Hansaton uDirect 2 User manual

uDirect™2
Pairing
Press and hold the ( ) and ( ) buttons
simultaneously for 2 seconds.
Wait for the blue blinking light.
The uDirect 2 pairing code is 0000.
2 sec Blue blink
The power indicator shows the following:
Green for 2 seconds Switching ON
Blink red then solid
for 2 seconds
Switching OFF
Slow blink green Normal operation
Short blink red <20% battery left
Please charge
No blinking aer
switching ON
Charge for at least 2
hours
Battery indicator lights
Solid orange Audio jack or FM streaming
Solid blue Bluetooth®phone or music
streaming
Slow blink blue 1 Bluetooth device connected
Double-blink blue 2 Bluetooth devices con-
nected
Very fast blink
blue
Bluetooth pairing
Solid violet Demo sound playing
Audio indicator lights
® Bluetooth is a registered trademark of Bluetooth SIG Inc.
Hton_uDirect2_QuikReference_GB.indd 1 10.04.15 11:12

On/O
switch
uDirect™ 2 button functions
Button Button
Connect
button
Short press:
• DECT call
Long press (2 seconds):
Voice dial
• During call: Hold
Home
button
• Return home to
startup program
(A) Access button
Short press:
Program toggle/Audio source toggle
• Receiving call: Accept call
• During call: Hang up
• FM signal: Accept
Long press (2 seconds):
Redial
• Receiving call: Reject call
During call: Transfer call back to phone
• FM signal: Hold
Louder Volume control Softer
Note: Features with checked boxes have been en-
abled by your hearing healthcare professional.
Press
simultaneously
to lock or unlock
(A) buttons
DD-SP
92192
Hton_uDirect2_QuikReference_GB.indd 2 10.04.15 11:12