HAMPTON BAY GENEVA FWS60610A User manual

THANK YOU
USE AND CARE GUIDE
GENEVA 18X18IN SIDE TABLE
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
Item # 1005 442 747
Model # FWS60610A
We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this table. We strive to continually create quality
products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing Hampton Bay!

2
Important Safety Instructions
SAVE THESE INSTRUCTIONS
WARNING: THIS TABLE WAS MADE FOR THE EXPLICIT PURPOSE OF PROVIDING OUTDOOR FUNCTIONS AND IS NOT TO BE USED AS A TOY.
THIS PRODUCT IS INTENDED FOR NORMAL OUTDOOR USE; HOWEVER, THE MANUFACTURER RECOMMENDS STORING AND/OR COVERING THIS
PRODUCT WHEN ANY FORMIDABLE/SEVERE WEATHER IS APPROACHING.
READ ALL INSTRUCTIONS BEFORE USE
To reduce the risk of injury to persons:
1. Close supervision is necessary when this furnishing is used by
or near children, or disabled persons, if applicable.
2. Use this furnishing only for its intended use as described in
these instructions. Do not use attachments not recommended by
the manufacturer.
WARNING: DO NOT LOCATE THIS PRODUCT NEAR OPEN FLAMES. DO NOT USE THIS PRODUCT AS A SUPPORT. DO NOT SHAKE, LEAN OR CLIMB
ON THE PRODUCT. CHILDREN UNDER THE AGE OF 10, NEAR THE PRODUCT, SHOULD BE SUPERVISED BY A COMPETENT ADULT AT ALL TIMES.
THIS PRODUCT IS NOT INTENDED FOR COMMERCIAL USE AND WILL VOID THE WARRANTY.
WARNING: This table is heavy, and may
require two adults for safe assembly.
WARNING: Never use this product as a support. Do not
shake, lean, or climb on the product at any time.
WARNING: Do not place heavy objects on the table.
WARNING: Please keep children out of the assembly
area before assembly.
CAUTION: When not in use, secure the product in a
cool and covered location.
CAUTION: Do not locate the product near any heat
sources.
Table of Contents
Pre-Assembly.................................. . . . . . 3
Planning Assembly ............................ . . . . . 3
Hardware Included ............................ . . . . . 4
Package Contents . ............................ . . . . . 4
Assembly. . . . . . ................................. . . . . 5
Table of Contents.............................. . . . . . . 2
Important Safety Instructions ...................... . . . . 2
What is covered ................................... 3
What is not covered ................................3
Warranty .............................. . . . . . . . . . . . . 3
Save These Instructions..............................2
Read All Instructions before Use .................... . . . 2
Care and Cleaning ............................. . . . . . . 6
Please keep children out of the assembly area before assembly.
3.

3 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Warranty
Pre-assembly
PLANNING ASSEMBLY
Read all instructions before assembly.
To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard.
NOTE: More than one person may be required to assemble this product.
3 YEAR FRAME LIMITED WARRANTY
WHAT IS COVERED
We warrant the frames to be free of manufacturing defects to the original purchaser for three years.
WHAT IS NOT COVERED
It remains the customer’s responsibility for freight and packaging charges to and from our service center. This warranty does not cover
s warranty.
We reserve the right to make substitutions with similar merchandise, if the model in question is no longer in production.
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.HAMPTONBAY.com.

4
Pre-assembly (continued)
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
PACKAGE CONTENTS
AA BB CC DD
M6x30 Combination Bolt
M8x50 Combination Hex Bolt
4+1
4+1
AA
BB
Hex Wrench 1 CC
Wrench 1 DD
Part Description Quantity
Table Top
Shelf
Table Leg 1
1
1
2
A
B
C
Table Leg 2 2 D
Part Description Quantity
A
B
C
D

5 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Assembly
1Connecting The Table Legs To The Table Top
2Connecting The Shelf To The Table Legs
Place the table top (A) upside down on a soft surface.
Connect the table legs (C&D) to the table top (A)
using M8x50 combination hex bolts (BB).
Connect the shelf (B) to the table legs (C&D) using
M6x30 combination bolts (AA).
NOTE: Loosely tighten all bolts using the hex wrench (CC).
NOTE: Loosely tighten all bolts using the wrench (DD).
A
C
C
D
D
BB
C
C
D
D
B
AA

6
Assembly (continued)
3Tightening All The Bolts
Once all of the bolts are in place, fully tighten all the bolts.
Turn the table right side up.
Ensure all connections are secure before use.
Store the table in a dry sheltered place when not in use.
.
Care
For best results, clean the framewith a damp cloth and dry thoroughly. This will help prevent mildew by removing dirt
particles that may accumulate.
Do not clean with abrasive materials, bleach or solvents.
Care and Cleaning

Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
Retain this manual for future use.
For certification use only
Factory Table ID #FWS60610A