Hallowell Kid Locker Service manual

KID LOCKERS
INSTALLATION INSTRUCTIONS
General Instructions
1. Check material received against the packing list. Check the number of packages
received and then check the contents of each package.
2. Check the material received for damage. If damage has occurred, secure a
“damage notation” from the carrier
3. Identify each part as it is unpacked and put like parts together as close as possible
to the working area where they are to be assembled.
4. Be careful to use the correct hardware as specified in the assembly instructions.
CAUTION
In the interest of safety, all lockers must be securely anchored to the floor and/or wall.
For safety, handle all components carefully and wear work gloves when assembling
lockers. Install all units plumb and tighten all hardware securely. Retain instructions for
future reference.
866-566-0500
[email protected]
www.Hallowell-List.com

1
4
2
6
3
5
KID LOCKERS - ASSEMBLY INSTRUCTIONS - HKL151524-1
PACKAGE CONTENTS
ITEM
NO.
PART # DESCRIPTION QTY.
1 KDHF1518/24LV FRAME AND DOOR ASSEMBLY 1
2 KR1518 BACK 1
3 HTLC1515 TOP 1
4 KP1518 SIDES 2
5 KS1515 BOTTOM 1
6 KLG LEGS 2
7 MBT200 3/8" SLOTLESS BOLT 42
8 N201 HEX NUT 40
9 N110 DOME HEX NUT 2
10 RPE100 ESCUTCHEON PLATE 1
PG. 1

NOTE: FINGER TIGHTEN ALL NUTS, ENSURE UNIT IS SQUARE, THEN TIGHTEN ALL.
2) Bolt Top (3)
to the outside
of the side and
rear panels.
4) Insert Legs (6)
and bolt them
into the
openings
located at the
bottom of the
locker.
6
1) Bolt Side
panels (4) to
the inside of
the rear panel
(2).
3) Bolt Bottom
(5) to the insde
of rear and
side panels.
5) Place the
Frame (1) on
the locker and
bolt it on to
top, side,
bottom and
top.
4
4
2
3
5
1
PG. 2