Hamilton Beach Professional 58912-SAU User manual

GB Blender
Operation Manual
(Original Instructions) (2)
Visit https://hamiltonbeach.global for our complete
line of products and Use and Care Guides – as well as
delicious recipes, tips, and to register your product online.
AR
(16)
ZH 多功能高速破壁攪拌機
操作手冊 (30)
請訪問 https://hamiltonbeach.global ，查看我們的完
整產品系列以及使用和保養指南、美味食譜和
小貼士，並在線註冊購買的產品！ .
MS Pengisar
Manual Pengendalian (50)
Lawati https://hamiltonbeach.global untuk barisan
produk kami yang lengkap dan Panduan Penggunaan
dan Penjagaan – begitu juga dengan resipi yang sedap,
tip dan untuk daftar barang anda secara dalam talian.
FR Mélangeur
Manuel d’utilisation (66)
Rendez-vous sur le site Internet https://hamiltonbeach.global
pour consulter notre gamme complète de produits ainsi que nos
guides d’utilisation et d’entretien - vous pourrez aussi consulter
de délicieuses recettes, des astuces et enregistrer votre produit
en ligne !
Type: B79
840309400 | 03/19
Hamilton Beach Brands, Inc.
Glen Allen, VA 23060

2
IMPORTANT SAFEGUARDS
1. Read all instructions.
2. This appliance is not intended
for use by persons with
reduced physical, sensory
or mental capabilities, or
lack of experience and
knowledge, unless they
are closely supervised and
instructed concerning use
of the appliance by a person
responsible for their safety.
3. This appliance shall not be
used by children. Keep the
appliance and its cord out of
reach of children.
4. Close supervision is
necessary when any
appliance is used near
children. Children should be
supervised to ensure that they
do not play with the appliance.
5. Cleaning and user
maintenance shall not be
performed by children unless
they are supervised.
6. To protect against risk of
electrical shock, do not put
cord, plug, base, or motor in
water or other liquid.
7. Turn the appliance OFF( ),
then unplug from outlet when
not in use, before putting on
or taking off parts, and before
cleaning. To unplug, grasp
the plug and pull from the
outlet. Never pull from the
power cord.
8. Avoid contact with moving
parts.
9. Do not operate any appliance
with a damaged supply cord
or plug, or after the appliance
malfunctions or has been
dropped or damaged in
any manner. Supply cord
replacement and repairs
must be conducted by the
manufacturer, its service agent,
or similarly qualified persons
in order to avoid a hazard.
Call the provided customer
service number for information
on examination, repair, or
adjustment.
When using electrical appliances, basic safety precautions should always be
followed to reduce the risk of fire, electric shock, and/or injury to persons,
including the following:
GB

3
10. The use of attachments,
including canning jars, not
recommended or sold by
the appliance manufacturer
may cause a risk of injury to
persons.
11. Do not use outdoors.
12. Do not let cord hang over
edge of table or counter or
touch hot surfaces, including
stove.
13. Do not place on or near a hot
gas or electric burner, or in a
heated oven.
14. Keep hands and utensils out
of the jar and away from the
cutting blade, while blending
or chopping food, to reduce
the risk of severe personal
injury and/or damage to
the blender or available
attachments (attachments may
not be provided with blender).
Arubber spatula may be
used but must be used only
when blender is not running.
15. Blades are sharp; handle
carefully— especially when
emptying or cleaning the
blender jar.
16. Do not use a broken,
chipped, or cracked blender
jar.
17. Be careful if hot liquid is
poured into the blender as
it can be ejected out of the
appliance due to a sudden
steaming
18. Do not use broken, cracked,
or loose cutting blade
assembly.
19. Always operate blender
with lid in place. Remove
emulsion cup only for adding
ingredients or to insert the
tamper.
CAUTION: Do not
operate without cover in
place.
20. When blending hot liquids,
secure emulsion cup and
close any edge cover opening
intended for pouring. To
prevent possible burns: do
not exceed 1000 ml level. Hot
liquids may push off lid during
blending; therefore, with the
protection of an oven mitt or

