Haneco PANORAMA10W User manual

PANORAMA
HANECO LED SECURITY LIGHT INSTALLATION GUIDE
For more information
www.haneco.com.au
[phone]
Sensor Function
• When the LUX dial is turned to the sun symbol, the light will operate in any
light. To have it only operate when it is dark (less than 10 lux), turn the dial to
the moon symbol.
• The SENS dial adjusts detection distance. The lowest setting is 1m, which can
be increased to 5m by turning the dial to the + symbol.
• The time the light remains on can be adjusted from approximately 2 seconds
to approximately 10 minutes.
•
three seconds. This overrides the sensor and allows the light to remain on when switched on.
Manual Override Function
Test
When testing in daylight, set the TIME dial to 2S and the LUX dial to maximum (the sun symbol).
2 seconds.
To set the sensor for night time during the day, turn the LUX dial to minimum and cover the
sensor to simulate darkness.
Product Code: PANORAMA10W
PANORAMA10WS
PANORAMA10W-WH
PANORAMA10WS-WH
PANORAMA20W
PANORAMA20WS
PANORAMA20W-WH
PANORAMA20WS-WH
The luminaire must be installed by a professional electrician.
Ensure input voltage conforms to the voltage range of product.
Ensure wires are securely connected.
Before switching on, ensure that all the wiring is correct.
Warranty is void if product is not installed according to the instructions.
WARNING