HAMPTON BAY STATESVILLE FCS70357-ST-1 User manual

THANK YOU
y through the purchase of this dining set. We strive to continually create
quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing Hampton Bay!
Item # 1001 186 714
Model # FCS70357-ST-1
USE AND CARE GUIDE
STATESVILLE 7-PIECE PADDED SLING DINING SET
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service.
8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HOMEDEPOT.CA

2
Table of Contents
Planning Assembly .................................................................. 3
Hardware Included .................................................................. 3
Care and Cleaning................................................... .19...
Pre-Assembly
Stationary Chair Assembly .......................................... 7
Stationary Chair Package Contents ......................................... 4
Table Package Contents ..........................................................6
Table Assembly ................................ ......................... .17.
Table of Contents ........................................................2
Swivel Chair Package Contents ............................................... 5
Chair Assembly .............................................. .11.
Important Safety Instructions ................................... 2
Save These Instructions ........................................................2
Read All Instructions Before Use .............................................. 2
Warranty .........................................................................3
What is Covered .......................................................................3
What is Not Covered .................................................................3
Important Safety Instructions
SAVE THESE INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
WARNING: Weight limit for the chairs is 250 lbs
(113.39 kg) for each seat.
WARNING: This dining set is heavy, and may require
two adults for safe assembly.
WARNING: Do not place more than 125 lbs of objects
on the table top.
WARNING: Do not place heavy objects on the chairs.
WARNING: Always use an umbrella table ring.
WARNING: This dining set was made for the explicit purpose of providing outdoor functions and is not to be used as a toy.
This product is intended for normal outdoor use; however, the manufacturer recommends storing and / or covering this set
when any formidable / severe weather is approaching.
W
product. Children under the age of 10, near the product, should be supervised by a competent adult at all times. This product is
NOT intended for commercial use and will void the warranty.
To reduce the risk of injury to persons:
1. Close supervision is necessary when this product is used by or
near children, or disabled persons, if applicable.
3. Do not move the chairs while the chairs are occupied. Failure
to obey this caution could result in injury.
4. Do not rock in the chair as you may fall and cause serious injury.
CAUTION: When not in use, secure the product in a
cool and covered location.
!
5. This table is not intended to support an umbrella. Umbrellas
must have a suitable base or stand. (Umbrellas are not included in
this 7-piece dining set).
2. Use this furnishing only for its intended use as described in these
instructions. Do not use attachments not recommended by the
manufacturer.
............................................................... . 3...
Swivel

3
Pre-Assembly
PLANNING ASSEMBLY
Read all instructions before assembly.
To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard.
NOTE: More than one person may be required to
assemble this product.
HARDWARE INCLUDED
Part Description Quantity
AA M6x30 combination bolt 16+
BB M6x25 combination bolt 1+21
CC M6x15 combination bolt 60+2
DD M8x20 combination hex bolt 8+1
GG
FF
DD
CC
BB
AA
EE M8x30 c 8+1
FF Hex wrench 2
NOTE: Hardware not shown to actual size.
Warranty
2 YEAR FRAME AND 2 YEAR FABRIC LIMITED WARRANTY
WHAT IS COVERED
We warrant the frames to be free of manufacturing defects to the original purchaser for two years, and a two year limited warranty for the fabric.
WHAT IS NOT COVERED
It remains the customer’s responsibility for freight and packaging charges to and from our service center. This warranty does not cover
s warranty. We
reserve the right to make substitutions with similar merchandise, if the model in question is no longer in production.
EE
GG Wrench 1
ombination hex bolt
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.homedepot.ca.
HOMEDEPOT.CA
Please contact 1-855-HD-HAMPTON for further assistance.
1

4
Pre-Assembly (continued)
STATIONARY CHAIR PACKAGE CONTENTS
Part
Description
Quantity
A Chair ucketb 4
B Left arm 4
C Right arm 4
D
Connection bar 8
A
B
C
D
D

5
Pre-Assembly (continued)
SWIVEL CHAIR PACKAGE CO STNETN
Part
Description
Quantity
4
2
2
2
2
2
E
F
G
H
I
D
D
E
F
G
H
I
Connection bar
Swivel chair bucket
Left swivel chair arm
Right swivel chair arm
Support bar
Swivel base
HOMEDEPOT.CA
Please contact 1-855-HD-HAMPTON for further assistance.

Pre-Assembly (continued)
TABLE PACKAGE CONTE STN
Part
Description
Quantity
Table top 1
Table leg 4
Sup tubetrop 2
6
K
M
Leg rotcennoc 1
K
L
M
J
L
J

1
l
7
Stationary Chair Assembly
Place the chair bucket (A) on a soft surface.
Attach the right arm (C) to the chair bucket (A) using M6x30 combination bolt (AA) and M8x30 combination hex bolt (EE).
Connecting the right arm to the chair bucket
NOTE: Loosely tighten all the bolts using the hex wrench (FF) and wrench (GG).
A
C
AA
EE
HOMEDEPOT.CA
Please contact 1-855-HD-HAMPTON for further assistance.

2
l
8
Stationary Chair Assembly (continued)
Connecting the left arm to the chair bucket
Attach the left arm (B) to the chair bucket (A) using M6x30 combination bolt (AA) and M8x30 combination hex bolt (EE).
NOTE: Loosely tighten all the bolts using the hex wrench (FF) and wrench (GG).
A
BAA
EE

3
l
Stationary Chair Assembly (continued)
Attaching the connection bars to the arms
Attach the connection bars (D) to the left and the right arms (B & C) using M6x15 combination bolts (CC).
9
D
C
B
CC
CC
D
B
C
CC
CC
NOTE: Loosely tighten all the bolts using the hex wrench (FF).
HOMEDEPOT.CA
Please contact 1-855-HD-HAMPTON for further assistance.

4
l
10
StationaryChair Assembly (continued)
Tightening the bolts
Once all of the bolts are in place, fully tighten the bolts.
Turn the chair right side up.
Ensure the chair is tightly assembled and stable before use.