4
thick towel, place one hand on
top of the lid, keep exposed
skin away from the lid, and
start blending at lowest speed.
21. Ensure cutter assembly is
tight and secure to jar. Injury
can result if moving blades
accidentally become exposed.
22. Do not leave blender
unattended while it is
operating.
23. Check that the appliance
is OFF ( ) before plugging
cord into wall outlet. To
disconnect, turn the control
to OFF ( ); then remove plug
from wall outlet. To unplug,
grasp the plug and pull from
the outlet. Never pull from
the power cord.
24. Do not use appliance for
other than intended purpose.
25. CAUTION! In order
to avoid a hazard due to
inadvertent resetting of the
thermal cut-off, this appliance
must not be supplied through
an external switching device,
such as a timer, or connected
to a circuit that is regularly
switched on and off by the
utility.
26. The plug is provided with a
13-amp fuse approved by
ASTA to B.S. 1362. If
you need a replacement fuse
carrier, it must be replaced
with the same colour-
coded carrier with the same
markings. Fuse covers and
carriers can be obtained from
approved service agents.
27. Do not operate more than 2
minutes ON at a time, except
during preset programs.
SAVE THESE INSTRUCTIONS

5
Other Consumer Safety Information
This product is intended for household use only.
The length of the cord used on this
appliance was selected to reduce the
hazards of becoming tangled in or tripping
over a longer cord. If a longer cord is
necessary, an approved extension cord
may be used. The electrical rating of
the extension cord must be equal to or
greater than the rating of the appliance.
The extension cord must be a grounding-
type, 3-wire cord. Care must be taken to
arrange the extension cord so that it will
not drape over the countertop or tabletop
where it can be pulled on by children or
accidentally tripped over.
If the Cutting Blade Assembly locks and
will not move, it will damage the motor.
Do not use. Call customer service number
for information.
Do not place Blender Jar in the freezer
filled with food or liquid. This can result
in damage to the Cutting Blade Assembly,
Jar, Blender, and possibly result in
personal injury.
NOTE: This machine is equipped with motor overload protection. If the motor stops
during operation due to overheating, unplug and allow it to cool down for approximately
15 minutes. Plug machine back in to resume normal operation.
Recycling the Product at the End of Its Service Life
The wheeled bin symbol marked on this appliance signifies that it
must be taken over by a selective collection system conforming to the
WEEE Directive so that it can be either recycled or dismantled in order
to reduce any impact to the environment. The user is responsible for
returning the product to the appropriate collection facility, as specified
by your local code. For additional information regarding applicable
local laws, please contact the municipal facility and/or local distributor.

6
Parts and Features
RESET/OFF (Power)
(I/ ) Switch
Blender
Jar
Base
Jar Pad
Lid
Emulsion Cup
Tamper
START/STOP
() Switch
Before first use:After unpacking the Blender, follow the instructions in “Cleaning Your
Blender.”
Cutting
Blade
Assembly
PULSE
() Switch Program
Buttons
Variable
Speed Dial
Model: 58912-SAU
Type: B79
Ratings:
220–240 V~ 50–60 Hz 1400 W

7
Parts and Features (cont.)
RESET/OFF (I/) (Power) Switch/Circuit Breaker:
The RESET/OFF (I/) (Power) Switch is located on the right-hand side of
the Blender Base. This Switch controls power to the Blender. This Switch
is also a circuit breaker that, if tripped, must be turned off and back on to
reset.
Control Panel
Emulsion Cup: The Emulsion Cup helps create dressings and sauces that require slowly
adding liquid ingredients into the Jar while the Blender is in operation.
Lid: The Lid is easy to put on, take off, and clean. Always use the Lid and the Emulsion
Cup when the machine is in operation.
Blender Jar: Volume measures are clearly marked.
Tamper: The Tamper helps mix thick or frozen recipes that cannot be processed with
regular blending. It prevents air pockets from forming and is a handy tool when making
nut butters or frozen desserts.
Automatic Overload Protection:
This machine is equipped with motor overload protection. If the motor stops during
operation due to overheating, unplug and allow it to cool down for approximately
15 minutes. Plug machine back in to resume normal operation.
PULSE ( ) Switch:
Press and hold down the PULSE ( ) Switch to blend at the speed setting
shown on the Variable Speed Dial in MANUAL mode.
Variable Speed Dial:
The center Variable Speed Dial determines
the Blender speed setting when blending in
MANUAL mode.
Program Buttons:
There are four program settings: HOT SOUP ( ), SMOOTHIE
(), ICE CRUSH ( ), and WHOLE JUICE ( ). Select the
desired program by pressing the button for that program.
START/STOP ( ) Switch:
The START/STOP ( ) Switch is used to begin or end the MANUAL
mode or to stop a program before the cycle ends.

