Haivision Air Series User manual

Air Series
Quick Start Guide
Parc Edonia, Bat. X1
Rue de la Terre de Feu
35769 Saint Grégoire Cedex
France
Tel: [phone]
Document Version: v1.6

3
Front View
Screen
Activity
Link
Battery
HDMI 1.4 Output
HDMI 1.4 Input
3G-SDI Output
3G-SDI Input
Intercom
DC IN Connector
Analog Audio
Input/Output (right)
Analog Audio
Input/ Output (left)
Ethernet
Power Button
Settings Button
Back Button
Selection Wheel
Indicators
SD card slot
Removable
Battery
4 x micro SIM card
slots :
- Air220
- Air220-5G
- Air320e-5G
Rear View

4
1. Remove the rear cover.
1a. Press on top.
1b. Remove the cover.
1b1b
Getting ready
1a1a
2. Insert the battery (if not already installed).
3. Connect the AC/DC adapter to the unit and connect it to the power
supply.
4. The battery indicator lights up in green when charging. It turns to
blue when the unit battery is fully loaded.

5
8. Connect the video input cable (either HDMI or SDI).
6. Insert SIM cards into slots (Air220, Air220-5G and Air320e-5G).
3G-SDI
HDMI
5. Insert an SD card
Class 10 recommended
FAT32 or exFAT
For modem 1: slot 1A or 1B
For modem 2: slot 2A or 2B
7. Place the rear cover back.

6
Press the power button to turn the unit on.
Turning on the unit
1. Select and press to confirm.
2. Select and press to confirm.
3. Check that video source is Auto. If not, press
and turn to select Auto.
The default source is Auto.
5. Press to confirm.
Selecting a Video Source
When the unit is ready, the home screen appears:

7
Configuring a Destination Profile
2. Select and press to confirm.
3. Press to create a new Destination Profile.
4. Press to activate the keyboard and compose a
name for the Destination Profile.
5. Select and press to confirm.
1. Select and press to confirm.
10. Turn to select and press to
confirm.
7. Turn to select the Host field, and press the
wheel to enter the StreamHub IP address or Host-
name.
8. Turn to select the Input field, and press the
wheel to select Auto (for an Automatic Input
assignment).
9. Turn to select and enable the Auto-connect
function.
6. Turn to select the Type field, and press to
select StreamHub as Destination Profile Type.

8
1. Select and press to confirm.
The LIVE menu displays information:
2. Turn to the right to access the Live menu.
Auto-record (ON/ OFF)
Selected Live Profile
Selected Destination Profile
• Some indications are displayed:
Network Bitrate
End to End Latency
Source Standard
Live Duration
• When Auto-record is ON, additional indications appear:
Remaining Recording
Time possible on SD
card
Space used
on SD Card
1. Turn to the right.
2. Press to stop the Live.
3. Press again to confirm stopping the Live.
Starting a Live
Stopping a Live
Selected Record Profile
3. Turn to the left to select .
4. Press to start the live.
5. Turn to the left for more information.
Live Duration
Audio Levels

9
• Some indications are displayed:
Network Bitrate
Amount and
percentage of data
already forwarded (if
option enabled)
Source Standard
Record Duration
• When Auto-forward is ON, additional indications appear:
Remaining Recording
Time possible on SD
card
Space used
on SD Card
1. Turn to the right.
2. Press to stop the Record.
3. Press again to confirm stopping the Record.
Stopping a Record
1. Select and press to confirm.
The Record menu displays information:
2. Turn to access the RECORD menu.
Auto-record (ON/ OFF)
Selected Destination Profile
Starting a Record
Selected Record Profile
3. Turn to the left to select .
4. Press to start the record.
5. Turn to the left for more information.
Record Duration
Audio Levels

10
Starting a Forward
1. Select and press to confirm.
The FORWARD menu appears:
• To forward the last record:
a) Turn to select .
b) Press to confirm.
• To forward the all files:
a) Turn to select .
b) Press to confirm.
• To forward some specific files:
a) Turn to select and press to confirm.
b) Press to display the SD card content.
c) Turn and press it to select files.
d) Long press to start Forward.
Stopping a Forward
1. Turn to the right.
2. Press to stop the Forward.
3. Press again to confirm stopping the
Forward.

11
Turning o the unit
Long press the power button to turn the unit o.
All technical documents
Find the user guide and all other technical documents on Haivision
Info Center at https://doc.haivision.com.