HAMPTON BAY THD130419.1a.OF User manual

THANK YOU
We appreciate the trust and condence you have placed in Hampton Bay through the purchase of this decorative bookcase. We strive to
continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home
improvement needs. Thank you for choosing Hampton Bay!
USE AND CARE GUIDE
5-SHELF DECORATIVE BOOKCASE
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 6 p.m., EST, Monday - Friday
1-855-HD-HAMPTON
HAMPTONBAY.COM
Item #1000 020 147
Model #THD130419.1a.OF

2
Table of Contents
Table of Contents ...................................2
Safety Information ..................................2
Warranty ..........................................2
Pre-Assembly ......................................3
Planning Assembly.................................3
Tools Required ....................................3
Hardware Included.................................3
Package Contents .................................4
Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Weight Limits ....................................11
Safety Information
Read and understand all instructions before assembly. WARNING: Anchor the bookcase to the wall after
assembly to prevent accidental tipping and injury.
Warranty
LIMITED ONE YEAR PRODUCT WARRANTY
WHAT IS COVERED
This limited warranty covers the original purchase of this product used for normal commercial,
Personal, or household use. The supplier warrants its products will be free from defects in materials and workmanship (normal wear and
tear excepted) for a period of one (1) year from the date of purchase, except as provided below. The supplier, at its option, will replace with
a comparable product, free of charge, any product purchased from it that fails under normal use as a result of such defect.
Materials are warranted for one year from date of purchase. Proof of purchase is required in the form of a receipt (copy or original) to
validate the warranty.
The supplier provides this limited warranty in lieu of all other warranties either expressed or implied. Expressly excluded are all warranties
of tness for a particular purpose or merchantability. The supplier’s sole obligation and the user’s exclusive remedy under this warranty
shall be limited to the repair, refund or replacement at the supplier’s sole discretion and cost, of product or components.
THIS WARRANTY APPLIES ONLY TO THE U.S. AND CANADA.
WHAT IS NOT COVERED
This warranty does not apply to damage caused by re, accident, negligence, misuse, or use other than as stated in product instructions,
improper cleaning or other circumstances not directly attributable to defects in materials and workmanship.
Natural variations occurring in wood or other materials will not be considered defects, and the supplier does not warrant the color-fastness
or matching of colors, grains, or textures of such materials. This warranty does not apply to: modications of the product, attachments to
the product not approved, and products that were not installed, used, or maintained in accordance with product instructions and warnings.
Contact the Customer Service Team at 855-HD-HAMPTON or visit www.Hamptonbay.com.

3 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Pre-Assembly
PLANNING ASSEMBLY
Compare all parts with the Hardware Included and Package Contents lists in this manual. If any part appears missing or damaged, do not
assemble this product. Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.HamptonBay.com.
TOOLS REQUIRED
Flathead
screwdriver
Phillips
screwdriver
HARDWARE INCLUDED
NOTE: Hardware shown to actual size.
AA FF
GG HH II JJ KK
BB CC DD EE
Part Description Quantity
AA Cam lock 30 + 1 extra
BB Cam bolt 30 + 1 extra
CC Wood dowel 30 + 1 extra
DD 3x14 mm screw 28 + 1 extra
EE 4x16 mm screw 7
FF Shelf support 12 + 2 extra
GG Cover 22
HH 4x55 mm screw 3 + 1 extra
II 4x38 mm screw 1
JJ Wall bracket 1
KK Wall anchor 1

4
Pre-Assembly (continued)
PACKAGE CONTENTS
A B C
D E F
G H I
J K L
M N
Part Description Quantity
A Hutch top 1
BTop 1
C Bottom 1
D Upper left side panel 1
E Upper right side panel 1
F Left side panel 1
G Right side panel 1
H Bottom front rail 1
I Adjustable shelf 3
J Top trim 1
K Long rail 2
L Short rail 2
M Upper back panel 1
N Lower back panel 1

5 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Assembly
1 Preparing the hutch top and top
□Screw four cam bolts (BB) into the appropriate holes on the
hutch top (A).
□Insert six wood dowels (CC) into the appropriate holes
along the sides of the upper left and right side panels (D
and E).
A
BB
CC
D
E
2 Preparing the top and the long and
short rails
□Screw four cam bolts (BB) into each side of the top (B).
□Screw three cam bolts (BB) into the two long rails (K).
Repeat for the two short rails (L).
BB
B
B
K
L

