Haneco SKYLUX-120W User manual

Thanks for choosing our SKYLUX Highbay.
We strongly recommend that you read this manual carefully before installation.
Product Specication
SKYLUX
HANECO LED HIGHBAY INSTALLATION GUIDE
For more information
www.haneco.com.au
1300 001 LED (533)
Product Dimension
All dimensions in mm
PRODUCT CODE POWER VOLTAGE/
FREQUENCY PF IK RATING IP RATING OPERATING TEMPERATURE NET WEIGHT
SKYLUX-120W 120W
100 - 277V
50Hz - 60Hz >0.9 IK08 IP65 -35 - 50°C
3.0kg
SKYLUX-150W 150W 4.0kg
SKYLUX-200W 200W 5.0kg
SKYLUX-120W SKYLUX-150W
SKYLUX-200W

• Installation must be carried out by a licenced electrician and in accordance
with these instructions and relevant Australian standards and local regulations.
• Ensure input voltage conforms within product specications.
• Ensure wires are securely connected.
• Before switching on, ensure all wires are correctly connected.
• The warranty is void if product is not installed according to the instructions.
Note: Product technical information and specication may change over time without
prior notice. For latest information, please contact our customer service or visit our
website www.haneco.com.au
WARNING
Product Code: SKYLUX-120W
SKYLUX-150W
SKYLUX-200W
Accessories SKYLUX-BRACKET
Code: SKYLUX-MS
SKYLUX-REMOTE
For more information
www.haneco.com.au
1300 001 LED (533)
1. Ensure main supply is switched o before commencing installation.
2. Screw the eye bolt on top of the luminaire.
3. Install optional accessories and desired settings prior luminaire installation. (See table below for available accessories)
4. Install the luminaire onto desired location.
5. Connect power supply using the plug provided. Connect 0-10V dimmable cables to the dimming system if required.
Installation
ART05062019
Accessories (Not included)
PRODUCT CODE
SKYLUX-BRACKET Mounting bracket
SKYLUX-MS Quick-connect microwave motion sensor
SKYLUX-REMOTE Sensor remote controller
Ceiling mount with hook
Ceiling or wall mount with bracket
Not Included (available as accessories)
Mounting holes