HAMPTON BAY ORLEANS FRN-801960-S2-2 User manual

THANK YOU
quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing Hampton Bay!
SKU# 100 749 0542
Model# FRN-801960-S2-2
USE AND CARE GUIDE
ORLEANS SECTIONAL - CORNER AND TABLE
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
seat and table

2
DANGER: Keep children out of the assembly area during
assembly.
CAUTION: DO NOT use pressure cleaning machines when
cleaning your furniture or you will damage the structure of
the wood.
CAUTION: DO NOT place hot objects directly on the wood
surface to prevent damage to the wood.
CAUTION: DO NOT use sharp equipment such as a knife
and scissors when removing the protective material as it
may damage product.
WARNING: Do not stand on this chair.
Important Safety information
Warranty
TWO YEAR LIMITED WARRANTY
WHAT IS COVERED
The frame is warranted to be free of manufacturing defects for two years from the purchase date. If the frame of your furniture fails (ie.
broken frame or weld) within 2 years of ownership, Hampton Bay will repair, provide replacement parts, or replace the product at our
warranty only. Warranty is void when product is used for commercial settings. This warranty is a limited warranty and applies to the original
purchase only. Proof of purchase is required.
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.HAMPTONBAY.com.
READ ALL INSTRUCTIONS BEFORE USE
To reduce the risk of injury to persons:
1. Close supervision is necessary when this furnishing is used by or
near children, or disabled persons, if applicable.
2. Use this furnishing only for its intended use as described in
these instructions. Do not use attachments not recommended by
the manufacturer.
SAVE THESE INSTRUCTIONS.
Due to the expansion and contraction of the wood caused by weather,
we recommend re-tightening all of the hardware two weeks after
assembly. Periodic checking of all connections and
hardware is also advised.
Table of Contents
Safety Information .................................. 2
Warranty .......................................... 2
Pre-assembly .................................. . . . . 3-4
Hardware Included................................. 3
Package Contents ................................. 4
Assembly ...................................... . . 5-9
Care and Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
2 years

3 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Pre-assembly
PLANNING ASSEMBLY
Before beginning the assembly of this product, make sure all parts are present. Compare parts with Package Contents and Hardware
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
Part Description Quantity
AA Screw M6x50 2
BB Screw M7x70 4
CC Allen Key 2
DD Screw M7x110 2
EE Screw M7x80 2
FF Screw M6x40 4
GG Bolt M8x70 2
HH Bolt M8x60 2
II Bolt M8x50 3
JJ Nut M8x18 7
MM Cap 24
Assembly requires two people.
Included lists. If any part is missing or damaged, do not attempt to assemble the product, and return it to the place of purchase.
AA BB CC DD EE FF
GG HH II JJ MM

4
Pre-assembly (continued)
PACKAGE CONTENTS
Part Description Quantity
A Table Top 1
B Bar Connect 1
C Table Legs Frame 2
M Backrest Frame R 1
N Backrest Frame L 1
O Side Leg R 1
P Side Leg L 1
Q Seat Frame 1
R Seat Cushion 1
S Back Cushion R 1
T Back Cushion L 1
A B C M
N O P Q
R S T

5 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Corner Bench Assembly
1Attaching both Backrest
Frames Together
Attach the Backrest Frame R (M) to the Backrest Frame L
(N) by using the Bolt M8x50 (II), Nut M8x18 (JJ), and Allen
Key (CC), then use the Allen Key (CC) to secure.
Do not fully tighen all the bolts in this step.
2Attaching Legs and Seat to
Backrest Frames
Attach the Side Leg R (O) to the Backrest Frame (N) by
using the Screw (DD), Bolt M8x60 (HH), Bolt M8x70 (GG),
Nut M8 (JJ), and Allen Key (CC). Then use the Allen Key (CC)
to secure.
Do not fully tighen all the bolts in this step.
MN
JJ II
O
DD
HH
JJ
GG
JJ
N

6
Corner Bench Assembly (continued)
3Attaching the Side Leg
Put the Seat Frame (Q) and the Side Leg L (P) to the assembled
Backrest Frame (M&N).
Attach the Side Leg L (P) to the assembled frame, by
using the Screw M7x110 (DD), Screw M7x80 (EE), Bolt
M8x60 (HH), Bolt M8x70 (GG), Nut M8 (JJ) and Allen Key
(CC), then use the Allen Key (CC) to secure.
Do not fully tighen all the bolts in this step.
4Attaching the Seat into the Frame
Attach the Seat (Q) to the assembled frame, by using the
Bolt (FF), then use the Allen Key (CC) to secure.
Fully tighten all the bolts for this corner bench.
Use Cap (MM) to cover all exposed bolts.
DD
EE
Q
P
FF
FF
MM
MM
DD
GG
HH
EE JJ
NMNM
Q

7 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Corner Bench Assembly (continued)
5Completing the Assembly
Place the corner seat
Seat Cushion (R), Back Cushion R (S) and Back Cushion L
(T) on the bench.
leveling feet if the four legs are not level.
The Corner bench is ready to use now.
6Connecting the Right Bench and Left
Bench to the Corner (Optional)
sectional set, you can use 4straps (1) to connect the
Right Bench and Left Bench to The Corner Seat (example
shown below)
R
ST
R
ST
1

8
Coffee Table Assembly
1Attaching the Legs to the Table Top
Attach the Table Leg Frame (C) to the Table Top (A) by
using the Screw M7x70 (BB) then use the Allen Key (CC) to
secure.
2Attaching the Table Leg Frame and
Bar Connect
Attach the Table Leg Frame (C) and the Bar Connect (B) to
the assembled frame, by using the Screw M7x70 (BB), and
Screw M6x50 (AA), then use the Allen Key (CC) to secure.
Use Cap (MM) to cover all exposed bolts.
BB
A
C
BB
C
B
BB
AA
BB
AA
MM

9 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Coffee Table Assembly (continued)
3Completing the Assembly
Adjust the plastic leveling feet if the four legs are not level.
The table is ready to use now.

Care and Cleaning
Always make certain to cover your outdoor wood furniture with waterproof covers when you are not using it. Using covers will protect your
furniture from all weather elements and prolong the life of the wood furniture. Do not use plastic covers to protect your furniture as this
may cause mold to grow on your furniture.
This furniture has been treated with a PU (polyurethane) protectant during production; however, all timber surfaces will change color and
initially vary in color from items that have been previously purchased.
Please re-oil the wood every 12 weeks or whenever the wood appears to be dry to retain a good level of protection. We recommend using
a boiled linseed oil. Please follow the product instructions carefully when using this product on your furniture set. Regular oiling will
minimize cracking but won’t eliminate it. Cracking of the timber does not affect the durability of the product.
When cleaning the cushions, use a mild soap and water mixture (DO NOT USE BLEACH) and gently rub the surface of the fabric and rinse
with water. Allow time for cushions to dry before use. Always cover your cushions with waterproof covers when you are not using it to
prolong the life of the cushions.
When moving the furniture, DO NOT drag pieces as this may cause damage to the wood joints and cause cracking or splintering of the
wood.
10