Hakko Electronics FA-400 User manual

Smoke absorber/Desktop type
• Desktop solder smoke absorber that can be mounted horizontally or vertically
• A third mounting position is also available with an optional arm stand
Model No. FA400
Power consumption 50Hz : 15W
60Hz : 13W
Noise level 50Hz : 48dB
60Hz : 51dB
Maximum suction capacity
Vertically : 1.0m
3
/min. (50Hz) / 1.1m
3
/min. (60Hz)
Horizontally : 0.4m
3
/min. (50Hz) / 0.5m
3
/min. (60Hz)
Air velocity Vertically : 1.0m/s (50Hz) / 1.1m/s (60Hz)
Horizontally : 2.6m/s (50Hz) / 2.9m/s (60Hz)
Dimensions 166(W)×212(H)×113(D)mm
Weight 0.93kg
Filter size 130(W) ×130(H) ×10(D)mm
* Noise level is measured at a distance of 1m from the face of HAKKO 420.
* Maximum suction capacity is measured in the condition with filter.
Part No. Packing List
FA-400 HAKKO FA-400 Smoke absorber, Filter and Instruction manual

Horizontally/vertically mountable "2-Way Plus" tabletop smoke absorber
In addition to horizontal and vertical mounting, an optional arm stand allows a third mounting
style.
- When vertically mounted: - When horizontally mounted:
Can be absorbed widespread smoke. Powerful absorption at closer area with high flow rate.
Because of low height, it gives less shade keeping your
working area light.
* Because the absorption flow rate is fast, the table will
not be contaminated.
- When using a stand:
When sufficient space cannot be found or to absorb smoke from upper areas:
Significantly-reduced footprint
• The footprint was reduced by approx. 50% when mounted vertically and by 20% when
mounted horizontally compared to our previous model, the HAKKO 493.
The height was also reduced by approx. 20%.
(Units: mm)

Size comparison to previous model
(HAKKO 493)
Maintenance
• The absorption force at the filter decreases gradually over time as the absorber is used.
When the filter surface becomes completely white, the filter should be replaced.
Be careful that moisture, etc does not get on the filter.
Part No. Name Specifications
A1001 Filter set set of 5

Part No. Name Specifications
C1568 Arm stand w/ knobs
B1166 Knob ESD, set of 2
Arm stand