HAMPTON BAY CAVASSO 171-410-4DS-V2 User manual

THANK YOU
quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing Hampton Bay!
USE AND CARE GUIDE
CAVASSO 4-PIECE DEEP SEATING SET WITH SWIVEL ROCKERS
(2 Piece Swivel Rockers)
1-855-HD-HAMPTON
HAMPTONBAY.COM
Item # 741 612
Model #171-410-4DS-V2
this 4-piece set. We strive to continually create
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8.00 a.m. - 7.00 p.m. EST, Monday - Friday,
9.00 a.m. - 6.00 p.m. EST, Saturday

2
Table of Contents
Safety Information
DANGER: Please keep children out of the assembly area
during assembly.
CAUTION: Use the chair
Warranty
5 YEAR FRAME / 2 YEAR FABRIC LIMITED WARRANTY
WHAT IS COVERED r two years.
WHAT IS NOT COVERED
It remains the customer’s responsibility for freight and packaging charges to and from our service center. This warranty does not cover
s warranty.
We reserve the right to make substitutions with similar merchandise, if the model in question is no longer in production.
Table of Contents........................................................2
Safety Information.......................................................2
Warranty......................................................................2
5 Year Frame Limited Warranty, 2 Year Fabric
Pre-Assembly...............................................................3
Planning Assembly.................................................................... 3
Hardware Included.................................................................. 3
Package Contents ....................................................................4
Assembly ....................................................................5
...................2Limited Warranty ..........................
................................................................2
............ ............
What Is Covered
What Is Not Covered ................................................................2..
.... ..
Care Instructions.... ................................................................2..
You may contact our customer service department with any questions by phone at 1-855-HD-HAMPTON or visit www.hamptonbay.com.
Care Instructions
Before using, wipe with a clean, dry cloth. Do not use bleach or solvents. Treat frame with liquid wax for maximum protection against UV light
and salty, damp air. When not in use, store furniture in a cool, dry place. If your set includes cushions or mesh fabric, they may be cleaned by
hand with a mild solution of soap and water. Rinse cushion thoroughly and allow to drip dry. Do not machine wash or tumble dry, as cushions
may shrink. Do not use bleach or solvents on fabrics.
IMPORTANT: All bolts and nuts must be fully tightened
before using the chairs.

3 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Pre-Assembly
PLANNING ASSEMBLY
It will take two people about 20 minutes to complete the assembly process.
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
II
FF GG HH
AA BB CC DD
EE
Part Description Quantity
AA
Nut
4
BB Bolt (M8x40) 8
CC
8
DD
Washer plate
2
Washer 8 EE
Bolt cap
FF 8
GG 16
HH Nut cap 16
Part Description Quantity
Plastic bushing
Lock washer
II Spanner 2

4
Pre-Assembly (continued)
PACKAGE CONTENTS
Part Description Quantity
A Chair seat 2
B Chair base 2
A
B
C
C T-rock 2
D
E
D Back cushion 2
E Seat cushion 2

5 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Assembly
1 Attaching the T-rock to the chair seat
2 Attaching the plastic bushing
□Place the chair base (B) on a flat, smooth surface.
Hammer the plastic bushing (CC) into the plastic sleeve of the chair base (B) until they are at the same level.
Note to allow the small end in first.
B
CC
A
BB
GG
AA
EE
FF
DD
HH
GG
1
2
C
HH
□
□
IMPORTANT: You may need to loosen pre-installed bolts
to ensure chair seat (A) and chair base (B) will line up.
IMPORTANT: You may need to loosen the pre-installed
bolts to ensure the chair seat (A) and T-rock (C) will line up.
□
□
Fully tighten all bolts (BB) and nuts (DD) and pre-installed bolts
and nuts.
□
Cover all bolts (BB) and pre-installed bolts with bolt caps (GG).
Cover all nuts (BB) and pre-installed nuts with nut caps (HH).
Align the T-rock (C) to the U-bar (1) of the chair seat (A) from
above the U-bar. (Viewing the chair seat when it is upside down.)
Clamp the rocking plates (2) of the T-rock (C) and the U-bar (1) of
the chair seat (A) together with washer plates (AA).
Secure the rocking plates (2), the U-bar (1) and the washer plates (AA)
with bolts (BB) from below the washer plates (AA), while with
washers (EE), lock washers (FF) and nuts (DD) from above
the washer plates (AA) with spanners (II).
Place the chair seat (A) upside down on a flat, smooth surface.
□

6
Assembly (continued)
3 Attaching the chair base
4 Placing the cushion
□Insert the shaft of the T-rock (C) into the centeral cylinder of the
chair seat (B) until you hear an audible click.
□Place the cushions (D) and (E) on the chair.
□Secure the seat cushion (E) on the chair frame with hook
and loop straps.
A
B
C
D
E
□Repeat step 1 through 4 for the other chair.

1-855-HD-HAMPTON
HAMPTONBAY.COM
Retain this manual for future use.
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8.00 a.m. - 7.00 p.m. EST, Monday - Friday,
9.00 a.m. - 6.00 p.m. EST, Saturday