HAMPTON BAY FRS60752B-STBC User manual

THANK YOU
quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing Hampton Bay!
y through the purchase of this dining chair. We strive to continually create
USE AND CARE GUIDE
FERNLAKE STEEL WICKER 4PK DINING CHAIR - BARE
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service.
8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
Item #0000 000 000
Model # FRS60752B-STBC

2
Table of Contents
Pre-Assembly ................................................................3
Planning Assembly .................................................................. 3
Hardware Included .................................................................. 3
Care and Cleaning...................................................... 6..
Important Safety Instructions
SAVE THESE INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
Chair Assembly ............................................................. 5
Chair Package Contents .......................................................... 4
Important Safety Instructions ................................... 2
Save These Instructions ........................................................2
WARNING: Weight limit for the chairs is 250 lbs
(113.39 kg) for each seat.
Read All Instructions Before Use .............................................. 2
WARNING: Do not place heavy objects on the chairs.
Table of Contents ........................................................2
WARNING: This dining chair was made for the explicit purpose of providing outdoor functions and is not to be used as a toy.
This product is intended for normal outdoor use; however, the manufacturer recommends storing and / or covering this product
when any formidable / severe weather is approaching.
W
product. Children under the age of 10, near the product, should be supervised by a competent adult at all times. This product is
NOT intended for commercial use and will void the warranty.
To reduce the risk of injury to persons:
1. Close supervision is necessary when this product is used by or
near children, or disabled persons, if applicable.
3. Do not move the chairs while the chairs are occupied. Failure
to obey this caution could result in injury.
CAUTION: When not in use, secure the product in a
cool and covered location.
!
Warranty .........................................................................3
What is Covered .......................................................................3
What is Not Covered .................................................................3
2. Use this product only for its intended use as described in these
instructions. Do not use attachments not recommended by the
manufacturer.

3
Pre-Assembly
PLANNING ASSEMBLY
Read all instructions before assembly.
To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard.
NOTE: More than one person may be required to
assemble this product.
HARDWARE INCLUDED
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
NOTE: Hardware not shown to actual size.
Part Description Quantity
AA M6x20 combination bolt 48+1
BB Hex wrench 1
BB
AA
Warranty
WHAT IS NOT COVERED
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.HamptonBay.com.
It remains the customer’s responsibility for freight and packaging charges to and from our service center. This warranty does not cover
s warranty. We
reserve the right to make substitutions with similar merchandise, if the model in question is no longer in production.
2 YEAR FRAME LIMITED WARRANTY
WHAT IS COVERED
We warrant the frames to be free of manufacturing defects to the original purchaser for two years.

4
Pre-Assembly (continued)
CHAIR PACKAGE CONTENTS
Part Description Quantity
A Seat 4
B Front Leg 8
C Left Rear Leg 4
D Right Rear Leg 4
E Seat Cushion 4
E
BDC
A
B

1
l
5
Chair Assembly
ATTACHING THE FRONT LEG, LEFT REAR LEG AND RIGHT REAR LEG TO THE SEAT
Place the seat (A) upside down on a soft surface.
Attach the front legs(B), left rear leg (C), and right rear leg (D) to the seat (A) using M6x20 combination bolts(AA).
NOTE: Loosely tighten all bolts using the hex wrench (BB).
A
C
D
AA
AA
AA
B