HAMPTON BAY SCENIC 92302 User manual

USE AND CARE GUIDE
SCENIC 52-INCH CEILING FAN
THANK YOU
We appreciate the trust and condence you have placed in Hampton Bay through the purchase of this ceiling fan. We strive to continually create
quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing Hampton Bay!
Item #1008 626 903
Model #92302
UL Model #52-VILL
To view an instructional video on how to install this product:
1. Go to www.homedepot.com and enter either the Item or Model number, found in the top
right corner of the cover of this instruction manual, in the search eld.
2. Click on your product from the list of search results and click on the video link in the
“Product Overview” section.
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday
1-855-HD-HAMPTON / HAMPTONBAY.COM
Scan for text based
customer support
Scan for online product
warranty information

2
Table of Contents ................................................................ 2
Safety Information...............................................................2
Warranty ............................................................................... 3
Pre-Installation ....................................................................3
Installation............................................................................6
Assembly..............................................................................7
Operation ...........................................................................11
Care and Cleaning.............................................................12
Troubleshooting.................................................................12
1. To reduce the risk of electric shock, ensure the electricity has been
turned off at the circuit breaker or fuse box before you begin.
2. All wiring must be in accordance with the National Electrical Code
ANSI/NFPA 70-1999 and local electrical codes. Electrical installation
should be performed by a qualied licensed electrician.
3. The outlet box and support structure must be securely mounted and
capable of reliably supporting 35 lb (15.9 kg). Use only UL Listed outlet
boxes marked “Acceptable for Fan Support of 35 lb (15.9 kg) or less.”
4. CAUTION: The fan must be mounted with a minimum of 7 ft (2.1 m)
clearance from the trailing edge of the blades to the oor.
5. Do not operate the reversing switch while the fan blades are in
motion. You must turn the fan off and stop the blades before you
reverse the blade direction.
6. Do not place objects in the path of the blades.
7. To avoid personal injury or damage to the fan and other items, use
caution when working around or cleaning the fan.
8. Electrical diagrams are for reference only. Light kits that are not
packed with the fan must be UL listed and marked suitable for use
with the model fan you are installing. Switches must be UL General
Use Switches. Refer to the instructions packaged with the light kits
and switches for proper assembly.
9. After making electrical connections, spliced conductors should be
turned upward and pushed carefully up into the outlet box. The
wires should be spread apart with the grounded conductor and the
equipment-grounding conductor on one side of the outlet box.
10. All setscrews must be checked and retightened where necessary
before installation.
WARNING: To reduce the risk of personal injury, do not
bend the blade brackets (also referred to as anges)
during assembly or after installation. Do not insert
objects in the path of the blades.
WARNING: To reduce the risk of re or electric shock,
do not use this fan with any solid-state speed control
device.
WARNING: To avoid possible electrical shock, turn the
electricity off at the main fuse box before wiring. If you
feel you do not have enough electrical wiring knowledge
or experience, contact a licensed electrician.
WARNING: Electrical diagrams are for reference only.
Optional use of any light kit shall be UL-listed and
marked suitable for use with this fan.
Safety Information
Table of Contents
CAUTION: To reduce the risk of personal injury, use only
the screws provided with the outlet box.
CAUTION: To avoid personal injury or damage to the fan
and other items, use caution when working around or
cleaning the fan.
WARNING: To reduce the risk of re, electric shock
or personal injury, mount to outlet box marked
“Acceptable for fan support of 35 lb (15.9 kg) or less”,
and use screws provided with the outlet box.
READ AND SAVE THESE INSTRUCTIONS
WARNING: To reduce the risk of re, electric shock or
injury to persons, do not use replacement parts that
have not been recommended by the manufacturer (e.g.
parts made at home using a 3D printer).

3HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Pre-Installation
Warranty
The supplier warrants the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a
lifetime after the date of purchase by the original purchaser. The supplier warrants that the light kit, excluding any glass, to be free from defects in
workmanship and material at the time of shipment from the factory for a period of three years after the date of purchase by the original purchaser.
The supplier also warrants that other fan parts, excluding any glass or acrylic blades, to be free from defects in workmanship and material at the
time of shipment from the factory for a period of one year after the date of purchase by the original purchaser. We agree to correct such defects
without charge or at our option replace with a comparable or superior model if the product is returned. To obtain warranty service, you must present
a copy of the receipt as proof of purchase. All costs of removing and reinstalling the product are your responsibility. Damage to any part, such as by
accident, misuse, improper installation, or by afxing any accessories, is not covered by this warranty. Because of varying climatic conditions this
warranty does not cover any changes in brass nish, including rusting, pitting, corroding, tarnishing, or peeling. Brass nishes of this type give their
longest useful life when protected from varying weather conditions. A certain amount of “wobble” is normal and should not be considered a defect.
Servicing performed by unauthorized persons shall render the warranty invalid. There is no other express warranty. Hampton Bay hereby disclaims
any and all warranties, including but not limited to those of merchantability and tness for a particular purpose to the extent permitted by law. The
duration of any implied warranty, which cannot be disclaimed, is limited to the time period as specied in the express warranty. Some states do not
allow a limitation on how long an implied warranty lasts, so the above limitation may not apply to you. The retailer shall not be liable for incidental,
consequential, or special damages arising out of or in connection with product use or performance except as may otherwise be accorded by law.
Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion or limitation may not apply to you. This
warranty gives specic legal rights, and you may also have other rights that vary from state to state. This warranty supersedes all prior warranties.
Shipping costs for any return of product as part of a claim on the warranty must be paid by the customer.
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.HamptonBay.com.
SPECIFICATIONS
TOOLS REQUIRED
NOTE: These are approximate measures. They do not
include the amps and wattage used by the light kit.
Phillips
screwdriver
Flat blade
screwdriver
Adjustable
wrench
Electrical
tape
Wire
cutter
Step ladder
Size Speed Volts Amps Watts RPM CFM Net
Weight
Gross
Weight Cubic Feet
52 in.
Low
Medium
High
120
0.22
0.34
0.49
12
29
59
60
105
160
1909
3087
4447
14.55 lb
(6.6 kg)
19.33 lb
(8.77 kg) 1.24 cu. ft.

4
Part Description Quantity
AA Blade attachment screw 13
BB Plastic wire connector 3
CC Pull chain 2
DD Center band screw 1
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
Pre-Installation (continued)
AA BB CC DD

5HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Part Description Quantity
AMounting plate (pre-installed on motor
housing) 1
B Fan-motor assembly 1
C Motor housing 1
D Center band 1
Part Description Quantity
E Blade 4
F Light kit pan 1
G Light kit tter 1
HGlass shade 1
IMPORTANT: This product and/or components are
governed by one or more of the following U.S. Patents:
5,947,436; 5,988,580; 6,010,110; 6,046,416, 6,210,117
and other patents pending.
PACKAGE CONTENTS
Pre-Installation (continued)
A
C
B
D
E
F
G
H

6
Installation
MOUNTING OPTIONS
WARNING: To reduce the risk of re, electric shock or
personal injury, mount to outlet box marked “Acceptable
for fan support of 35 lb (15.9 kg) or less”, and use
screws provided with the outlet box. An outlet box
commonly used for the support of lighting xtures may
not be acceptable for fan support and may need to be
replaced. If in doubt, consult a qualied electrician.
If your ceiling fan does not have an existing UL-listed mounting
box, then install one using the following instructions:
□Disconnect the power by removing the fuses or turning off
the circuit breakers.
□Secure the outlet box directly to the building structure. Use
the appropriate fasteners and materials. The outlet box and
support structure must be securely mounted and capable of
reliably supporting 35 lb (15.9 kg). Use only UL Listed outlet
boxes marked “Acceptable for Fan Support of 35 lb (15.9 kg)
or less.” Do not use a plastic outlet box.
The illustrations below show two different ways to mount the
outlet box.
To hang your fan where there is an existing xture but no ceiling joist,
you may need an installation hanger bar as shown above
(available at any Home Depot store).
Outlet Box
Outlet Box
Outlet Box
Hanger Bar

7HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Assembly - Hanging the Fan
Attaching the fan to the
electrical box
□Turn the power off.
□Loosen the two mounting screws (GG) supplied with the
outlet box (FF), but do not remove.
□Securely attach the mounting plate (A) to the outlet box (FF)
by sliding the mounting plate (A) over the two mounting
screws (GG) supplied with the outlet box. Pull the 120-volt
supply wires through the hole in the mounting plate (A) and
lay them to the side.
□Securely tighten the two mounting screws (GG).
2
NOTE: For better fan performance, make sure the
mounting plate is level. Additional washers (HH) (not
included) may be needed to insert between the outlet box
and mounting plate.
Remove the mounting plate
from the motor assembly
□Remove the mounting plate (A) from the fan motor housing
(C) by removing all three screws (SS) from the round holes.
This will enable you to remove the mounting plate (A).
1
C
SS
A
120V Wires
A
G
G
FF
HH