8
Using your Blender
Before first use:After unpacking the Blender, follow the instructions in “Cleaning Your
Blender.”
IMPORTANT: The Blender Jar and Cutting Blade Assembly are subject to wear during
normal use. Always inspect Jar for nicks, chips, or cracks. Always inspect Cutting Blade
Assembly for broken, cracked, or loose blades. If Jar or Cutting Blade Assembly is
damaged, do not use.
1 2
3 4
Plug in Blender. Move the RESET/OFF
(I/) Switch to the RESET (I) position
to turn on power to the Blender and
ready it for blending. The front lights
will illuminate. Move the RESET/OFF
(I/) Switch to the OFF ( ) position
anytime the machine is left unattended.
If Blender is plugged in and Switch is in
RESET (I) position, but panel lights are
not illuminated, the Blender has entered
standby mode. This will happen after 3
minutes of inactivity. Press any control
panel button or Switch to resume normal
operation.
Place Blender Jar on Base. Add ingredients.
Place Lid and Emulsion Cup on Jar.
Insert the Cup into the Lid and secure by
turning clockwise. Remove the Emulsion
Cup to use the Tamper or to add
ingredients.

9
IMPORTANT: To remove the Lid, use your finger to pull up on the front tab. Do not twist
the Lid to take it off the Jar — this might harm the Lid material and prevent it from sealing
the Blender Jar.
How to Open Blender Lid
1
Continue to hold the front tab with your
finger and use thumb to support the Lid
until it completely opens.
Hold Jar handle firmly. To open Lid, place a finger on the front
tab.
Apply a small amount of force on Lid
until Lid is separated from the Jar.
2
3 4

10
The HOT SOUP ( )
setting purees and
heats ingredients to
just under the boiling
point. Do not blend
more than 1000ml
on this program.
When making soups,
start with cold or
room-temperature
ingredients. The
Emulsion Cup can be kept in the Lid.
Blender runs for 6 minutes, 45 seconds.
Please allow blender to cool to room
temperature before repeating cycle.
The SMOOTHIE ( )
setting blends
frozen or fresh
smoothies. Blender
pulses three times
at the beginning to
chop ice or frozen
ingredients and then
ramps up to run on
high speed. Blender
runs for total 45
seconds.
The ICE CRUSH ( )
setting breaks ice
into pieces small
enough for slushies
or fine cocktails.
Blender continuously
pulses from low
to medium for 1
minute.
When a recipe calls
for making a fruit or
vegetable juice, run
the WHOLE JUICE
() program. The
WHOLE JUICE
setting gives a
smooth consistency
to pureed fruit or
vegetables and a fine
texture when whole
grains or seeds are included in the juice
recipe. It is great for blending more fibrous
fruits and vegetables into a delicious,
healthy juice. The Blender ramps up from
low to high, running for total 55 seconds.
Using Program Settings
Programs are optimized for recipe categories and vary in blending
speed and duration. Pressing a program button illuminates only the
program selected. The Blender automatically starts when the program
button is pressed and automatically stops at the end of the program.
To stop Blender before program cycle ends, press START/STOP ( ).
Pressing the program button again will reset the program, and it will
start back from the beginning. Should you press START/STOP ( )
again, the Blender defaults to MANUAL mode.

