HAMPTON BAY Tank Holder Planning guide

Instructions
& User’s Manual
Model No：Tank Holder
FOR OUTDOOR USE ONLY.
KEEP THE INSTRUCTIONS FOR FUTURE REFERENCE.
For product warranty,please go to www.hamptonbay.com or call 1-855-HD-HAMPTON

2
WARNING
Before you assemble or operate this unit, please carefully read this entire manual.
• MAXIMUM WEIGHT CAPACITY: This item can withstand an additional weight of 30 lbs.
• This item is intended for outdoor use onl y.
•
• Storage of this item indoors is permissible only if the tank is disonnected and p roperly stored
outdoors.
• Young child ren should be carefully supervised when in the vicinity of this item.
• Do not sit on this item.
• Always place this item on a hard, level non-combustable surface such as conc rete, rock or stone.
• This item must be used ONLY outdoors in a well ventilated space and shall not be used inside a
building, garage or any enclosed area.
• This item is designed for use with a 20 lb. liquid p ropane gas (LP) tank (not included).
• This item is not to be installed or used in or on any recreational vehicle or boat.
• Do not attempt to transport this item with a gas tank installed.
Before beginning assembly of product, make su re all parts are present. Compare parts with package
contents list and ha rdware contents list. If any parts a re missing or damaged, do not attempt to
assemble the product.
Estimated Assembly Time: 10 minutes
Tools Required for Assembly (not included): Phillips Screwdriver
NOTE: You must follow all steps to p roperly assemble this Tank Hideaway™. Do not attempt to
assemble without the p roper tools.
SAFETY INFORMATION
HARDWARE
Item Description Qty
AA M6X12 Screw 10
BB 4
AA BB
M6X25 Screw

3
Item Description Qty
A Left Side Panel 1
B Lid 1
C Front Panel 1
D Back Panel 1
E Right Side Panel 1
F Metal Stand 1
G Handle 1
CONTENTS
B
G
E
D
A
F
C

4
3.
ASSEMBLY INSTRUCTIONS
1.
2.
B
Attach the left panel(A), front panel(C), right
panel(E) and back panel(D) with 8pcs M6X12
screws(AA), then tighten them.
Turn over the body and assemble metal
stand(F) to the base of the 4 assembled panels
using 4pcs M6X25 screws(BB).
Screw off screws from handle(G), then assem-
ble into the lid(B).
C
E
A
D
F
G

5
5.
4.
Place a 20 lb. propane gas tank (not included)
on top of the stand (F). Turn the preassembled
wing screw on the stand (F) to secure the propane
gas tank.
6. Feed the regulator hose from your gas
appliance (not included) through the opening at
the bottom of the Tank Hideaway™. Connect the
regulator from your gas appliance to the propane
gas tank.
Open the lid (B) to connect or disconnect your
regulator and to open or close the gas propane
tank valve. Make sure that the hose is not pressed
or pinched underneath the item.
CAUTION
Assemble lid(B) into the back panel useing
2pcs M6X12 screws(AA).
B
F

6
MAINTENANCE
• Store the item in a cool dry place away from direct sunlight.
• The propane gas tank must be disconnected and removed from the item before this item may be
stored indoors.
• Use manufacturer approved or supplied replacement parts and accessories only. Otherwise may
void the warranty of this product and result in a hazardous condition.
• Keep the item free and clear from combustible materials.