HAMPTON BAY FZS80386-ST User manual

THANK YOU
y through the purchase of this set. We strive to continually create
quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing Hampton Bay!
Model # FZS80386-ST
Item # 1001 129 747
USE AND CARE GUIDE
COOPERSMITH 7-PIECE DINING SET
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service.
8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HOMEDEPOT.CA
FZS80386-STN
1001 188 043

2
Table of Contents
Pre-Assembly ................................................................3
Planning Assembly .................................................................. 3
Hardware Included .................................................................. 3
Swivel Chair Assembly...................................................6
!
Table Package Contents ..........................................................5
Care and Cleaning.......................................................11
Table Assembly...............................................................9
Table of Contents ........................................................2
Swivel Chair Package Contents.................................................
CAUTION: Do not locate the product near
any heat source.
WARNING: Weight limit for the chairs is 250 lbs
(113.39 kg) for each seat.
WARNING: This dining set is heavy, and may require
two adults for safe assembly.
WARNING: Do notplace heavy objects on the chair.
WARNING: Do not place heavy objects on the table top.
CAUTION: When not in use, secure the product in a
cool and covered location.
!
4
Important Safety Instructions ................................... 2
Save These Instructions ........................................................2
Read All Instructions Before Use .............................................. 2
Warranty .........................................................................3
What is Covered .......................................................................3
What is Not Covered .................................................................3
Important Safety Instructions
SAVE THESE INSTRUCTIONS
WARNING: This set was made for the explicit purpose of providing outdoor functions and is not to be used as a toy.
This product is intended for normal outdoor use; however, the manufacturer recommends storing and / or covering this set
when any formidable / severe weather is approaching.
W
product. Children under the age of 10, near the product, should be supervised by a competent adult at all times. This product is
NOT intended for commercial use and will void the warranty.
READ ALL INSTRUCTIONS BEFORE USE
To reduce the risk of injury to persons:
1. Close supervision is necessary when this product is used by or
near children, or disabled persons, if applicable.
2. Use this product only for its intended use as described in
these instructions. Do not use attachments not recommended by
the manufacturer.
3. Do not move the chairs while the chairs are occupied. Failure
to obey this caution could result in injury.
4. Do not rock in the chair as you may fall and cause serious injury.
5. Please keep children out of the assembly area before assembly.
6. This table is not intended to support an umbrella. Umbrellas must
have a suitable base or stand.

3
Pre-Assembly
PLANNING ASSEMBLY
Read all instructions before assembly.
To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard.
NOTE: More than one person may be required to
assemble this product.
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
HOMEDEPOT.CA
Please contact 1-855-HD-HAMPTON for further assistance.
BB
AA CC
DD EE
AA 8+1
8+1
8+1
BB
CC
BB
Wrench 2
M6x15 combination bolt
M6x25 combination bolt
M8x20 combination hex bolt
1
DD
1
EE
Hex wrench
Wrench
Part Description Quantity
Warranty
2 YEAR FRAME AND 2 YEAR FABRIC LIMITED WARRANTY
WHAT IS COVERED
We warrant the frames to be free of manufacturing defects to the original purchaser for two years, and a two year limited warranty for the fabric.
WHAT IS NOT COVERED
Contact the Customer Service Team at 1-855-HD.-HAMPTON or visit www.homedepot.ca.
It remains the customer’s responsibility for freight and packaging charges to and from our service center. This warranty does not cover
commercial use, hardware, acts of nature, fire, freezing and abusive use. In addition, purchased parts are not covered under this warranty.
We reserve the right to make substitutions with similar merchandise, if the model in question is no longer in production.

4
Pre-Assembly (continued)
CHAIR PACKAGE CONTENTS
SWIVEL
A 2
2
2
2
2
B
C
D
E
BB
Wrench 2
Chair frame
Support tube
Chair base
Seat cushion
Lumbar pillow
Part Description Quantity
A
B
D
E
C

5 HOMEDEPOT.CA
Please contact 1-855-HD-HAMPTON for further assistance.
Pre-Assembly (continued)
TABLE PACKAGE CONTENTS
F1
4
G
BB
Wrench
Table top
Table leg
1
H Leg connector
Part Description Quantity
F
G
H

6
1
Swivel Chair Assembly
Place the chair frame (A) upside down on a soft surface.
Attach the support tube (B) to the chair frame (A) using M8x20 combination hex bolts (CC).
ATTACHING THE SUPPORT BAR TO THE CHAIR FRAME
Once all of the bolts are in place, fully tighten the bolts using the wrench (EE).
A
B
CC
CC

7
HOMEDEPOT.CA
Please contact 1-855-HD-HAMPTON for further assistance.
2CONNECTING THE SUPPORT TUBE TO THE CHAIR BASE
Swivel Chair Assembly (continued)
Turn the chair right side up.
Insert the support tube (B) into the chair base (C).
C
B
A

8
3
Swivel Chair Assembly (continued)
Ensure all connections are secure before use.
CHECKING THE CHAIR
E
D
lumbar pillow (E)

9
HOMEDEPOT.CA
Please contact 1-855-HD-HAMPTON for further assistance.
1
l
Table Assembly
Place the table top (F) upside down on a soft surface.
Attach the table leg (G) to the table top (F) using M6x15 combination bolts (AA).
CONNECTING THE TABLE LEGS TO THE TABLE TOP
Do not fully tighten the bolts at this step.
NOTE: Loosely tighten all the bolts using the
hex wrench (DD).
F
AA AA
G

10
2
l
Table Assembly (continued)
Attach the leg connector (H) to the table legs (G) using M6x25 combination bolts (BB).
ATTACHING THE LEG CONNECTOR TO THE TABLE LEGS
Do not fully tighten the bolts at this step.
NOTE: Loosely tighten all the bolts using the
G
H
BB
BB
hex wrench (DD).