HAMPTON BAY THD90067.1a.ST User manual

THANK YOU
We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this bookcase. We strive to continually create
quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing Hampton Bay!
USE AND CARE GUIDE
32 in White 2-Door Wall Cabinet
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 6 p.m., EST, Monday - Friday
1-855-HD-HAMPTON
HAMPTONBAY.COM
OMSID # 205523739
Model # THD90067.1a.ST

2
Table of Contents
Table of Contents ...................................2
Safety Information ..................................2
Warranty ..........................................2
Pre-Assembly ......................................
......................................
......................................
......................................
......................................
......................................
......................................
3
Planning Assembly
Tools Required
Hardware Included
Package Contents
Assembly
Weight Limits
3
3
3
4
5
11
Safety Information
Read and understand all instructions before assembly.
Warranty
LIMITED ONE YEAR PRODUCT WARRANTY
WHAT IS COVERED
This limited warranty covers the original purchase of this product used for normal commercial,
Personal, or household use. The supplier warrants its products will be free from defects in materials and workmanship (normal wear and
tear excepted) for a period of one (1) year from the date of purchase, except as provided below. The supplier, at its option, will replace with
a comparable product, free of charge, any product purchased from it that fails under normal use as a result of such defect.
Materials are warranted for one year from date of purchase. Proof of purchase is required in the form of a receipt (copy or original) to
validate the warranty.
The supplier provides this limited warranty in lieu of all other warranties either expressed or implied. Expressly excluded are all warranties
shall be limited to the repair, refund or replacement at the supplier’s sole discretion and cost, of product or components.
THIS WARRANTY APPLIES ONLY TO THE U.S. AND CANADA.
WHAT IS NOT COVERED
improper cleaning or other circumstances not directly attributable to defects in materials and workmanship.
Natural variations occurring in wood or other materials will not be considered defects, and the supplier does not warrant the color-fastness
the product not approved, and products that were not installed, used, or maintained in accordance with product instructions and warnings.
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.Hamptonbay.com.

3 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Pre-Assembly
PLANNING ASSEMBLY
Compare all parts with the Hardware Included and Package Contents lists in this manual. If any part appears missing or damaged, do not
assemble this product. Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.HamptonBay.com.
TOOLS REQUIRED
Flathead
screwdriver
Phillips
screwdriver
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
Part Description Quantity
a
a
a16
12
4
20
4
2
24
4
2
12
4
Wood Dowel
7*50 mm Screw
Bolt
Knob
3.5*14 mm Screw
Hinge
Matel Dowel
Shelf Support
Cover Caps
4*76 mm Screw
3*14 mm Screw
b
c
d
e
f
g
h
i
j
k
f g h i j
b c d e
k

4
Pre-Assembly (continued)
PACKAGE CONTENTS
Part Description Quantity
A Top/Bottom 2
B1
C
Left Side Panel
1
D
Right Side Panel
2
E1
F
Adjustable Shelf
Back Panel 1
G
Cross Bars
1
H
Left Door
1Right Door
A
A
B
C
F
E
G
H
D
D

5 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Assembly
1Preparing the two top and two cross bars
□Insert eight wood dowels (a) into the two tops (A).
□Insert eight wood dowels (a) into the two cross bars (D).
2Assembly framework
□Connect left side panel (B) and two tops (A) and two cross bars (D) , ensure that the wood dowels (a) are fully inserted into the appropriate holes.
□Using screwdriver to tighten six screws (b) , make sure the finished sides of the panel
face toward the mantle.
□The same to assembly step the right side panel (C).
□Cover the twelve screws (b) with cover caps (j).
b
j
b
A
A
A
C
B
A
D
D
D
D
a
upper side no this hole
finished edge
finished edge

6
Assembly (continued)
3Assembling the back panel
□Fasten the back panels (F) to the assembled unit using twenty screws (d) ,
Do not over tighten the screws.
4Assembling the adjustable shelves and hinge
□Insert four shelf supports (c) into the desired holes of the cabinet inside assembly and
places the shelves (E) on top of the supports.
□Through four screws (g) with one hinge (h) to lock on the side panel ,
the same assembling step for the other hinges (h).
gh
c
c
F
CA
A
A
B
E
E
d
Before attaching the back panel be sure
that the unit is at 90°

7HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Assembly (continued)
5Assembling the door
□Through two screws (g) with one hinge (h) to lock on the door , the same assembling step for the other hinges (h).
□Through two bolts (e) connect knob (f) with the door (G and H) ,
the same assembling step for the other knob (f).
g
h
e
f
B
A
A
E
G
H

8
Assembly (continued)
To adjust the vertical height.
Loosen the four screws "A" on both hinges.
Two of them are usually in slotted holes which
mean and you can adjust up or down by a few
mm. Then tighten back up
To adjust depth.
Loosen screw "B" and adjust door, if the door
can not be adjusted, please loosen screw "C",
then try again.
Tighten screw "B" and "C".
To adjust side ways.
Turning the screw "C" on BOTH hinges on
each door.

9
Assembly (continued)
6Connection the 2-Door Wall Cabinet and the Storage Cabinet (option)
□Using two matel dowels (i) to fix the position of the 2-door wall cabinet and the storage cabinet.
Warning:
Make sure put the 2-door wall cabinet with knob under of
the doors，if not this step may damage to the adjustable
shelf and not connect the 2-door wall cabinet and the
storage cabinet.
i
i
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.

10
Assembly (continued)
7Securing the cabinets to the wood wall (option)
□Drill 2/16" diameter holes (2.5mm) in the wood wall , corresponding to the hight of the cross bars (D) holes ,through cross bars
hole using four 3" screws (k) tightening the 2-door wall cabinet onto the wood wall hole.
NOTE: Fasten cabinets to the dry wall using the appropriate 3"
screws and wall anchors (not supplied) through the hanging back
rails and into wood studs. First drill a pilot hole in the cabinet
hanging rails in line with location of the all wood studs.
D
D
D
k