HAMPTON BAY FCS80231RST User manual

THANK YOU
mpton Bay through the purchase of this deep seating set. We strive to continually create
quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing Hampton Bay!
Item # 658 977
Model # FCS80231RST
USE AND CARE GUIDE
BELLEVILLE 4-PIECEDEEP SEATING SET
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service.
8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM

2
Table of Contents
Table of Contents..........................................................2
Warranty ........................................................................2
What is Covered ...................................................................... 2
What is Not Covered ................................................................ 2
Pre-Assembly ................................................................3
Planning Assembly .................................................................. 3
Hardware Included .................................................................. 3
Chair Assembly............................................................. 7
Glider Assembly ..........................................................10
Care and Cleaning.......................................................15
Warranty
2 YEAR FRAME AND 2 YEAR LIMITED FABRIC WARRANTY
WHAT IS COVERED
We warrant the frame and fabric to be free of manufacturing defects to the original purchaser for two years.
WHAT IS NOT COVERED
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.HamptonBay.com.
Safety Information
PRODUCT CAUTION
This deep seating set was made for the explicit purpose of providing outdoor functions and is not to be used as a toy. This product is not
intended for inclement / severe weather in any form including, but not limited to: rain, hail, sleet, snow and / or wind. The manufacturer
e. Do
not use product as a support. Do not shake, lean or climb on product. Children under the age of 10, near the product, should be supervised
by a competent adult at all times. This product is NOT intended for commercial use and will void the warranty.
SAFETY WARNINGS
It remains the customer’s responsibility for freight and packaging charges to and from our service center. This warranty does not cover
s warranty. We
reserve the right to make substitutions with similar merchandise, if the model in question is no longer in production.
Table Assembly ...........................................................13
Chair Package Contents ........................................................... 4
Glider Package Contents .......................................................... 5
Table Package Contents.......................................................... 6
Safety Information .......................................................2
Product Caution .................................................................... 2
WARNING: Weightlimit for chairsis 250 lbs (113.39 Kg)
for each seat.
WARNING: This deep seating set unit is heavy, and
may require two adults for safe assembly.
CAUTION: When not in use, secure the product in a
cool and covered location.
CAUTION: Do not place heavy objects on the tabletop.
!
!
C
AUTI
O
N: When not
i
n use, secure the product
i
n a
cool and covered locat
i
on
.
CAUTION: Do not place heavy objects on the chair.
!
Safety Warnings ..................................................................... 2

3
Pre-Assembly
PLANNING ASSEMBLY
Read all instructions before assembly.
To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard.
NOTE: More than one person may be required to
assemble this product.
Part Description Quantity
AA M6x20 combination bolt 18 + 1
BB M6x30 combination bolt 8 + 1
CC M6x25 Bolt 1+4
DD M6x15 combination bolt 8 + 1
EE M6x18 countersunk bolt 4 + 1
Part Description Quantity
FF M6 plastic washer 4+1
GG Hex wrench 2
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.

4
Pre-Assembly (continued)
CHAIR PACKAGE CONTENTS
Part Description Quantity
A Sling bucket 2
B Right arm 2
2mratfeLC
2rabkcaBD
A
C
B
D

5
Pre-Assembly (continued)
GLIDER PACKAGE CONTENTS
Part Description Quantity
E Sling bucket 1
F Right arm 1
1mratfeLG
H Glider base 1
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
E
F
G
H

6
Pre-Assembly (continued)
Part Description Quantity
6eliTI
J Table rim 1
4gelelbaTK
L Leg connector 1
I
J
L
K
TABLE PACKAGE CONTENTS

1
l
7
Chair Assembly
Attach the sling bucket (A) to the left arm (C) using M6x20 combination bolts (AA) and M6x30 combination bolt (BB), as shown below.
Place the back bar (D) into the left arm (C).
Repeat this step for the right arm (B).
Attaching the chair arms to the chair back
NOTE: Loosely tighten all bolts using the hex wrench (GG)..
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.

2
l
8
Chair Assembly (continued)
Securing the back bar
Turn the chair right side up.
Attach the back bar (D) to the chair arms (B and C) using M6x25 bolts (CC).
NOTE: Loosely tighten all bolts using the hex wrench (GG)..
D
C
B
CC

3
l
9
Chair Assembly (continued)
Tightening all bolts
Tighten all the bolts.
Check and ensure the chair is tightly assembled and stable before use.
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.

l
10
Glider Assembly
1
Connecting the glider arms to the glider seat
Attach the right arm (F) to the front of the sling bucket (E) using M6x20 combination bolt (AA).
Attach the right arm (F) to the back of the sling bucket (E) using M6x30 combination bolts (BB).
Repeat this procedure to attach the left arm (G) to the sling bucket (E).
NOTE: Loosely tighten the bolts using the hex wrench (GG).

l
11
Glider Assembly (continued)
2
Connecting the arms to the connection bar
Attach the glider base (H) to the glider arms (F and G) using M6x18 countersunk bolts (EE) and M6 plastic washers (FF)
NOTE: Loosely tighten the bolts using the hex wrench (GG)..
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
The front and back of the glider base (H) are different and will not assemble in reverse.

l
12
Glider Assembly (continued)
3
Tightening all bolts
Turn the glider right side up.
Tighten all the bolts. Check and ensure the glider is tightly assembled and stable before use.

l
13
Table Assembly
1
Connecting the table legs
Place the table rim (J) upside down on a soft surface.
Attach each of the table legs (K) to the table rim (J) using M6x20 Combination bolts (AA).
NOTE: Loosely tighten the bolts using the hex wrench (GG)..
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.

l
14
Table Assembly (continued)
2
Connecting the leg connector to the table legs
Align the holes on the leg connector (L) with the holes on the inside of each table leg (K).
Attach the leg connector (L) to the table legs (K) using M6x15 combination bolt (DD).
Tighten all the bolts.

l
15
Table Assembly (continued)
3
Adding the tiles
Turn the table right side up.
Ensure all connections are secure.
Carefully place the tiles (I) onto the tablerim (J).
Check and ensure the table is tightly assembled and stable before use.
I
ò
J
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Care and Cleaning
For best results, clean the frames with a damp cloth and dry thoroughly. This will help prevent mildew by removing dirt particles that
may accumulate.
Do not clean with abrasive materials, bleach, or solvents.
Store the set in a dry, sheltered place when not in use.
ng conditions, and inclement weather such as rain, hail, sleet, snow, or wind.

call Hampton Bay Customer Service.
8 a.m. - 7 p.m., EST, Monday - Friday, 9a.m. - 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
Retain this manual for future use.
Questions, problems, missing parts? Before returning to the store,