Hansaton beat SHD BTE User manual

beat SHD BTE
behind-the-ear
Hearing aid user guide

Hearing aids
beat SHD RS
This user guide applies to the following models: Your hearing aids
Hearing care professional: ____________________
___________________________________________
Telephone: _________________________________
Model: ____________________________________
Serial number: ______________________________
Warranty: __________________________________
Program 1 is for: ____________________________
Program 2 is for: ____________________________
Program 3 is for: ____________________________
Program 4 is for: ____________________________
Date of purchase:____________________________

Quick reference
2 beeps every
30 minutes
Low battery warning Battery size
675
On/O
On (close
battery door) Battery symbol
Changing batteries
Lever
volume control
not activated
Push button
switching programs
volume control
not activated
Plus
(+) signs
O (open
battery door)
Thank you
Thank you for choosing these hearing aids.
Please read the User guide carefully to make sure
that you understand and get the best out of your
hearing aids. Training is not required for handling
of this device. A hearing care professional will
help setup the hearing aids to your individual
preferences during the sales consultation.
For more information regarding features, benets,
setup, use and maintenance or repairs of your
hearing aid and accessories – contact your hearing
care professional or manufacturer representative.
Additional information can be found in the
Specication sheet of your product.

1. Your hearing aids at a glance .................................................. 2
2. Turning your hearingaids onando ..................................... 4
3. Putting your hearing aids on your ears ................................... 5
4. Operating instructions ........................................................... 6
Battery information............................................................12
5. Using the telephone ..............................................................15
6. Accessories .......................................................................... 18
7. Assistive listening devices.................................................... 20
8. Caring for your hearing aids ................................................. 22
9. Troubleshooting guide ......................................................... 27
10. Service and warranty.......................................................... 32
11. Important safety information.............................................. 34
Tinnitus masker ................................................................ 52
12. Operating, transport and storage conditions..................... 55
13. Information and explanation of symbols ........................... 56
14. Compliance information .....................................................60
Table of contents

2 3
beat SHD RS hearing aid
1. Your hearing aids at a glance
2
3
4
5
1
6
1 Earhook - your custom made earmold attaches to
your hearing aids using the earhook
2 Microphones - sound enters your hearing aids via
the microphones. Microphone shield - protects
microphones from dirt & debris
3 Push button - switches between listening
programs or changes the volume level,
depending on your customized tting
4 Lever - controls the volume
5 Battery door/on & o - close the door to turn on
your hearing aids, partly open the door to turn o
your hearing aids. Opening the door all the way
gives you access to change the battery
6 Earmold - allows the sound to pass from the
hearing aids to the ear and holds the hearing
aids in place

4 5
3. Putting your hearing aids on your
ears
Your hearing aids will be color-coded with a
marking on the outside of the hearing aid:
red = right ear; blue = le ear.
1. Hold the earmold between
your thumb and index nger,
with the opening facing
toward your ear canal and
the hearing aid resting
above your ear.
2. Carefully insert the earmold
in your ear. You may need
to twist it slightly to the
back. The earmold should
t into your ear snugly and
comfortably. Gently pull
down and back on your
earlobe to help you insert
the earmold into your ear
canal more easily.
3. Place the hearing aid over
the top of your ear.
2. Turning your hearingaids
onando
The battery door acts as an on and o switch.
1. On: Close the battery door fully.
Note: It may take 5 seconds
before the hearing aid turns
on. Your hearing healthcare
provider can additionally
increase the start up delay
ifrequired.
2. O: Partially open the
battery door.
3. Open: Fully open the
battery door to access
andchange the battery.
Note: When turning your hearing aid on and o
while it is on the ear, grasp the top and bottom
of the device with your index nger and thumb.
Use your thumb to open and close the battery
door.
1.
2.
3.
o
2.
1.
on

6 7
Tamper-resistant cover
Some hearing aids are tted with
tamper-resistant covers instead of
levers to prevent someone from
accidentally adjusting the hearing aids.
The cover can still be used to make
adjustments but it requires using a
ngernail or a small tool to push up or
down.
Push button
Your hearing aids are equipped with
a push button which can be set for
switching between programs or to
adjust your volume.
4. Operating instructions
Your hearing aids come with two controls that
allow you to further adjust your hearing aids – a
lever and a push button.
Lever
The lever on your hearing aids can be set up as
a volume control.
Press up to increase the volume; press down
to decrease the volume. As you change the
volume level, your hearing aids will beep.
Volume setting Beeps
Recommended volume level 1 beep
Turning volume up short beep
Turning volume down short beep
Maximum volume level 2 beeps
Minimum volume level 2 beeps