8
Making the electrical connection
4
□Connect the fan motor green wires to the household green or
bare wire using a wire connecting nut (BB).
□Connect the fan motor white wire to the household white wire
using a wire connecting nut (BB).
□Connect the fan motor black and blue wires to the household
black wire using a wire connecting nut (BB).
□Secure each wire connecting nut using electrical tape.
□Turn the wire connecting nut (BB) upward and push the wiring
into the outlet box (FF).
IMPORTANT: Use the plastic wire connectors (BB) supplied with
your fan. Secure the connectors with electrical tape and ensure
there are no loose strands or connections.
WARNING: Each wire nut supplied with this fan is designed to
accept up to one 12-gauge house wire and two wires from the
fan. If you have larger than 12-gauge house wiring or more
than one house wire to connect to the fan wiring, consult an
electrician for the proper size wire nuts to use.
Hanging the fan-motor assembly
□Carefully lift the fan motor assembly (C) and engage the
slot in the motor bracket on the top of the fan motor
assembly (C) with the hook on the mounting plate (A) so
that it is securely suspended. Then connect the wiring
to your fan according to step 4 “Making the Electrical
Connections”.
3
□Once the wiring is complete, lift the motor bracket on the
top of the fan motor assembly (B) up to the mounting plate,
remove the screw (JJ) from the mounting plate (A) on the
side of round hole and loosen but do not remove the other
three screws.
□Push the fan motor assembly to the left so that the three
loosened screw heads t into the slots.
□Reinstall the screw (JJ) removed in the rst step and
tighten all the screws.
Assembly - Hanging the Fan (continued)
A
B
Outlet box
(FF)
Green or bare wire
Green
White Black & Blue
B
A
JJ
A
B

9HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Assembly - Hanging the Fan (continued)
Attaching the motor housing
□Align the three holes on the top of the motor housing C)
with the three holes on the mounting plate (A). Push the
motor housing (C) up.
□Install the three screws that were removed in step 1 into
the three holes and tighten all screws rmly.
5
A
C
B
Attaching the center band to
motor assembly
□Fasten the center band (D) to the motor housing (C)
by inserting the alignment posts into the slot on the
bottom of the motor housing and tightening the four
pre-installed screws (DD).
6
Assembly - Attaching the Fan Blades
Attaching the fan blades
□Attach a blade (E) to the fan-motor assembly by inserting the
blade (E) into the slots in the side of the fan center band (D)
and aligning the three screw holes in the blade with the holes
in the center band and secure with screws (AA).
□Make sure all the screws are rmly tightened.
□Repeat these steps for the remaining blades.
1
C
D
E
AA
C
D
DD

10
Assembly - Attaching the Light Kit Fitter Assembly
Installing the light kit pan
□Remove one screw (PP) from the black bracket below the
fan motor assembly (B), and loosen but do not remove the
other two screws.
□Push the 9-pin connectors of the motor assembly through
the hole of the light kit pan (F).
□Connect the wires from the light kit pan (F) to the wires
from the fan motor assembly (B) by connecting the 9-pin
connectors together. Carefully tuck all wires and splices into
the switch cup.
□Push the light kit pan (F) up to the fan motor assembly (B) so
that the two loosened screw heads t into the keyhole slots.
Turn the light kit pan (F) clockwise. Re-install the screw (PP)
that was removed in step 1.
□Make sure all the screws are rmly tightened.
1
CAUTION: To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before installing the
light kit pan.
IMPORTANT: It is critical to attach the light kit pan (F)
using the quick connector. The fan will not operate
unless the light kit pan (F) is connected to the fan.
B
F
PP
Attaching the light kit tter
assembly
□Remove one screw (QQ) from the light kit pan (F) and loosen, but
do not remove the other two screws.
□Connect the wires from the light kit tter assembly (G) to the
wires from the fan motor assembly (B) by connecting the molded
adaptor plugs together. Carefully tuck all wires and splices into
the switch cup.
□Push the light kit tter assembly (G) up to the light kit pan (F)
so that the two loosened screw heads t into the keyhole slots.
Turn the light kit tter assembly (G) clockwise to secure.
□Re-install the screw (QQ) that was removed in step 1.
□Make sure all the screws are rmly tightened.
2
G
E
F
QQ