disposal after washing
Please first pull off the power plug from the receptacle before cleaning.
After washing, pull off the power plug hang up the
power cord.
Close the top lid then place the machine well.
Do not store water in the washing machine for a long
period. Drain the water completely after each using.
Wipe off the water drops on the surface of the
machine and inside the tub. Open the top lid for
some time (about 1 hour), then let the machine dry
If the cabinetis dirty, wipe it with wet cloth
If the cabinet is very dirty, wipe it with neutral
detergent.
Do not flush it directly with water.
Trouble shooting
The following phenomena are not breakdowns sometimes. Please confirm again
before sending it to repair.
How to settle
Phenomena
The machine
does not act
There's abnormal
sound inside the
machine
Is there power failure? Use it when the power is on.
Insert the power plug tightly.
Is the power plug loose?
Is the machine slanting? Level the machine properly.
Are there some metal?
foreign bodies in a tub?
Remove the metal foreign
bodies