HAMPTON BAY HAYMONT FRS80961-ST User manual

THANK YOU
We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this set. We strive to continually
create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing Hampton Bay!
USE AND CARE GUIDE
HAYMONT STEEL WICKER 7PC DINING SET
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
Item # 0000 000 000
Model # FRS80961-ST

2
Table of Contents
Table of Contents................................... . 2
Important Safety Instructions.......................... 2
What is covered ...................................3
What is not covered ................................3
Warranty ................................... . . . . . . . 3
Pre-Assembly..................................... . . 3
Planning Assembly ............................... . . 3
Hardware Included ............................... . . 4
Stationary Chair Package Contents . ......... . . . . . . . . . . . 4
Care and Cleaning .................................. . 9
Stationary Chair Assembly................... . . . . . . . . . .
Important Safety Instructions
SAVE THESE INSTRUCTIONS
WARNING: THIS SET IS MADE FOR THE EXPLICIT PURPOSE OF PROVIDING OUTDOOR FUNCTIONS AND IS NOT TO BE USED AS A TOY.
THIS PRODUCT IS INTENDED FOR NORMAL OUTDOOR USE; HOWEVER, THE MANUFACTURER RECOMMENDS STORING AND/OR COVERING THIS
PRODUCT WHEN ANY FORMIDABLE/SEVERE WEATHER IS APPROACHING.
READ ALL INSTRUCTIONS BEFORE USE
To reduce the risk of injury to persons:
1. Close supervision is necessary when this furnishing is used by
or near children, or disabled persons, if applicable.
2. Use this furnishing only for its intended use as described in
these instructions. Do not use attachments not recommended by
the manufacturer.
3. Do not move the chair while it is occupied. Failure
to obey this caution could result in injury.
WARNING: DO NOT LOCATE THIS PRODUCT NEAR OPEN FLAMES. DO NOT USE THIS PRODUCT AS A SUPPORT. DO NOT SHAKE, LEAN OR CLIMB
ON THE PRODUCT. CHILDREN UNDER THE AGE OF 10, NEAR THE PRODUCT, SHOULD BE SUPERVISED BY A COMPETENT ADULT AT ALL TIMES.
THIS PRODUCT IS NOT INTENDED FOR COMMERCIAL USE AND WILL VOID THE WARRANTY.
WARNING: This chair/ table unit is heavy, and may
require two adults for safe assembly.
WARNING: Never use this product as a support. Do not
shake, lean, or climb on the product at any time.
WARNING: Do not place heavy objects on the chair or
table.
WARNING: Weight limit for the chair is 250lbs
(113.39Kg) for each seat.
WARNING: Please keep children out of the assembly
area before assembly.
CAUTION: When not in use, secure the product in a
cool and covered location.
CAUTION: Do not locate the product near any heat
sources.
Save These Instructions .............................2
Read All Instructions Before Use.......................2
6
Table Assembly. . .......................... . . . . . . . . . . 8
Table Package Contents . ................. . . . . . . . . . . . 5
4. This table is not intended to support an umbrella.
Umbrellas must have a suitable base or stand.
Swivel Chair Package Contents . . . . ......... . . . . . . . . . . .5
Swivel Chair Assembly . . . ................... . . . . . . . . . 7

Warranty
3 YEAR FRAME AND 3YEAR FABRIC LIMITED WARRANTY
WHAT IS COVERED
We warrant the frames to be free of manufacturing defects to the original purchaser for two years, and a two year limited warranty for
the fabric.
WHAT IS NOT COVERED
It remains the customer’s responsibility for freight and packaging charges to and from our service center. This warranty does not cover
commercial use, hardware, acts of nature, fire, freezing and abusive use. In addition, purchased parts are not covered under this warranty.
We reserve the right to make substitutions with similar merchandise, if the model in question is no longer in production.
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.HAMPTONBAY.com.
Pre-Assembly
PLANNING ASSEMBLY
Read all instructions before assembly.
To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard.
NOTE: More than one person may be required to assemble this product.
3 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.

HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
STATIONARY CHAIR PACKAGE CONTENTS
Pre-Assembly (continued)
4
Chair Bucket
Chair Base
4
4
A
B
4 C
Part Description Quantity
Seat Cushion
AA BB CC DD
EE
M8x20 Combination Hex Bolt
M6x15 Combination Bolt
8+1
16+1
AA
BB
Hex Wrench
12+1
CC
Part Description Quantity
Hand Knob
DD 2
EE Wrench 1
A
B
C

TABLE PACKAGE CONTENTS
Pre-Assembly (continued)
5
Table Top
Table Leg
1
1
H
Support Bar
1
I
Part Description Quantity
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
G
J
Umbrella Ring
2
Seat Cushion
Swivel Chair Bucket
2
2
D
Support Tube
2
E
Part Description Quantity
C
F
Swivel Base
2
E
F
D
SWIVEL CHAIR PACKAGE CONTENTS
C
H
J
G
I

Stationary Chair Assembly
1Attaching The Chair Base To The Chair Bucket
2Tightening All Bolts
Place the chair bucket (A) upside down on a soft surface.
Attach the chair base (B) to the chair bucket (A) using hand knobs(CC).
NOTE: Loosely tighten all the bolts using the hex wrench (DD).
6
Once all of the bolts are in place, fully tighten all the bolts using the hex wrench (DD).
Ensure all connections are secure before use.
Turn the chair right side up.
Put the seat cushion (C) on the chair.
A
B
CC
C

Swivel Chair Assembly
1Attaching The Support Tube To The Swivel Chair Bucket
2Tightening All Bolts
Place the swivel chair bucket (D) upside down on a soft surface.
Attach the support tube (E) to the swivel chair bucket (D) using M8x20 combination hex bolts (AA).
NOTE: Loosely tighten all the bolts using the wrench (EE).
7
Once all of the bolts are in place, fully tighten all the bolts using the wrench (EE).
Ensure all connections are secure before use.
Turn the chair right side up.
Put the seat cushion (C) on the chair.
D
E
AA AA
E
F
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Insert the support tube (E) into the swivel base (F).
C

Table Assembly
1Connecting The Table Leg To The Table Top
2Connecting The Support Bar To The Table Legs
NOTE: Loosely tighten all the bolts using the hex wrench (DD).
8
Place the table top (G) upside down on a soft surface.
Connect the support bar (I) to the table legs(H) using M6x15 combination bolts (BB).
Attach the table legs (H) to the table top (G) using M6x15 combination bolts (BB).
NOTE: Loosely tighten all the bolts using the hex wrench (DD).
G
H
BB BB
H
I
BB
BB

Table Assembly (continued)
9
3Tightening The Bolts
Once all of the bolts are in place, fully tighten all the bolts using the hex wrench (DD).
Ensure all connections are secure before use.
Turn the table right side up and put the umbrella ring (J) on the table top (G).
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
J
Care Care and Cleaning
For best results, clean the frame and cushions with a damp cloth and dry thoroughly. This will help prevent mildew by removing dirt
particles that may accumulate.
Do not clean with abrasive materials, bleach or solvents.
Store the set in a dry sheltered place when not in use.
Keep the set out of fire, extreme heat, freezing conditions, and inclement weather such as rain, hail, sleet, snow, or wind.

Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
Retain this manual for future use.
For certification use only
Factory Stationary Chair ID# FRS80961
Factory Table ID# FTS61192A
Factory Swivel Chair ID# FRS80961S