11
Using Manual Mode
Press START/STOP ( ) and slowly
rotate the Variable Speed Dial to the right
or left during blending to increase or
decrease blending speed.
If using PULSE ( ), the Blender will run
at the speed on the dial only when the
PULSE ( ) Switch is held down.
2
WARNING Burn Hazard. Do not fill
Blender Jar with hot liquid beyond the
1000ml level. With the protection of an
oven mitt or thick towel, place one hand
on top of Lid. Keep exposed skin away
from Lid. Start blending at lowest speed.
3 – OPTIONAL
1
Remove Emulsion Cup and insert
Tamper into hole in Lid. Rotate Cup
counterclockwise from “locked” to
“unlocked” position and lift out.
NOTE: Turn Blender OFF ( ) before
removing Emulsion Cup and when
adding the Tamper.
4 – OPTIONAL
Rotate the Variable Speed Dial to 1.

12
Place one hand on top of Lid to move
thick mixtures around in Blender Jar.
6
7 8
5
At the end of the blending cycle, rotate
the Variable Speed Dial back to the
1 position and press the START/STOP
() Switch to stop blending. Turn off
the Blender with the RESET/OFF (I/)
Switch on the right side of the Base.
Unplug Blender after blending.
Remove Blender Jar. Remove Lid while holding Blender Jar
securely. Serve.
Using Manual Mode (cont.)
WARNING Burn Hazard.
Metal parts under
blending Jar get hot
after extended use.

13
• To add foods when Blender is operating,
remove Emulsion Cup and add
ingredients through the opening.
• For best performance, the minimum
amount of liquid needed per recipe is
one cup (8 ounces/237 ml). Add more
liquid if food is not blending properly.
The amount of liquid needed will vary
Based on the other ingredients required
for blending.
• If blending action stops during blending
or ingredients stick to sides of Jar,
insert Tamper to help move the mixture
around or add more liquid to Blender
Jar.
• Do not store food or liquids in Blender
Jar.
• Avoid bumping or dropping Blender
when in operation or at any time.
• Use Tamper when making nut butters
and blend in 1-minute intervals.
• Cutting large whole fruits and
vegetables may allow them to blend
more quickly.
• Do not fill Blender Jar past highest
graduation marking.
• Always place liquid in Blender Jar first,
then remaining ingredients.
• If ice or frozen fruit pieces are not
blending, stop the Blender and pulse a
few times.
• Do not allow ice to stand or freeze
in Jar. Immediately crush ice after
placing in Jar.
NOTE: This machine is equipped with
motor overload protection. If the motor
stops during operation due to overheating,
unplug and allow it to cool down for
approximately 15 minutes. Plug machine
back in to resume normal operation.
Blender Tips
Using the Tamper
• The hand protector on the Tamper and
the Lid work together to prevent the
Tamper from hitting the blades when the
Lid is secured properly on the Blender
Jar.
• The Blender Jar should not be more
than two-thirds full when the Tamper is
used during blending.
• Only use the Tamper provided with this
model Blender. Do not use Tampers
made for any other Blender or Blender
model.
• If food does not circulate, an air bubble
may be trapped in the mixture. Remove
the Blender Jar from the Blender Base.
Remove the Emulsion Cup. Release
the air bubble by inserting the Tamper
through the Emulsion Cup opening.
• Holding the Tamper straight down
may not help ingredients circulate. If
necessary, point the Tamper toward the
sides or corners of the Blender Jar. DO
NOT try to force the Tamper deeper into
the Jar.

14
Cleaning Your Blender
Wipe Blender Base, control panel, and
cord with a damp cloth or sponge. To
remove stubborn spots, use a mild,
nonabrasive cleanser.
DO NOT use the “SANI” setting when
washing in the dishwasher. “SANI”
cycle temperatures could damage your
product. Parts may also be washed
with hot, soapy water. Rinse and dry
thoroughly. Do not soak.
3 DISHWASHER-SAFE
NOTES:
• HAND-WASH ONLY. Alternative is to fill Jar halfway with water and add 2–3 drops of
dish soap. Blend for 30 seconds. Rinse and dry thoroughly.
• To clean after blending oily foods, sprinkle 1/4 cup (59 ml) baking soda in Blender. Add
1 cup (237 ml) white vinegar. Mixture will bubble. When bubbling subsides, add 2 cups
(473 ml) water and blend on the HOT SOUP ( ) cycle. Wash any remaining residue
with dish soap and water. Rinse and dry thoroughly.
1 2
Unplug Blender. Remove Jar, Lid, and Emulsion Cup.
WARNING
Electrical Shock Hazard.
Disconnect power before cleaning. Do
not immerse cord, plug, Base, or motor
in water or other liquid.
WARNING
Burn Hazard.
Metal parts under blending Jar get hot
after extended use.

