HAMPTON BAY SKU 549-831 User manual

Page 1
INSTRUCTION MANUAL
2LT Interior Vanity
The Home Depot SKU 549 831 (UPC 6940500314273) (Brushed Nickel)
The Home Depot SKU 549 973 (UPC 6940500314280) (Chrome)

Page 2
Thank you for purchasing this Hampton Bay interior vanity. This product has
been manufactured with the highest standards of safety and quality.
FEATURES:
1. Two light interior vanity in Brushed Nickel finish (SKU 549 831) or
Chrome finish (SKU 549 973) with Frosted glass.
2. This fixture has been engineered to safely use two 60 watt medium base
incandescent light bulbs (do not exceed 60 watts each) (not included).
3. For energy savings, this fixture has been engineered to safely use two
standard base compact fluorescent light bulbs (for equivalent light output,
do not exceed 15 watts each) (not included).
4. This fixture can be installed as an up light or a down light.
QUESTIONS, PROBLEMS, MISSING PARTS:
Before returning to your local The Home Depot, please call our Customer
Service Team at 1 877 527 0313 or visit www.homedepot.com. Please
reference your SKU (549 831 Brushed Nickel fixture, 549 973 Chrome
fixture) or UPC (6940500314273 Brushed Nickel fixture, 6940500314280
Chrome fixture).

Page 3
CAUTION:
1. Before starting installation of this fixture or removal of a previous fixture,
disconnect the power by turning off the circuit breaker or by removing the
fuse at the fuse box.
2. CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY
ELECTRICAL QUESTIONS.
3. If you have any non electrical questions about this fixture, please contact
our Customer Service Team at 1 877 527 0313 or visit
www.homedepot.com. Please reference your SKU (549 831 Brushed
Nickel fixture, 549 973 Chrome fixture) or UPC (6940500314273 Brushed
Nickel fixture, 6940500314280 Chrome fixture).
4. Keep your receipt and these Instructions for Proof of Purchase.
TOOLS REQUIRED FOR ASSEMBLY & INSTALLATION
(not included):
2 Light Bulbs Safety Goggles Ladder Gloves Wire Strippers
(60 watt maximum)
(or CFL equivalent)
Flathead Screwdriver Phillips Screwdriver Electrical Tape Wire Cutters

Page 4
PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):
2ea Shades (#4) 2ea Socket Rings (#5)
ASSEMBLY INSTRUCTIONS:
1. Carefully unpack the fixture. Lay out all parts on a clean surface.
2. Unscrew the two Socket Rings (#5) from the two Sockets (#3). Place the
two Shades (#4) over the two Sockets (#3). Screw the two Socket Rings (#5)
onto the two Sockets (#3) to secure the two Shades (#4).
3. Install two 60 watt medium base incandescent light Bulbs (#6) (not
included) or two equivalent standard base compact fluorescent light bulbs
(not included) in the two Sockets (#3).

Page 5
ASSEMBLY:

Page 6
PARTS INCLUDED FOR INSTALLATION (parts are not to scale):
2ea Lock Nuts (#2) 3ea Wire Connectors (#8) 1ea Cross Bar (#9)
2ea Outlet Box Screws (#10) 2ea Mounting Screws (#11) 1ea Ground Screw (#12)
INSTALLATION INSTRUCTIONS:
1. Screw the two Mounting Screws (#11) onto the Cross Bar (#9). Mount the
Cross Bar (#9) to the Outlet Box (#7) using the two Outlet Box Screws (#10).
[Make sure the threads of the Mounting Screws (#11) are facing outside when
the Cross Bar (#9) is attached to the Outlet Box (#7).]
2. Wrap the ground wire from the fixture around the Ground Screw (#12) on the
Cross Bar (#9), and then connect the ground wire from the fixture to the
ground wire from the Outlet Box (#7). Connect the two white wires from the
fixture to the white wire (neutral wire) from the Outlet Box (#7). Connect the
two black wires from the fixture to the black wire (live wire) from the Outlet
Box (#7). Cover the three connections using the three Wire Connectors (#8).
Wrap the three wire connections with electrical tape for a more secure
connection. Position the wires back inside the Outlet Box (#7). Note: If you
have electrical questions, consult your local electrical code for approved
grounding methods.
3. Place the fixture body on the wall by aligning the protruding Mounting Screws
(#11) all the way through the two holes on the Wall Plate (#1). Tighten the
fixture to the wall by screwing the two Lock Nuts (#2) onto the two protruding
Mounting Screws (#11).
4. Installation is complete. Turn on the power at the circuit breaker or fuse box.
Turn the light switch on to activate the fixture.