8 9
Volume control
If the push button has been congured as a
volume control:
• Push the button on your right hearing aid to
increase the volume in both hearing aids.
• Push the button on your le hearing aid to
decrease the volume in both hearing aids.
Volume setting Beeps
Recommended volume level 1 beep
Turning volume up short beep
Turning volume down short beep
Maximum volume level 2 beeps
Minimum volume level 2 beeps
Program control
If the push button has been congured as a
program control, each time you push the button,
you will move to a new hearing aid program.
Your hearing aids beep to indicate which
program you are in.
Program setting Beeps
Program 1 (e.g. automatic program) 1 beep
Program 2 (e.g. speech in noise) 2 beeps
Program 3 (e.g. easy telephone/
telephone)
3 beeps
Program 4 (e.g. music) 4 beeps
Easy telephone/telephone short melody
Auto phone short melody
Wireless synchronization
(if enabled)
Opposite ear beeps
the same as side
being adjusted

10 11
Wireless synchronization
If Wireless synchronization is enabled, when you
change the volume or program settings on one
hearing aid, the other one changes as well.
For example, if your push button is congured as
a program control and Wireless synchronization
is enabled, when you push the button on one
hearing aid, the program will change on both
hearing aids.
Remote control 
Your hearing aids may also come with an
optional remote control which allows you to
switch between dierent listening programs,
and change your volume.
Tinnitus masker
If your hearing healthcare professional has
congured both a tinnitus masker program and
a volume control, you can adjust the tinnitus
masker level while you are in the tinnitus masker
program. To adjust the noise level, either:
Rocker switch
• Push up on the rocker switch to increase
the tinnitus masker, and
• Push down on the rocker switch to
decrease the tinnitus masker
Push button (right/le)
• Push the button on your right hearing aid to
increase the tinnitus masker, and
• Push the button on your le hearing aid to
decrease the tinnitus masker
Push button (steps)
• Push the button to step through your
tinnitus masker volume levels
As you change the level, your hearing aids will
beep.

12 13
Replacing the battery
1. Gently swing out the battery
door with your ngernail.
2. Grasp the battery with your
thumb and index nger and
remove.
3. Insert the new battery into the
battery compartment with the
plus (+) sign on the battery
facing the same way as the
plus (+) sign on the side of the
battery door. This will ensure
that the battery door closes
properly.
Note: If the battery is inserted
incorrectly, the hearing aid will
not turn on.
4. Close the battery door.
Battery information
Low battery warning
Two long beeps indicate the hearing aid
battery is low. Aer the low battery warning,
sounds may not be as clear. This is normal and
can be xed by changing the batteries.
If you can’t hear the low battery warning, your
hearing healthcare professional can change its
pitch or loudness.
Your hearing aids are designed to generate
a low battery warning every 30 minutes until
you change the batteries, but depending
on the condition of the batteries, they may
die before another low battery warning
occurs. Therefore, it is recommended that the
batteries are replaced as soon as possible
once you hear the low battery warning.
2.
3.
1.
4.

14 15
5. Using the telephone
Push button
Your hearing healthcare professional may have
set up a phone program on your hearing aids
that you can access using the push button or
optional remote control.
Easy telephone
Your hearing aids may also have a telephone
feature, which automatically switches to a
dedicated telephone program when a telephone
receiver is brought close to one of your hearing
aids. You will hear a short melody when you
switch to the easy telephone program. When
the telephone receiver is moved away from the
hearing aid it will automatically return to the
previous listening program.
If your hearing aid doesn’t automatically switch
to the easy telephone program when a receiver
is held to your ear, you may need to attach an
easy telephone magnet to your telephone. The
magnet is designed to strengthen the magnetic
eld at the earpiece of the telephone.
Caring for batteries
• Always discard batteries in a safe and
environmentally friendly way.
• To prolong battery life, remember to turn your
hearing aids o when not in use, especially
when asleep.
• Remove the batteries and keep the battery door
open while hearing aids are not being worn,
especially when asleep. This will allow internal
moisture to evaporate.