15
Troubleshooting
Error Messages
PROBLEM PROBABLE CAUSE/SOLUTION
All program buttons are
flashing. • The motor has overheated during use. Turn Power Switch to OFF ( ) and allow to cool for 15 minutes. Turn Power
Switch to RESET (I), and resume normal operation.
The SMOOTHIE ( ) and
ICE CRUSH ( ) buttons
are flashing.
• Remove the Blender Jar and Lid. Stir contents and top
with Lid. Press HOT SOUP ( ) cycle. If the problem
persists, turn unit off, unplug from electrical outlet, and
contact the customer service center.
The HOT SOUP ( )
and WHOLE JUICE ( )
buttons are flashing.
• The Blender speed has ramped up to high too quickly
and run on high speed. Turn the unit off, unplug from the
electrical outlet, and call the customer service center.
Blender is plugged in and
Switch is in RESET (I)
position, but panel lights
are not illuminated.
• Blender enters standby mode after 3 minutes of inactivity
to conserve power. Press any control panel button or
Switch to resume normal operation.
NOTE: Buttons start flashing 10 seconds after a problem has occurred.

16
PROBLEM PROBABLE CAUSE/SOLUTION
Blender fails to start
and program lights are
not illuminated.
• Make sure that the main power RESET/OFF (I/) button is in
the RESET (I) position.
• Check to see if unit is securely plugged into an electrical
outlet of the proper voltage and frequency.
• Check to see if the fuse for the electrical outlet has blown or
if a circuit breaker has tripped.
Blender stops while
it is running and the
program lights are
illuminated.
• This Blender is equipped with motor overload protection.
If the motor stops during operation due to overheating,
unplug and allow the Blender to cool down. Plug Blender
back in after 15 minutes.
• Resume normal operation.
Blender stops while
running and START/
STOP () light
flashes.
• Mixture in Blender is too heavy of a load on the motor. This
Blender is programmed to stop running to protect itself from
electrical damage. Remove some of the ingredients from the
Blender Jar. Turn Variable Speed Dial to 1 and press the START/
STOP
() Switch to continue to process in MANUAL mode.
Increase speed as necessary. If this issue happens again, remove
more of the Blender mixture and start the process again.
Ingredients will not
mix properly. • Check to see if enough liquid has been added to the ingredients. Mixture should be fluid and free-running at all
times.
• SoLid pieces are too large.
• Container is too full. Do not fill past highest 1800ml
graduation marking.
• Cutting assembly blades are not sharp or are damaged.
Inspect container and Cutter Blade Assembly daily.
• Select speed to create a fluid blend.
Blender smells like it is
burning. • Turn off Blender and allow unit to cool.
• Although motors are tested during the manufacturing
process, heavy use may cause curing of motor windings.
The smell may quickly dissipate after a few heavy uses.
• If smell continues after additional heavy uses, call our
customer care center.
There is grease
around the bottom of
the Blender Jar or on
the counter top.
• Monitor the problem and source. This may indicate an issue
with the Jar bearings.
• Call our customer care center if the condition persists.
Blender Jar is cloudy
or stained. • Some cloudiness may be natural after use. The minerals
from fruits, produce, and leafy greens, in addition to the oils
of various nut butters, can sometimes cause a film on the
Blender Jar or may be difficult to clean.
• Sprinkle 1/4 cup (59 ml) baking soda in Blender. Add 1 cup
(237 ml) white vinegar. Mixture will bubble. When bubbling
subsides, add 2 cups (473 ml) water and blend on the HOT
SOUP () cycle. Wash any remaining residue with dish
soap and water. Rinse and dry thoroughly.
Blender fails to start. • Jar is not in place.
Troubleshooting (cont.)

17
Notes

19

18
AR

21





