HAMPTON BAY HAYMONT FRS80961-ST-CH User manual

USE AND CARE GUIDE
HAYMONT STEEL WICKER 6-PC DINING CHAIR SET
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
Item # 1006 318 350
Model # FRS80961-ST-CH
THANK YOU
We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this chair set. We strive to continually
create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement
needs. Thank you for choosing Hampton Bay!
1-855-HD-HAMPTON
HAMPTONBAY.COM

2
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
WARNING: THIS CHAIR SET WAS MADE FOR THE EXPLICIT PURPOSE OF PROVIDING OUTDOOR FUNCTIONS AND IS NOT TO BE USED AS A
TOY. THIS PRODUCT IS INTENDED FOR NORMAL OUTDOOR USE; HOWEVER, THE MANUFACTURER RECOMMENDS STORING AND/OR COVERING
THIS PRODUCT WHEN ANY FORMIDABLE/SEVERE WEATHER IS APPROACHING.
READ ALL THE INSTRUCTIONS BEFORE
USE
To reduce the risk of injury to persons:
1. Close supervision is necessary when this furnishing is used by or
near children, or disabled persons, if applicable.
2. Use this furnishing only for its intended use as described in these
instructions. Do not use attachments not recommended by the
manufacturer.
3. Do not move achair while it is occupied. Failure to obey this
caution could result in injury.
WARNING: DO NOT LOCATE THIS PRODUCT NEAR OPEN FLAMES. DO NOT USE THIS PRODUCT AS A SUPPORT. DO NOT SHAKE, LEAN OR CLIMB
ON THE PRODUCT. CHILDREN UNDER THE AGE OF 10, NEAR THE PRODUCT, SHOULD BE SUPERVISED BY A COMPETENT ADULT AT ALL TIMES.
THIS PRODUCT IS NOT INTENDED FOR COMMERCIAL USE AND WILL VOID THE WARRANTY.
WARNING: Thechairsare heavy, and
may require two adults for safe assembly.
WARNING: Never use this product as a support. Do not
shake, lean, or climb on the product at any time.
WARNING: Do not place heavy objects on the chairs.
WARNING: The weight limit for each chair
is 250 lbs (113.39 Kg).
WARNING: Please keep children out of the assembly
area before assembly.
CAUTION: When not in use, secure the product in a
cool and covered location.
CAUTION: Do not locate the product near any heat
sources.
TABLE OF CONTENTS
Pre-Assembly................................ . . . . . . . 3
Planning Assembly .......................... . . . . . . . 3
Hardware Included .......................... . . . . . . . 4
Stationary Chair Package Contents . . . . . . . . . . . . . . .. .. . . . . 4
Swivel Chair Package Contents . . . . . . . . . . . . . . . . . .. .. . . . . 5
Swivel Chair Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Stationary Chair Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Table of Contents............................ . . . . . . . . 2
Important Safety Instructions .................... . . . . . . 2
What is covered ............................ . . . . . . . 3
What is not covered ................................3
Warranty ............................ . . . . . . . . . . . . . . 3
Save These Instructions..............................2
Read All Instructions before Use .................. . . . . . 2
Care and Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

3
WARRANTY
PRE-ASSEMBLY
PLANNING ASSEMBLY
Read all the instructions before assembly.
To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard.
NOTE: More than one person may be required to assemble this product.
s warranty.
3 YEAR FRAME AND 3 YEAR FABRIC LIMITED WARRANTY
WHAT IS COVERED
We warrant the frames to be free of manufacturing defects to the original purchaser for three years, and a three-year limited warranty for
the fabric.
WHAT IS NOT COVERED
It remains the customer’s responsibility for freight and packaging charges to and from our service center. This warranty does not cover
We reserve the right to make substitutions with similar merchandise, if the model in question is no longer in production.
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.HAMPTONBAY.com.
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.

4
PRE-ASSEMBLY (continued)
HARDWARE INCLUDED NOTE: Hardware is not shown to actual size.
STATIONARY CHAIR PACKAGE CONTENTS
AA BB CC DD
M8x20 Combination Hex Bolt
Hand Knob
8+1
12+1
AA
BB
Hex Wrench 1 CC
Wrench 1 DD
Part Description Quantity
Chair Bucket
Chair Base
Seat Cushion
4
4
4
A
B
C
Part Description Quantity
C
B
A

5
PRE-ASSEMBLY (continued)
SWIVEL CHAIR PACKAGE CONTENTS
Seat Cushion
Swivel Chair Bucket
Support Tube
2
2
2
C
D
E
Swivel Base 2 F
Part Description Quantity
C
F
E
D
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.

6
STATIONARY CHAIR ASSEMBLY
1Attaching the Chair Base to the Chair Bucket
2Tightening all the Hand Knobs
Place the chair bucket (A) upside down on a soft surface.
Attach the chair base (B) to the chair bucket (A) using the hand knobs (BB).
Once all of the hand knobs (BB) are in place, fully tighten all the hand knobs (BB) using the hex wrench (CC).
Turn the chair right side up.
Put the seat cushion (C) on the chair.
Ensure all the connections are secure before use.
NOTE: Loosely tighten all the combination bolts (AA) using the hex wrench (CC).
A
B
BB
C

7
CARE AND CLEANING
For best results, clean the frame and fabric with a damp cloth and dry thoroughly. This will help prevent mildew by removing dirt
particles that may accumulate.
Do not clean with abrasive materials, bleach or solvents.
Store the product in a dry sheltered place when not in use.
Keep the product away from fire, extreme heat, freezing conditions, and inclement weather such as rain, hail, sleet, snow, or wind.
SWIVEL CHAIR ASSEMBLY
1Attaching the Support Tube to the Swivel Chair Bucket
Place the swivel chair bucket (D) upside down on a soft surface.
Attach the support tube (E) to the swivel chair bucket (D) using the M8X20 combination hex bolts (AA).
NOTE: Loosely tighten all the combination bolts (AA) using the wrench (DD).
2Tightening all the Bolts
Once all of the combination bolts (AA) are in place, fully tighten
all the combination bolts using the wrench (DD).
Turn the chair right side up.
Insert the support tube (E) into the swivel base (F).
Put the seat cushion (C) on the chair.
Ensure all the connections are secure before use.
D
E
AA
AA
E
F
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
C

Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-HAMPTON
Retain this manual for future use.
For certification use only
Factory stationary chair ID # FRS80961
Factory swivel chair ID # FRS80961S
HAMPTONBAY.COM