16 17
Binaural Phone
The Binaural Phone feature allows you to hold a
phone to one ear and hear the sound clearly in
both ears. No accessories are required.
Binaural Phone is available in your hearing aids
through:
Push button
Easy telephone
If your hearing aids are congured to work with
the wireless uDirect™ streamer, you might
benet from a Bluetooth®hands-free option.
Refer to the uDirect  user guide for more
information.
To attach the optional magnet:
1. Clean the telephone receiver.
Hold the magnet near
the “listening end” of your
telephone receiver and release
it. The magnet will flip to the
appropriate side and seek
the optimal position on the
telephone receiver.
2. Place the double-sided tape
in this optimal position on the
telephone receiver.
3. Attach the magnet to the tape.
Your hearing healthcare
professional may also have set up a phone
program that you can access through your
optional remote control.
1.
2.
3.
Bluetooth®is a registered trademark owned by the Bluetooth SIG, Inc.

18 19
For information on how to get a streamer or
uT V accessory, please contact your hearing
healthcare professional.
Remote control 
Your hearing aids may also come with an
optional remote control which allows you to
switch between dierent listening programs,
and change your volume settings.
6. Accessories
The uDirect ,uT V™ and a remote control are
optional accessories that may be available for
your hearing aids.
uDirect 
uDirect provides easy, hands-free access to
Bluetooth enabled devices, such as mobile
phones. It can provide remote control functions
to adjust your hearing aids for increased
listening comfort. uDirect also has a wired
audio jack to plug in devices like MP3 players
and a DAI input to plug in an FM receiver.
and uTV 
uT V is used with a uDirect to send sound
from your TV directly to your hearing aids. The
uT V can also transmit sound from stereo
systems, computers and other audio sources.
For more information on using the uDirect ,
or uTV , please see the user guide for that
accessory.

20 21
When your hearing aids detect a DAI signal,
they switch to your auto phone program
automatically. A short melody indicates that
auto phone is active. When you disconnect the
DAI, your hearing aids return to the previous
program automatically.
Ask your hearing healthcare professional
for information about the DAI system and a
connector cord.
7. Assistive listening devices
Listening in public places
Telecoils pick up electromagnetic
energy and convert it into sound. Your
hearing aid’s telecoil option can help
you listen in public places equipped
with telecoil compatible assistive listening
devices such as a loop system.
When you see this symbol, a loop system is
present and it is compatible with your hearing
aid. Please contact your hearing healthcare
professional for more information on loop
systems.
Connecting to external audio sources
Your hearing aids may have a direct audio input
(DAI) to connect to other audio sources, such
as a stereo or television, using an FM system
or a cable. The uDirect , an optional wireless
accessory, also has a DAI jack.

22 23
• Protect your hearing aids from excessive heat
(hair dryer, vehicle glove box or dashboard).
• Ensure you do not twist or squeeze the wires
when your hearing aids are placed in their
case.
• Regular use of a dehumidier, such as a Clean
Dry kit, can help prevent corrosion and prolong
the life of your hearing aids. Remove batteries
before using a dehumidier.
• Do not drop your hearing aids or knock them
against hard surfaces.
8. Caring for your hearing aids
Protecting your hearing aids
• Diligent and routine care of your hearing aids
contribute to outstanding performance and a
long service life. To ensure a long service life,
Sonova AG provides a minimum of a ve year
service period aer phase out of the respective
hearing aid.
• Open the battery doors when not in use.
• Always remove your hearing aids when
using hair care products. The hearing aids
can become clogged and cease to function
properly.
• Do not wear your hearing aids in the bath or
shower or immerse them in water.
• If your hearing aids do become wet, do not
attempt to dry them in an oven or microwave.
Do not adjust any controls. Open the battery
doors immediately, remove the batteries and
allow your hearing aids to dry naturally for
24hours.

