Halma ALICAT SCIENTIFIC LCR Series Specification sheet

Download the full manual: Alicat.com/manuals
Annual Calibration •Troubleshooting •Questions
520-290-6060 • [e-mail] • Live web chat at Alicat.com
Thank you for your purchase!
+0.00
+13.49 +22.73
CCM MENU
PSIA ¤C T ARE
FLOW
Volu Flow
CCM
+0.00
I/O Port
(shape varies)
DC
In
Light
Switch
Controls
Valve
Display
Flow
Body
Process
Connections
Mounting
Holes
Bleed
Ports

1 2 3
Get Started:
This box includes:
• Alicat device
• NIST traceable calibration certificate
• Optional accessories
(cables, power adapters, filters)
Power
The power supply
input is on top. Most
devices require
1224Vdc and 40mA.
See Power and Signal
Connections in the
manual for details.
Units
Ensure the proper
units are selected.
Press the button next
to the parameter you
want to change on the
main screen, then SET
DEVICE ENG UNITS.
DOC-MANUAL-LC-QUICK
Rev   2020-07-06
Download the full manual: Alicat.com/manuals
Annual Calibration Troubleshooting Questions
Consult your Alicat manual or contact us at 520-290-6060 or [e-mail]
Tare
Before installing the
device, give your
controller a  setpoint
for at least 2 seconds,
activating the autotare
feature and zero out
(tare) your unit.
You're Ready to Connect:
5⁄64″ 8-32 Nylon-tipped
hex bleed screw
Loosen to bleed
DO NOT REMOVE
Connect the device to your process, and start the
flow of water. To remove air bubbles, (a) set the
device to its maximum setpoint, (b) gently loosen
the upstream bleed port screw, but stop when
line pressure forces liquid to leak, and (c)
tap the flow body. Do not use bleed ports
if the device is in an inverted position.
Ensure the flow direction is the same as the flow
arrow. For applications that continuously add air
bubbles, the device may be mounted upside down,
except for large valve controllers (LCR-Series).
4
5