HAMPTON BAY 176-411-GLD User manual

THANK YOU
Thank you for choosing Hampton Bay!
USE AND CARE GUIDE
OAK CLIFF STAMPED BACK GLIDER
1-855-HD-HAMPTON
Item # 739 164
Model #176-411-GLD
ually create quality
products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
HAMPTONBAY.COM
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8.00 a.m. - 7.00 p.m. EST, Monday - Friday,
9.00 a.m. - 6.00 p.m. EST, Saturday

2
Table of Contents
Safety Information
DANGER: Please keep children out of the assembly area
during assembly.
WARNING: Do not sit on the armrests or stand on the seat.
CAUTION: Use the
IMPORTANT: Please check the tightness of bolts
periodically.
Warranty
TW0 YEAR FRAME AND FABRIC LIMITED WARRANTY
WHAT IS COVERED
WHAT IS NOT COVERED
It remains the customer’s responsibility for freight and packaging charges to and from our service center. This warranty does not cover
We reserve the right to make substitutions with similar merchandise, if the model in question is no longer in production.
Before using, wipe with a clean, dry cloth. Do not use bleach or solvents. Treat the frame with liquid wax for maximum protection against UV
light and salty, damp air. When not in use, store the furniture in a cool, dry place. If your set includes cushions or mesh fabric, they may be
cleaned by hand with a mild solution of soap and water. Rinse the cushions thoroughly and allow to drip dry. Do not machine wash or tumble
dry, as cushions may shrink. Do not use bleach or solvents on fabrics.
You may contact our customer service department with any questions by phone at 1-855-HD-HAMPTON or visit www.hamptonbay.com.
Table of Contents........................................................2
Safety Information.......................................................2
Warranty ...................................................................... 2
2............................ytnarraWdetimiLcirbaFdnaemarFraeYTwo
Pre-Assembly ............................................................3
Planning Assembly... ................................................................3
Hardware Included.................................................................. 3
Package Contents ....................................................................4
Assembly ....................................................................5
................................................................ 2
What Is Covered
What Is Not Covered ................................................................ 2..
.... ..
................................................................ 2
Care Instructions.. ..
Care Instructions
two years.anda

3
Please contact 1- 855-HD-HAMPTON for further assistance.
Pre-Assembly
YLBMESSAGNINNALP
It will take two people about 25 minutes to complete the assembly process.
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
Part Description Quantity
AA
23
BB
4
Bolt cap (M6)
AA BB CC
CC
4
HAMPTONBAY.COM
DD
Bolt (M6x30)
6
DD
EE 1
FF GG HH
II JJ
Part Description Quantity
KK
4
LL
4
Plastic washer (5mm thick)
MM Hex wrench 1
NN 1
FF
2
Spanner
Bolt (M6x35)
Bolt (M6x40)
Bolt (M6x45)
Nut (M6)
Plastic washer (10mm thick)
EE
KK LL
MM NN
GG
6
HH
14
Washer (M6)II 37
JJ 14Nut cap (M6)
Bolt (M6x50)
Bolt (M6x55)

4
Pre-Assembly (continued)
PACKAGE CONTENTS
A
B
C
D
E
F
H
Part Description Quantity
A
1
B
1
Back panel
C
1
D
Seat panel
1
E2
F
2
Right armrest
Left armrest
Leg
H - shaped cross bar
G
2
I- shaped cross bar
I
G
H
2
Back cushion
I
2
Seat cushion

5
Assembly
1 Assembling the chair base
2 Attaching the glider bearing arms
□Attach the glider bearing arms (1) of the H - shaped cross
bars (F) to the outside of the chair base with washers (II),
plastic washers (KK), bolts (FF) and nuts (HH)
using spanner (NN) and hex wrench (MM). (Fig.2)
□
Please contact 1-855-HD-HAMPTON for further assistance.
HAMPTONBAY.COM
AA
DD
II
II
HHJJ
MM
NN
AA
DD
II MM
II
HH
NN
JJ
Join the two chair legs (E) with two cross bars (G) with
twelve washers (II), six bolts (DD) and six nuts (HH)
using spanner (NN) and hex wrench (MM). (Fig.1)
E
E
G
Keep the arrow marked holes
empty until Step 2.
JJ HH II
AA
GG
II
F
F
KK
AA
FF
II
JJ HH II
1
1
□Fully tighten all bolts and nuts once all bolts and nuts
are in place.
□Cover all bolts with bolt caps (AA). Cover all nuts with
nut caps (HH). (Fig. 1 & Fig. 2)
(Fig.1)
(Fig.2)
KK
IMPORTANT:
Do not fully tighten bolts until the end of step 2.
NN

6
Assembly (continued)
3Attach armrests
□Attach armrests (C) and (D) to the seat panel (B) with washers (II) and bolts (BB) using hex wrench (MM). (Fig .3)
Do not fully tighten bolts until the end of step 4.
AAAA
BCB
I I
FRONT REAR
B
C
B
D
4Attach the back panel
□Attach the back panel (A) to armrests (C) and (D) with washers (II) and bolts (CC) using hex wrench (MM). (Fig. 4.1)
Secure the back panel (A) to the seat panel (B) with washer (II) and bolt (EE) using hex wrench (MM). ( Fig. 4.2)
□
Fully tighten all bolts (BB), (CC) and (EE) when all bolts are in place.
□
Cover all bolts (BB), (CC) and (EE) with bolt caps (AA). (Fig. 3, Fig. 4.1 and Fig 4.2)
Fig. 3
II CC AA
II CC AA
A
AA
EE
II
Fig. 4.1
A
B
Fig. 4.2
IMPORTANT: Place the angled side of the seat panel (B)
to the rear of the frame.
C
D

7
Assembly (continued)
5Joining the chair seat and the chair base
□Secure the armrests onto the glider bearing arms (1) with washers (II), bolts (GG), plastic washers (LL) and nuts (HH).
Fully tighten all bolts and nuts when all bolts and nuts are in place.
Cover all bolts (GG) with bolt caps (AA), cover all nuts (HH) with nut caps (JJ).
II GGAA
II
JJ HH
1
□
□
FRONT BACK
6Placing cushions on the glider
□Place cushions (H and I) on the glider loveseat. Secure seat cushions (I) on the frame.
LL
H
I
** Firstly identify the front and back side of the assembled base.
NOTE: You will need at least two people for this step.

Retain this manual for future use.
1-855-HD-HAMPTON
HAMPTONBAY.COM
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8.00 a.m. - 7.00 p.m. EST, Monday - Friday,
9.00 a.m. - 6.00 p.m. EST, Saturday