24 25
Cleaning your earmolds
Clean the earmold and the outside of the
earhook with a damp cloth at the end of each
day. Avoid getting any water in the hearing aids.
Do not use alcohol to clean your earmolds.
If the earmolds become plugged, clear the
opening with a wax loop or pipe cleaner.
If your physician prescribes eardrops, clean
any moisture that may get into the earmolds or
tubing to prevent plugging.
Cleaning your hearing aids
Use a so cloth to clean your
hearing aids at the end of
each day. Regular cleaning of
the microphone ports with
the supplied cleaning brush
will ensure that your hearing
aids will maintain their sound quality. Your
hearing care professional can demonstrate this
for you.
Place the hearing aids in the case overnight
with the battery doors open to allow moisture to
evaporate.
Ear wax is natural and common. Ensuring your
hearing aids are free of ear wax is an important
step in your daily cleaning and maintenance
routine.
Never use alcohol to clean your hearing aids,
earmolds or domes.
Do not use sharp tools to dislodge ear wax.
Sticking household items into your hearing
aids or earmolds can seriously damage them.

26 27
If the earmolds require further cleaning:
1. Disconnect the plastic tube from the hook of
the hearing aid, by holding the hearing aid in
one hand and gently pulling the tubing away
from the earhook.
2. Wash only the earmolds and tubing in warm
water with a mild soap.
3. Rinse them with cool water and dry overnight.
4. Make sure the earmold tubes are completely
dry. Reconnect them to the earhook on your
hearing aid by sliding the tubing back on
to the earhook. Use of a hearing aid blower
can assist with removing moisture/debris
from the tube. See your hearing healthcare
professional for more information.
Cause Possible remedy
Issue: No sound
Not turned on Turn on
Low/dead battery Replace battery
Poor battery contact Consult your hearing care
professional
Battery upside down Insert battery plus (+) side
up
Earmolds blocked with
ear wax
Clean earmolds. See “Caring
for your hearing aids”.
Consult your hearing care
professional
Plugged microphone
shield
Consult your hearing care
professional
9. Troubleshooting guide

28 29
Cause Possible remedy
Issue: Not loud enough
Low volume Turn up volume; see hearing
healthcare professional if
problem persists
Low battery Replace battery
Earmolds not inserted
properly
See “Putting your hearing
aids on your ears”. Reinsert
carefully
Change in hearing Consult your hearing care
professional
Earmolds blocked with
ear wax
Clean earmolds. See
“Caring for your hearing
aids”. Consult your hearing
care professional
Plugged microphone
shield
Consult your hearing care
professional
Cause Possible remedy
Issue: Intermittent
Low battery Replace battery
Dirty battery contact Consult your hearing care
professional
Issue: Two long beeps
Low battery Replace battery
Issue: Whistling
Earmolds not inserted
properly
See “Putting your hearing
aids on your ears”. Reinsert
carefully
Hand/clothing near ear Move hand/clothing away
from your ear
Poorly tting earmolds Consult your hearing care
professional

30 31
Cause Possible remedy
Issue: Not clear, distorted
Poorly tting earmolds Consult your hearing care
professional
Earmolds blocked with
ear wax
Clean earmolds. See “Caring
for your hearing aids”.
Consult your hearing care
professional
Low battery Replace battery
Plugged microphone
shield
Consult your hearing care
professional
Issue: Earmolds falling out of ear
Poorly tting earmolds Consult your hearing care
professional
Earmolds not inserted
properly
See “Putting your hearing
aids on your ears”. Reinsert
carefully
Cause Possible remedy
Issue: Weak on the telephone
Telephone not
positioned properly
Move telephone receiver
around ear for clearer signal.
Hearing aid requires
adjustment
Consult your hearing care
professional
For any problems not listed in the guide, contact your
hearing care professional.

32 33
10. Service and warranty
Local warranty
Please ask the hearing care professional where
you purchased your hearing aids about the
terms of the local warranty.
International warranty
Sonova AG oers a one year limited international
warranty, valid from the date of purchase. This
limited warranty covers manufacturing and
material defects in the hearing aid, but not
accessories such as tubes, wires, earpieces, or
external speaker. The warranty only comes into
force if a proof of purchase is shown.
The international warranty does not aect
any legal rights that you might have under
applicable national legislation governing sale of
consumer goods.
Warranty limitation
This warranty does not cover damage from
improper handling or care, exposure to
chemicals or undue stress. Damage caused
by third parties or non-authorized service
centers renders the warranty null and void.
This warranty does not include any services
performed by a hearing care professional in their
oce.
Serial numbers
Hearing aid le side:
Hearing aid right side:
Date of purchase:
Authorized hearing care professional
(stamp/signature):