6
Assembly (continued)
3 Preparing the bottom, side panels,
and bottom front rail
□Insert sixteen wood dowels (CC) into the appropriate holes
along the sides of the bottom panel (C), left side panel (F),
and right side panel (G).
□Screw two cam bolts (BB) into the appropriate holes on the
right side of the left side panel (F).
□Screw two cam bolts (BB) into the appropriate holes on the
left side of the right side panel (G).
□Screw four cam bolts (BB) into the appropriate holes on the
bottom front rail (H).
BB
CC
C
F
G
H
4 Attaching the long rails and top trim
□Insert the cam bolts (BB) attached to the long rails (K) into
the holes along the side of the upper left and right side
panels (D and E).
□Insert three cam locks (AA) into the appropriate holes on
the upper left and right side panels (D and E). Secure the
long rails (K) to the panels (D and E) by turning the cam
locks (AA) clockwise until they lock into place over the cam
bolts (BB).
□Cover the six cam locks (AA) with covers (GG).
□Attach the top trim (J) to the hutch top (A) by inserting two
wood dowels (CC) into the hutch top (A), positioning the
top trim (J) over the two dowels (CC) and securing together
using three 4x55 mm screws (HH).
D
GG
AA
BB
K
E
HH
CC
J
A
K

7 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Assembly (continued)
5 Attaching the short rails
□Insert the cam bolts (BB) attached to the short rails (L) into
the holes along the side of the left and right side panels (F
and G).
□Insert two cam locks (AA) into the appropriate holes
on the left and right side panels (F and G). Secure the
short rails (L) to the panels (F and G) by turning the cam
locks (AA) clockwise until they lock into place over the cam
bolts (BB).
□Cover the four cam locks (AA) with covers (GG).
F
G
GG
AA
L
L
6 Attaching the side panels and bottom
front rail
□Position the bottom of the left and right side panels (F and
G) against the sides of the bottom (C). Ensure that the wood
dowels (CC) and cam bolts (BB) are fully inserted into the
appropriate holes.
□Insert four cam locks (AA) into the four corner holes of
the bottom (C) and secure the left and right side panels (F
and G) to the bottom (C) by turning the cam locks (AA)
clockwise until they lock into place over the cam bolts (BB).
□Place the bottom front rail (H) over the front of the bottom
assembly. Secure together by inserting four cam locks (AA)
into the front bottom corners of the bottom assembly and
turning the cam locks (AA) clockwise until they lock into
place over the cam bolts (BB).
AA
AA
AA
AA
G
H
G
C
C
F
F
7 Attaching the top
□Place the top (B) on top of the bottom assembly, ensuring
all cam bolts (BB) and wood dowels (CC) t together.
□Secure the top (B) to the bottom assembly by inserting four
cam locks (AA) into the holes along the top of the left and
right side panels (F and G) and turning the cam locks (AA)
clockwise until they lock into place over the cam bolts (BB).
□Cover the four cam locks (AA) with covers (GG).
AA
GG G
B
C
F

8
Assembly (continued)
8 Attaching the lower back panel
NOTE: Before attaching the back panel, ensure that
the unit is at 90°.
□Attach the lower back panel (N) to the back of the bottom
assembly using twelve 3x14 mm screws (DD).
G
B
N
DD
9 Attaching the upper left and right side
panels
□Place the upper left and right side panels (D and E) on top
of the bottom assembly. Ensure that all cam bolts (BB) and
wood dowels (CC) are fully inserted in all holes.
□Secure the left and right side panels (D and E) to the
bottom assembly by inserting four cam locks (AA) into
the bottom panel holes (D and E) and turning the cam
locks (AA) clockwise until they lock into place over the cam
bolts (BB).
□Cover the four cam locks (AA) with covers (GG).
E
AA
GG
D
F

9 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Assembly (continued)
10 Attaching the hutch top
□Place the hutch top (A) on top of the assembly, ensuring all
cam bolts (BB) and wood dowels (CC) t together.
□Secure the hutch top (A) to the assembly by inserting four
cam locks (AA) into the holes along the top of the upper
left and right side panels (D and E) and turning the cam
locks (AA) clockwise until they lock into place over the cam
bolts (BB).
□Cover the four cam locks (AA) with covers (GG).
A
E
A
A
GG
D
11 Attaching the upper back panel
NOTE: Before attaching the back panel, ensure that
the unit is at 90°.
□Attach the upper back panel (M) to the back of the
assembly using sixteen 3x14 mm screws (DD).
A
DD
M
N
F
E
12 Connecting the back panels
□Connect the back panels (M and N) to the back of the
bookcase using six 4x16 screws (EE) along seam of the
panels (M and N). M
EE
N

10
Assembly (continued)
13 Installing the shelves
□Insert shelf supports (FF) into the desired holes along the
inside of the bookcase assembly and place the shelves (I)
on top of the supports (FF).
A
I
D
FF
14 Securing the bookcase to the wall
□Attach the wall bracket (JJ) to the top center of the
bookcase using a 4x16 mm screw (EE).
□Position the bookcase along the portion of wall where you
wish the bookcase to remain and mark the installation hole
for the wall anchor (KK) using a pencil.
□Drill a hole for the wall anchor (KK), insert the wall
anchor (KK) into the wall, and secure the bookcase to the
wall using the 4x38 mm screw (II).
I
A
EE
KK
JJ
II