Warnings and Precautions
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE
THIS UNIT TO RAIN OR MOISTURE. To reduce the risk of electric shock, do not remove cover (or
back). There are no user-serviceable parts inside. Please refer any servicing to qualied service
personnel.
WARNING: Changes or modications to this unit not expressly approved by the party responsi-
ble for compliance could void the user’s authority to operate the equipment.
Operations
Listening and Charging Your iPod or iPhone (Devices not included)
• Insert DC cord into back of unit in the DC 9V jack. Plug cord into wall outlet.
• Remove protective cover from dock connector before docking
• To turn the unit on, turn the ON/ VOLUME knob to the right. The POWER INDICATOR light
will illuminate.
• iPod and iPhone can be connected to docking connector with unit powered o or powered
on.
To Listen with Headphones
• Switch the SPEAKER/EARPHONE SWITCH to the EARPHONE setting.
• Plug in up to six headphones into the HEADPHONE JACKS in the front of the unit. Note –
headphones must have a 1/8”mini plug and must operate in stereo mode.
To Listen with Speakers
• Switch the SPEAKER/EARPHONE SWITCH to the SPEAKER setting.
Adjusting the Volume
• Adjust the volume by turning the ON/VOLUME knob on the unit.
• When nished listening, power o the unit by turning the ON/VOLUME knob to the far
left until you hear a click. Also the POWER INDICATOR light will turn o once the unit is
powered o.
NOTE: If your MP3 player doesn’t t on the dock, connect it via the LINE IN JACK as noted in the LINE
IN JACK section below.
• To recharge the iPod, insert the iPod onto the docking station. The iPod will recharge
automatically as long as the unit is plugged in.
• You cannot listen to both the headphones and speakers simultaneously.
Line in Jack:
• Connect a 1/8”jack stereo connection cable (not included) to the LINE IN jack on the rear of
unit to the Phones/Line out/ AUX out jack on the external device such as MP3 players, CD
players, computers and more.
1. DOCKING STATION – Compatible with
Apple devices including iPod Classic, iPod
nano, iPhone and iPodTouch.
2. POWER/ VOLUME –Turn the knob to
the right to turn the unit on; continue to
the right to increase the volume level. Turn
the knob to the left to decrease the volume.
Turn knob all the way to the left to turn the
unit o.
3. POWER INDICATOR LIGHT – When
illuminated indicates that your unit is
powered on.
4. SPEAKER/EARPHONE SWITCH – Flip-
ping the switch will activate the sound
either in the speakers or to the headphone
jacks as indicated. You cannot have sound
in both the headphone jacks and speakers
at the same time. Please note headphones
must be plugged into the unit in order to
hear sound.
5. HEADPHONE JACKS – Accepts 1/8”
stereo headphones. Up to 6 headphones
can be connected at one time.
6. LINE IN – 1/8”stereo mini jack. Use
the line in jack to connect any other audio
source including other MP3 and MP4 play-
ers, computers or CD players. Line cable not
included.
7. DC Connector – Plug in the detachable
DC cord here.
8. SPEAKERS – 2W RMS Speakers
9. DC Cord –The UL approved DC power
supply must be attached in order to provide
power
This item is not an Apple product, licensed by Apple, or authorized or approved by Apple iPod is a registered trademark of Apple Inc
Features
2 3