Page 7
INSTALLATION:

Page 8
TROUBLESHOOTING:
PRODUCT MAINTENANCE:
1. To clean the fixture, first disconnect power to the fixture by turning off the circuit breaker
or by removing the fuse at the fuse box. Next, use a dry or slightly dampened clean cloth
(use clean water, never a solvent) to wipe the glass and surface of the fixture.
2. Do not use any cleaners with chemicals, solvents or harsh abrasives. Use only a dry soft
cloth to dust or wipe carefully.
LIMITED WARRANTY
The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a period
of five (5) years from date of purchase. This warranty applies only to the original consumer purchaser and only
to products used in normal use and service. If this product is found to be defective, the manufacturer’s only
obligation, and your exclusive remedy, is the repair or replacement of the product at the manufacturer’s
discretion, provided that the product has not been damaged through misuse, abuse, accident, modifications,
alterations, neglect or mishandling. This warranty shall not apply to any product that is found to have been
improperly installed, set up, or used in any way not in accordance with the instructions supplied with the product.
This warranty shall not apply to a failure of the product as a result of an accident, misuse, abuse, negligence,
alteration, or faulty installation, or any other failure not relating to faulty material or workmanship. This
warranty shall not apply to the finish on any portion of the product, such as surface and/or weathering, as this is
considered normal wear and tear. The manufacturer does not warrant and specially disclaims any warranty,
whether express or implied, of fitness for a particular purpose, other than the warranty contained herein.
The manufacturer specifically disclaims any liability and shall not be liable for any consequential or
incidental loss or damage, including but not limited to any labor / expense costs involved in the
replacement or repair of said product.
Problem Possible Cause Corrective Action
Light bulb will not
illuminate.
1. Light bulb is burned out. 1. Replace light bulb.
2. Power is off. 2. Make sure power supply is on.
3. Faulty wire connection. 3. Check wiring.
4. Faulty switch. 4. Test or replace switch.
Fuse blows or circuit
breaker trips when light
bulb is illuminated.
Crossed wires or power
wire is grounding out.
Check wire connections.

Page 9
MANUAL DE INSTRUCCIONES
Lámpara de Mesa de Tocador
para Interiores de 2 Luces
The Home Depot SKU 549 831 (UPC 6940500314273) (Niquel Cepillado)
The Home Depot SKU 549 973 (UPC 6940500314280) (Cromo)

Page 10
Gracias por comprar este lámpara de mesa de tocador para interiores Hampton
Bay. Este producto ha sido manufacturado con los estándares de seguridad y
calidad más altos.
CARACTERÍSTICAS:
1. La instalaciónde iluminación de mesa de tocador de dos luces en acabado
en Níquel Cepillado (SKU 549 831) o en acabado en Cromo (SKU 549
973) con cristal Escarchado.
2. Esta instalación ha sido diseñada para usar con seguridad dos bombillas de
luz incandescente de base medio de hasta de 60 vatios (no exceder de 60
vatios cada una) (no incluido).
3. Por ahorro de energía, esta instalación ha sido diseñada para usar con
seguridad dos bombillas de luz fluorescentes compactas estándares de base
medio (para la salida de luz equivalente, no exceder de 15 vatios cada una)
(no incluido).
4. Esta instalación puede ser instalada con la luz enfocada hacia arriba o hacia
abajo.
PREGUNTAS, PROBLEMAS, PARTES QUE FALTAN:
Antes de devolver a su The Home Depot local, por favor llame a nuestro
Equipo de Atención al Cliente al 1 877 527 0313 o visite
www.homedepot.com. Por favor haga referencia de su SKU (549 831
instalación de Niquel Cepillado, 549 973 instalación en Cromo) o UPC
(6940500314273 instalación de Niquel Cepillado, 6940500314280 instalación
en Cromo).