Hallowell HKL1515-1 User manual

KID LOCKER
ASSEMBLY INSTRUCTIONS
General Instructions
1. Check material received against the packing list. Check the number of packages received and then check the
contents of each package.
2. Check the material received for damage. If damage has occurred, secure a “damage notation” from the carrier
3. Identify each part as it is unpacked and put like parts together as close as possible to the working area where they are
to be assembled.
4. Be careful to use the correct hardware as specified in the assembly instructions.
CAUTION
In the interest of safety, all lockers must be securely anchored to the floor and/or wall. For safety, handle all components
carefully and wear work gloves when assembling lockers. Install all units plumb and tighten all hardware securely. Retain
instructions for future reference.
866-566-0500
[email protected]
www.Hallowell-List.com

3
5
21 4
KIDS LOCKER ASSEMBLY INSTRUCTIONS - HKL1515(24)-1
NOT FOR
ASSEMBLY
NOT FOR ASSEMBLY
NOT FOR ASSEMBLY
SA1553-1
PG. 1
11-24-14
87
69
PACKAGE CONTENTS
ITEM
NO.
PART NUMBER DESCRIPTION QTY.
1 KDHF1524-1LV DOOR-FRAME 1
2 KS1515-HKL BOTTOM- KIDS LOCKER 1
3 HTLC1515 HOME TEAM LOCKER CAP 1
4 KP1524-HKL SIDE PANEL 2
5 KR1524 BACK 1
6 MBT200 3/8" SLOTLESS BOLT 30
7 N201 HEX NUT 28
8 N110 DOME HEX NUT 2
9 RPE100 ESCUTCHEON PLATE 1

6
7
PG. 2
8
91
1) Bolt Side
panels (4) to
the inside of
the rear panel
(5). With bolt
(6) and nut (7).
2) Bolt Top (3)
to the outside
of the side and
rear panels.
With bolt (6)
and nut (7).
3) Bolt Bottom
(2) to the insde
of rear and side
panels.With
bolt (6) and nut
(7).
5) Place the
Frame (1) on the
locker and bolt it
on to top, side,
bottom and top.
With bolt (6) and
nut (7).
Bolt Escutcheon
plate (9) with
bolt (6) dome
nuts (8).
Tighten all
hardware
NOTE: FINGER TIGHTEN ALL NUTS, ENSURE UNIT IS SQUARE, THEN TIGHTEN ALL.
4
4
5
3
2
SA1553-2
11-24-14