Hallowell HOME TEAM LOCKER User manual

HOME TEAM LOCKER
ASSEMBLY INSTRUCTIONS
General Instructions
1. Check material received against the packing list. Check the number of packages received and then check the
contents of each package.
2. Check the material received for damage. If damage has occurred, secure a “damage notation” from the carrier
3. Identify each part as it is unpacked and put like parts together as close as possible to the working area where they are
to be assembled.
4. Be careful to use the correct hardware as specified in the assembly instructions.
CAUTION
In the interest of safety, all lockers must be securely anchored to the floor and/or wall. For safety, handle all components
carefully and wear work gloves when assembling lockers. Install all units plumb and tighten all hardware securely. Retain
instructions for future reference.
866-566-0500
[email protected]
www.Hallowell-List.com

1
2
3
4
5
6
HOME TEAM LOCKERS ASSEMBLY INSTRUCTIONS - HTL151548-1
SA1555-1
10-31-12
PG. 1
PACKAGE CONTENTS
ITEM
NO.
PART # DESCRIPTION QTY.
1 KDHF1548-1DP FRAME/DOOR ASSY. 1
2 HTLC1515 TOP 1
3 KP1548 SIDE 2
4 KH1515 HAT SHELF 1
5 KS1515 BOTTOM 1
6 KR1548 REAR 1
7 MBT200 3/8" SLOTLESS BOLTS 40
8 N201 HEX NUTS 38
9 N110 DOME HEX NUT 2
10 RPE100 ESCUTCHEON PLATE 1
11 H5K (OPTIONAL) SINGLE HOOK 2
12 H7K (OPTIONAL) DOUBLE HOOK 1

NOTE: FINGER TIGHTEN ALL NUTS, ENSURE UNIT IS SQUARE, THEN TIGHTEN ALL.
STEP 1:
Lay the rear panel on the floor. •
Bolt side panels(3) to the inside •
of the rear panel(6).
3
3
6
STEP 2:
Bolt top(2) to the outside •
of the rear and side
panels,
2
PG. 2
SA1555-2
10-31-12

1
PG. 3
STEP 3:
Bolt the Bottom(5) •
to the inside of the
rear and side panel.
Bolt the Hat Shelf(4) •
to the inside of the
side panels.
5
4
STEP 4:
Bolt Frame(1) to •
sides, top and
bottom.
NOTE: FINGER TIGHTEN ALL NUTS, ENSURE UNIT IS SQUARE, THEN TIGHTEN ALL.
SA1555-3
10-31-12